How can we change SALES AREA in our sales order (VA01) ?

suppose i have created a sales order in VA01 by taking a sales area BP01 01 00, and after saving, it generates a sales 0rder number.
but after creating, i realize that the customer i have taken in the sales order, is wrong.
we change the customer in the sales order via VA02, but the sales order is not accepting the customer because its(customer) sales area is BP01 02 00.
one way is to extend the customer for BP01 01 00.
but i need the sales area BP 02 00 in my sales order, how can i change the sales area from BP01 01 00 to BP01 02 00 in our sales order?
thanx in advance.

Hi,
After extending the customer all your can do is delete your earlier order and create a new order.
The sales order no generated previously by the system gets wasted/archived.
Regards,
Amit

Similar Messages

How can i change unit of measurement in sales order on header

Dear all,
I have material master with base unit of measurement " Ea ".
I have to take unit Pc in sales order.
how can i change unit on header in sales order.
i changed unit on line item in sales order by setting in sales unit field in material master.

Hi,
You can very well do it, please do the following steps,
Go to material master and select the Sales Org.1 and 2, here maintain the sales unit PC and
it will ask you for the conversion, so maintain your conversion for PC to EA. Then maintain
the Division, delivery plant, material pricing group and account assignment group(if not maintained) and save it
Now create the sales order for that resp. material, you will find that system will pick up
the sales unit which is maintained in the material master's sales orgnization tab.
For this you need not to change at the header level of sales order
Please check and revert.
Thanks,
Hrishi

How can I change the area code for DVD's?

I brought some DVD's from Germany and watched them on my Mac Pro. After the DVD was involved in the drive I have to change the area code for the drive. I don't know why but I did it. I could watch the film. Today I like to watch a DVD from US but after the DVD was involved I got a message "the area code does'nt match the DVD code" and I can not change the area code.
What can I do to watch both arts of DVD's. Isn't that normal to have DVD's all over the world?

Here is the bit that Bengt forgot to answer!
DVD Player: About DVD-Video Regions
Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have changed the region settingon your Mac five times it is set in stone for ever.
Try using VLC for playback instead:
http://www.videolan.org/vlc/

HT201184 I do not know the sign-in name & password on my eMac to be able to use it. How can I change the password & sign-in in order to use the computer?

I do not know the sign-in & password to able to use my eMac computer. How can I change the info so I can use it?

OS X: Changing or resetting an account password

HT1918 how can I change my payment on an existing order?

how can I change my cc payment on an existing order?

There's probably nothing you can do about it other than to reimburse your company, but go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Perhaps there will be something they can do for you.
Regards.

MTO --- How can one verify costs are tracked at sales order level

PP members:
In MTO -- costs are tracked at sales order level, how can one verify that costs are tracked at sales order level
Are there any settings/fields in master data to look into for <b>identifying costs at sales order level</b>,
Thanks for your time

Hi suren,
on the top you will see "sales document" "edit" "goto" and then you have "extras".
On the dropdown you will see "costing".
Regards,
Satyajit

How can I change the name of our podcasts

In the podcst directory ours is listed as: liberty-baptist-church-sermons/id719265104
How can I chnage that to read the real name of the program: The Liberty Pulpit
Frank Chyz
Media Director
Liberty Baptist Church
Ellenboro, NC

You have created your feed in WordPress; you need to change the title wherever you originally entered it in WordPress, but I can't advise on specifics. Once done, just republish the feed. The Store will take a couple of days or so toe catch up.

How can i change Personal area

Hi We hired a person accidentally we put wrong personnel area.
When i goto pa30 change it is not in editable mode
How can i do ?
please explain

HI Padmaja,
The Best way to maintain PA is to Run an Action through PA40.. Chose an action type like Change in Org Assignment.....
Have an action reason maintained as Change in PA/PSA.
Change the PA on the IT0000 Screen....
This will call for IT 0001 screen and maintain PSA..
This would be the best option as you can keep the History as to when the PA was changed....
Good Luck !!!
Kumarpal Jain.

How can I change the material group in purchase order?

Hello,
I' ve changed the group of material and is not updated in the purchase order created. Is there any way you see the new material groupl in purchase order?
Thanks,

Sorry for the late answer.
Jeyakanthan A's suggestion may be good in case of few items.
You can also mass maintain purchase order material groups (EKPO-MATKL) in transaction MEMASSPO, though they are only in display mode in the purchase order transactions. If it doesn't work, you'll get a reason why.

How can I change the password in the iBook donated to our nonprofit. No password was given with the iBook? We need to put in printer and other software. Help, we can use the laptop without changing the password.

How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.

If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck!

When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my account keeps popping up on his phone. How can we change the ID on his phone?

When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my apple ID email address keeps popping up on his phone when he tries to download an app. We do not want to have all of the same apps on our phones. How can we change the ID on his phone? I already tried going to Settings>iTunes &App Store> and changing the Apple ID to his account email and that did not solve the problem. To make things worse, I recently changed my Apple ID email address (without getting a new ID) and I do not remember my old password (and this is the address that is popping up on his phone). He does not have any music on his phone and all of the Apps that he has are free. Any help you could offer would be great (-:

All apps are forever tied to the Apple ID that bought them. To stop your id from popping up, you need to delete the apps on his phone, and then repurchase them under his account.

My teenage daughter and i share an apple id on both of our iphones. she now has an ipad with a her own apple id. How can we change the apple id on her phoneand not loose any contacts or songs?

My teenage daughter and i share an apple id on both of our iphones (2 phones both are 5s) . She now has an ipad with a her own apple id. How can we change the apple id on her phone so that is the same as the ipad and not loose any contacts or songs?

Did you take a look at the new feature Apple - iOS 8 - Family Sharing ?
Apple - iCloud - Family Sharing
Up to now, songs bought from iTunes could only be played by the Apple ID that has been used to buy them.
If you set up Family Sharing, your daughter can also play your songs and use the same contact info as before.
If you don't want to do that, sync the contact info to the address book on your computer, and sync the info back, using iTunes:
Sync your iPhone, iPad and iPod with iTunes using USB
If the iPad already has her Apple ID and contact info on it, restore the phone from the latest iPad backup.

How can I change how email "from" and "to" are being handled by Groupware?

When a follow-up business activity (e.g. sales visit) is created in CRM and assigned to another by the "person responsible" field, it triggers the following action in Outlook:
u2022 Outlook recognizes that "created by" and "person responsible" are different
u2022 This recognition triggers sending an email invitation for an appointment
u2022Groupware presents / Outllok reads the "person responsible" to populate "from" Email field and "created by" to populate "to" Email field
u2022Outlook Email invitation is received by creator of the assigned follow-up (confusing the user since they are naturally thinking that the person they made responsible for the follow-up would need to accept the assignment)
How can I change how the email "from" and "to" are being handled by Groupware/Outlook ... in standard functionality? ... In custom work?
Edited by: Daniel A. Joseph on Jul 24, 2008 4:00 PM

Welcome to the Apple Community.
If you have a @me.com address, you can change the address you use to send email from using the drop down box in the from field in your email.

My fiance logged onto my iphone with his apple ID and now I can't switch it back to my username. How can I change it back to mine? ( but when I go to setting,icloud my un/pw are there)

My fiance logged into my iphone with his apple ID and now I can't switch it back to my username. When I go to buy an app his username is in an editable format to beable to change it back to mine. How can I change it back to mine? (when I go to setting,icloud my un/pw are there) Can someone please help? Thanks!

Had you looked in the User Guide, you would have found this: Settings>Store. Tap on AppleID to change.

My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?

My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?
I've changed the bill payer to myself but it stills says on emails that I sent that its from my mother.

In order for the "From" field to show you options on the "from" addresses available, you must set them up in the Preferences > Accounts first.
I can't show you a screen shot of the from field because I currently only have one account, so the from address used is the default. However, when I had more than one, then options will show up in your compose/reply window.
You'd need to add an account here:

How can we change SALES AREA in our sales order (VA01) ?

Similar Messages

Maybe you are looking for