How can we delete a process chain?

Dear Ones,
By Mistake I have converted an infopackage group into process chain in Quality system. How can we delete a process chain?
Thanks,
Raj

Hi Bhanu,
I've doubt that what is the difference between cancel with core and cancel without core with respect to process chain.
Could you please advice how do we start a process chain daily without using the schedular window for transaction data.
Thanks in advance...
Amarnath.

Similar Messages

How can we set a process chain to trigger the nodes w/o manual intervention

SDNers,
We have a Master PC which has the loading & activation of some Hierarchies.Wats happening is some of the hier activations are failing (we got track of the root cause as well) and the nodes below are not getting triggered automatically, eventhough they have been designed to get triggered irrespective of success or failure of this hierarchy activation. The chain prompts for the u2018Status change & trigger the following eventsu2019 opo-up and only when it was said u2018yesu2019, the subsequent node gets triggered in the chain. If this manual intervention was not there, the Chain gets struck at the activation node, whic is running in yellow status for long, though a short dump - error has already been thrown.
My query is how can we set a process chain not to anticipate the manual intervention of chnaging the status & trigger events pop-up

Hi ravi,
i'm not sure abt the query but what i got thru ur qustion is u have to automtaically go to the next load/step even the proceess chain fails in the step......
for that we have the same master meta chains with link of so many local chains...for this even if there are some interventions/fails in between the process chains it never gets stopped....
it goes to the next step and we'll work, analyse and finish the failed load manually....the next day it'll be
fine...
b4 to this make sure that there is no dependency for the previous loads....
And now the solution i found for this is in the process chain design itself.......
while giving the links itself we'll be getting the options as status RED,GREEN and RED(or)GREEN.....now if u got for the third option the event goes to the next step even it is unsuceesful....
rgds,
nkr.

How can u know the process chain total time, individual time?

Hi guru's
How can u know the process chain total time, individual time?
and what options will available in sm37?
Thanks
prabha reddy

Hi Prabha
Iam not very sure about total time and individual times.
But you can go to tcode rspcm for monitoring the daily process chains. it gives you details like 1. status 2.start date & time 3. Log ID of each process chain.
or you can go to log view of particular individual chain to know how long it has run.
SM37: tcode for simple job selection.
here you check the status of job.
you can select for certain conditions like
1. scheduled
2. released
3. ready
4.active
5. cancelled
Assign points if it was helpful
Revert back if you need further info/
regards
AP

How can i end the Process chain based on some condition

HI All,
I have a scenario where i have a main pc chain which call the new chain at the end which in turn again call pc1. So its more like a closed loop .
pc1-->pc2->pc1
What main chain does is it reads some field value from a dso and assign that to some variable and set some flag to identify that value has been used. My second chain just run the report using the same variables assign by first chain. Now i have to design the main chain such that when all the values have been read from the dso, it should exit and should not trigger 2nd chain. How can i achieve this scenario.
Thanks
Prashant

Hi,
For this try using Process Type-"Decision between multiple Alternatives" in your main chain.It helps you the set condieion based on some formulas
Pls refer links
Decision Between Multiple Alternatives
thanks
nilesh
Edited by: npathak on Aug 11, 2010 1:16 PM

How can i understand the Process Chain management in real time!!!

Hi,
now i am learning BW concepts. now i would like to know the real time scenarios regarding Process chains. can any body help me in this matter?.
thanks,
stikanth.ch

Hi,
A process chain is a defined sequence of interdependent processes required to perform acomplex task in an SAPBW environment. Data maintenance tasks in SAPBW are notrestricted to uploading data. Aggregate rollups, index maintenance, master data and ODS activation, and a variety of other jobs are required to update data, guarantee best-possible performance, and maintain data integrity. Typical SAPBW implementa-tions have complex interdependent networks of jobs in place that run every night, week,or month.Previous releases of SAPBW did not provide an integrated solution for scheduling and monitoring those kinds of job networks. This has changed with the introduction of process chains in release 3.0. Process chains allow you to define complex job networks consisting of standard SAPBW jobs, as well as custom jobs; they support visualizing the job network and centrally controlling and monitoring the processes.
(from "Mastering the SAP BIW")
New Features in BI 2004s Process Chains
/people/mallikarjuna.reddy7/blog/2007/02/08/new-features-in-bi-2004s-process-chains
Designing
/people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
Process chain creation in 2004s - step by step
/people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
http://help.sap.com/saphelp_erp2005/helpdata/en/87/13843b74f7be0fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Try Searching in SDN for this Topic and you will find much detailed info as this is discussed very frequently.
Hope this helps.
Thanks,
JituK

How can I delete a Process black in InDesign?

I'm trying to delete a black in my newsletter because it shouldn't be used. It is a two color job, but i cannot delete it and I'm not sure how to find out where it is being used. I've tried to view the seperations, yet it doesn't show up anywhere in my work. Thank you for any help.

You cannot delete Black swatch in InDesign.
If you have viewed it in the Separations and it doesn't show up - then don't worry about it - it's not being used.

How can we automate the process of selective deletion in process chain

Hi,
I got to delete data from ODS and InfoCube selectively every Tuesday. So I am aware that there is an ABAP program through which we can automate the process of selective deletion in Process chain. So plz let me know the proceedure to automate this process.

Hi,
Try this.
Need to genrate the deletion program using tcode Delete_Facts.
steps : 1 run the Delete_Facts tcode and give your cube name in the input parameter
step2 . select deletion program and execute . you will get the system genarated program
step 3 copy this prg and save as zprg.
step4 : run the program with selection
step 5. if your selection is date then you need to create dynamic varient needs to be populate the value for the date fields
step 6: you need to maintain the date values in the TVAR table if necessary
step 7. you need to use this custom prg in your process chain after completion of test
source : SDN.
Thanks,
JituK

Whilst downloading a movie, my iPhone ran out of charge. Since recharging the "processing" bar has frozen. How can I delete or complete the download?

Whilst downloading a movie, my iPhone ran out of charge. Since recharging the "processing" bar has frozen. How can I delete or complete the download?

I called Apple and spoke with a customer service representative regarding this issue. I was given the two things to try, and if they don't work, I was told I can call back in:
1. Go to iCloud.com and look at the advanced options. Since Photos can be deleted here, the representative thought there may be an option to remove songs here as well.
2. Go into the library that has the songs that were deleted and click Update iTunes match.
I tried #1--this didn't resolve the issue, as there is no option to remove songs this way. I can't try #2 right now since I'm at work, but if anybody else with this issue can try that step it can help us get the ball rolling on it. After I try that, I'll call Apple back to discuss this further.

How can i delete processing podcasts?

I've been waiting two weeks for my podcasts to finish processing.How can i delete my podcasts after they start processing?
I really need help! Thx:)

If you have another download that did not complete - Let it finish or try to delete it as well. If its a song, finish the download or the the swipe to delete feature, it its an app try tapping and holding down on it to delete it or tap on the icon to finish the download.
Eiether complete those downloads or try to delete them and then see if you can use the swipe to delete or tap and hold down on the podcast to delete them.
You can also try Settings>General>Music>Podcasts and see if you can delete them in there. Tap the edit button and see if you get the red circle to the left of the podcast.

How to copy a existing process chain

hi
i am a SAP BW learner.
i created a process chain for inital load and i want to create a process chain by copying first created process chain and tell me in what situation we delete the indexes of InfoCube.
Can any one provide me the solution to how can i copy the existing process chain and tell me in what situation we delete the indexes of InfoCube.
Thanks in Advance.

Hi Kiran:
Thats correct, you can copy an existing process chain and you will get all the variants in it.
well, the best practice to manually do the INIT loads and let the delta loads be in process chain.
we delete indexes and re create them when we are loading an infocube and the reason is performance
Assign points if helpful
kalyan

How can I delete a duplicate drive in the folders area?

Not sure how I ended up with a shared network drive duplicated under the folders area of Lightroom 3.6. Maybe it was a user error but now my network drive where I have 15,000 pictures appears twice in the folder area and it is constantly updating (since there are quite a few pictures).
How can I delete the duplicated drive? I have "removed" all the folders under the duplicated drive (and made it disappear) but the drive keeps coming back as the synchronization process will add all the folders that exist on that drive.
The two drives with "Volume_1" in the name are actually one shared network drive (I only have one).
I actually removed my network drive mapping (N:) to fix the problem but that did not even work; LR still found a duplicate name for the same network drive and started to synchronize (again). Help!!

I found pretty good super users and a solution here:
http://www.lightroomforums.net/showthread.php?14294-Remove-external-drive-from-Folders-vie w

How can I delete apps in iTunes and have that sync to my iPhone and iPad?

How can I delete apps in iTunes and have that sync to my iPhone and iPad? I don't want to delete 3 separate times for each item. I just carefully chose 30-35 apps to get rid of via iTunes, hoping it would sync to my devices, only to find I have to repeat the process on my iPad, take notes, then repeat it on my iPhone. It wasn't always so tedious was it?
Here's the "Help" I got from Apple. They even quoted my question back to me then proceeded to answer with something very different and completely missing the point.
I understand that you would like to delete the Apps. I know how eager you are to get the required information and I will be happy to assist you.
You can remove individual songs, audiobooks, and videos from your iPod, iPhone, or iPad. Removing an item from your device doesn't delete it from your iTunes library.
To remove items from a device other than an iPod shuffle, first make sure that iTunes is set up to manually manage items.
1. Connect your iPod, iPhone, or iPad to your computer.
2. When the iPod, iPhone, or iPad icon appears in iTunes, select it.
3. Unless your device is an iPod shuffle, click the Summary tab and make sure "Manually manage music and videos" or "Manually manage music" is selected.
4. If the disclosure triangle to the left of your iPod, iPhone, or iPad (below Devices) is closed, click the triangle so that you can see the device's contents.
5. Select the item you want to delete and press the Delete key.
This was not helpful in any way and I am still unable to delete apps on my devices in a global, iTunes based way. Each device still requires its own independent process.

Match was off. I made all of the changes and then went through the "Turn on iTunes Match" option. I now have deleted some tracks, edited the Metadata in CDDA, and then added it back. This worked fine, but it is not a good solution.
I just tried making some edits and use the "Update iTunes Match" and that seemed to work. It looks like the real answer is that Match must be up and operational, then you can make changes and run the Update to incorporate the changes. However, if Match has a problem then Signing Out and back in to your store account and going through the process of Turning On Match (were you get the questions, "Add this Computer to Match" will overwrite any changes.
Since this relies on the stability of iTunes, I won't be making a lot of changes between updates.

How can I delete an authorized computer from my account, but I want to still have one of the 2 I have

I made use of some computer to managed my apple account but later I sold this computer; then I bought another computer and I autorized this one but I didn't know I must delete the computer I made use before. Now I want to delete it but in the apple account page only let me to "desautorizar todo" I supose it means every computer,so how can I delete just one of them?

You can only delete individual computers if you have access to them. When you five authorizations in total you can choose to deauthorize all, then reauthorize the ones you want to use. You then can't repeat that process for a year. In short there is nothing you can do until you have five authorisations. Change your password just in case you left yourself signed in on the old one with no confirmation for purchases.
tt2

How to create document in process chain

Hi,
can u plz tell me how to create document in process chain and wat i need to edit the text for particular info package when document.

Hi Anil,
Goto Tcode:RSPC and select your load data process type where you have to right click on the process chain and select Select create message,there are three types of messages
1>Successful
2>Error
3>Always
If you already created message then go to maintain message
Where you have two buttons
1>is for Edit Document
2>Maintain Recpiants
Goto Edit Document and put your comment and set their mail address in Mail recipiants.
Note there are 2 types of messages you can kept at execution of infopackage process type.
If load is successful send the mesaage to recipients
If load is failed send the message to mail recipt.
It would help you.

Explain: how to include Infospoke in Process Chain where destination is DB

Explain: how to include Infospoke in Process Chain where destination is local machine database [NOT Flatfile]

Hi vijay,
First you create an Infospoke with destination as a DB table in your local BI or BW Machine. Now add this infospoke by going through below steps.
1. Call up the process chain maintenance. Choose This graphic is explained in the accompanying text Process Chain Maintenance from the Administrator Workbench toolbar. The Process Chain Maintenance Planning View screen appears.
2. In the left-hand screen area of the required This graphic is explained in the accompanying text display component, navigate to the process chain in which you want to insert your InfoSpoke. Double-click to select it. The system displays the process chain plan view in the right-hand side of the screen.
If no suitable process chain is available, you need to create a new process chain. You can find additional information under Creating a Process Chain.
3. To insert a process for extraction by means of an InfoSpoke, choose This graphic is explained in the accompanying text Process Types in the left-hand area of the screen. The system now displays the process categories available.
4.In the process category Loading Process and Post Processing, choose the application process type This graphic is explained in the accompanying text Data Export into External Systems.
5.Insert the Data Export into External Systems application type with Drag&Drop into the process chain. The dialog box for inserting a process variant appears.
6.In the Process Variant field, enter the name of the InfoSpoke that you want to include in the process chain, or select it by means of the input help.
Once You have added the infospoke you have to write a program which will fetch the database table that you filled and transfer the data fetched to other legacy system with the help of XI System
For more information on how to infospoke on 3rd party pls find the link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
Hope this help
Harish

How can we delete a process chain?

Similar Messages

Maybe you are looking for