How can we change Cost Center in Material document(MIGO).

Dear Experts,
Wrong cost center selected in Purchase order, the same copied into" MIGO" document,
now i need to maintain right cost center .
please guide me, to change cost center.

Hi
If the PO is completely delivered, simply go to KB11N and transfer the value from old cost center to new cost center
If you are yet to receive the goods, reverse the MIGO, change the PO and do MIGO again
Regards
Ajay M

Similar Messages

How can define the cost center (department) manager?

We are on 11.5.0.10
Financials implementation is done(GL,AP,AR,FA,IA)
In iAssets System, we want to set up the approval method to use "cost center-based approvals". (For cost center-based approvals to work properly, each cost center must have a manager defined.)
How can define the cost center (department) manager? Thanks.

I believe this is done in the organization definition screen. For each organization, we attach a classification "Company Cost Centre" (the same place where we attach the classification operating unit, inv org etc). In the others section, there are 2 additional information - GL company cost centre and reporting information. In the GL company cost, you need to attach the balancing segment value and the cost centre value. In the reporting information, you need to attach the manager for that organization. This ay the relationship between the cost centre and manager is created.
Hope this clarifies.
Vinit

How can I change one section of the document to a landscape orientation and not the whole document?

How can I change one section of the document to a landscape orientation and not the whole document?

Page Setup, including page orientation, is done in the File menu. The setting applies to the whole document. As Peter says, you can rotate the contents of a page (not including the text layer of a word processing document).
As an alternative, you could use Numbers, where Sheets are empty canvases onto which you may place images, charts, tables and text boxes, and where page orientation may be set for individual Sheets. The main tradeoff is that you lose many of the built-in word processing and page layout features of Pages.
Regards,
Barry

Could not changed cost center field in document type RE - FSG

Dear Experts,
I would like to change 'cost center field' in act document type RE (invoice receipt) through transaction FB02
I have changed the field of 'cost center' in field status group in OBC4 and OB41 (posting key 50 and 86)
The field staus group both in OB41 and OBC4 are already set as 'optional entry' but field of cost center is still could not be changed/edit (grey area).
Kindly advice
Thank you.

Hi Chandra,
Can you please details the coding part if you can remember ..so that would be helping me lot...Since it's production issue , we have implement immd.
Regards,
Lalit
Edited by: Lalit Sharma on Dec 24, 2009 6:45 AM
=======================
This problem can be closed. I got the note.
Edited by: Lalit Sharma on Jan 12, 2010 12:50 AM

Where to change the cost center in material document?

Hi everyone,
I have a problem. Last month, I've created a new business area, with its own division and cost center.
In the test client, the whole process of creating requisition, PO, goods receive, cancel goods receive (return to vendor), create sales order, delivery and goods issue went well.
But, today, when one of my users tried to cancel goods receive (movement type 102), the following error message was displayed:
KMXX/KM11 CTR belong to business area M110 not M140.
Since the PO was created for a stock item, there is no account assignment, so I am wondering if I have missed out something in configuration, especially in defining account assignment for automatic posting? Can anyone help?
Thank you very much.
Anisah

HI,
There should have been some changes done in the system after thr initial docs were created.
Please ensure that the said cost centre of interest is assigned to the appropriate Business area.
The error seems to be an invalid combination of the Business area to the cost centre.
If not then please maintain the same.
Hope this helps.
Regards,
Prasanna
Award pls if helpful.

How can we restrict Cost Center Company Code wise in Equiment Master (IE01)

Hello Experts,
Here is one requirement is to restrict cost center in equiment master (IE01) However SAP System is behaving as per SAP Standard function.
Please see screen shot to understnad better my requirement.
I want to pass relevant cost center in equipment master which lies in relavant company code. Like if company code is 1000 in equipment master then only 1000 company code cost center should be enter and if user enterd any other company code cost center then SAP System should show error message.
While in current in SAP Standard functionality is to show just warning message and allow entering cost center whether it is from different company code.
Like in below screen it showing error only if Cost center is from different company code. It should be not allowed to enter other company code cost center.
Please guide how to solve this issue.
Message was edited by: Inderjeet Pal

Try this code in the include ZXEQMU02 of Enhancement IEQM0003 to achieve the desired check.
DATA:V_BUKRS TYPE ILOA-BUKRS.
CLEAR V_BUKRS.
SELECT SINGLE BUKRS FROM CSKS INTO V_BUKRS
   WHERE KOSTL = DATA_ILOA-KOSTL.
IF V_BUKRS IS INITIAL.
   MESSAGE: 'Cost Center and Company code do not match' TYPE 'I'.
   RAISE POSTING_NOT_ALLOWED.
ENDIF.
Consult your ABAPer in case any finetuning of the code is required.
Jogeswara Rao K

How can I get Notification Number from Material Document?

Can you please tell me that how can I get Notificatin Number(QMEL-QMNUM) from Material Document(MSEG-BELNR)?
Regards,
Subhasish

This question is closed but unanswered.

Cost Center on Material document

Created a free goods order with a order reason code and generated a material document, the cost center is empty. I have checked that the order reason code is linked to a cost center.

I am looking at the cost center field and it is empty.. would anyone know the reason?

How can I change Cost Code (WBS Code) separator?

Hi,
I was thinking that cost code separator is always dash "-".
But in our Demo database I saw that code separator is slash "/"
Where can I set the separator for cost codes?

There is a data definition called Cost Code Separator. You can change the default value to what you want the separator to be.

How can I change the language in a document?

I am typing a document in Spanish, but I want to be able to use the spelling check feature. I just can't find where to change the language only in this document without having to change the entire system. Help?

There are a lot of settings in something as complex as Pages but I (mostly) admire the organisation.
Both the Menus and the Inspectors burrow down from the whole document down to the detail, working left to right, top to bottom.
Once you know this, just follow the logical trail, in this case Inspector > Text > More > Language
Peter

HT4314 I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

By "game center account", do you mean Apple ID?
If so, you can change it.
1. Tap settings and navigate to iTunes and App Stores
2. Tap "Apple ID" and then tap "Sign Out"
3. Log in with a different ID.

How can I change the name of a Materialized View?

How can I change the name of a Materialized View?

Oracle permitted renaming the snapshot in the earlier versions of 8i. However, it does not permit renaming the materialized view in 9i or 10g.
SQL> rename mymatview to mymatview2;
rename mymatview to mymatview2
ERROR at line 1:
ORA-32318: cannot rename a materialized view
SQL> disconnect
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - 64bit Production
With the Partitioning, Oracle Label Security, OLAP and Data Mining options
SQL> rename mymatview to mymatview2;
rename mymatview to mymatview2
ERROR at line 1:
ORA-32318: cannot rename a materialized view
SQL> disconnect
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.3.0 - Production

Repeat depreciation run can change cost center in GL a/c or not?

Hi Gurus,
I have hit the following issue.
Fixed Asset 1 originally assigned to CC-01 for month of March.
And my user has run depreciation for March already.
Later she changed cost center to CC-02.
Then she repeat depreciation run for the month of March, from the depreciation result shows the new cost center CC-02.
But there is no document generated and thus from corresponding GL account, there is no change, still point to CC-01.Which means CC-02 has not been posted to GL account yet.
May I please know if repeat depreciation run can change cost center in GL a/c or not?
If cannot, what should be the correct way to post the new cost center in GL?
Thanks a lot.
Best Regards
Li Juan

Hi, I have tried the method you mentioned.
I managed to generate the new document (Message shows: Document is posted under number 7500000000).
So can I say that repeat depreciation run cannot change cost center for corresponding cost element?
Everytime user has to do manual posting.
Thanks a lot.
Rgs
Lijuan

How can we change the item cost at time of Inventory Transfer, thru SDK?

Hi All,
How can we change the item cost at time of Inventory Transfer, thru SDK?
My client wants some items to be transferred from A warehouse to B warehouse. When they transfer , they have to pay some octroi charges. This octroi charges they want to include in item cost at time of Inventory Transfer.
How do we give this additional cost effect in item cost at the time of Inventory transfer? Please help .
regrds,
Binita

Binita,
This question was posted earlier and was replied. If you want to do this through SDK please post the question to the SDK Forum.
Which ever route you take (SDK or manual within the system), you still have to follow the process steps involved.
Step 1: Transfer the goods
Step 2: Revaluate the Goods on WH B to reflect Octroi
Suda

How can we change the valuation type for a material created.

How can we change the valuation type for a material created.
Note : All open orders are closed for this material.3
Please guide

Hi,
You can change valuation class, or you can set valuation category for your material master. If valuation category is set you can extend your material master and in this way creating records for different valuation types.
Please try to set the desired changes in your mmr (MM02) > save > SAP will give you error message > push 'Display error' button and you will see what conditions must be eliminated to carry out the change.
- you are not allowed to have open transactional data
- no stock in the current and previous period (using proper posting date in MB1A + 201 you can reduce your stock level to 0, and after that you can set it back by MB1A + 202)
- in case of valuation category setting batch archiving may be necessary
BR
Csaba

How can we change Cost Center in Material document(MIGO).

Similar Messages

Maybe you are looking for