How can we deprovision a user in OIM?
Hello Gurus,
What steps are needed to be taken if a user needs to be de-provisioned from already provisioned OID resource?
TIA.
If everything is set up correctly all you need to do is to revoke the OID resource.
Best regards
/Martin
Similar Messages
-
How can we deprovision and do offboard process automation in oim
hi
i would like to known how can we deprovision the user and do off board process automation..
Thanks
PoornaAccess policy. User form trigger to perform a task based on a field change.
You must define your own business process and technical requirements before trying to transform it into an OIM workflow.
-Kevin -
Can you delete a user in OIM?
How can I delete a user in OIM, such that it does not clutter my results lists with an entry marked deleted? I just want it to disappear completely!
thanksHere is how the user id can be reused, you will need to change the owner and tablespace names.
Execute the following steps in sqlplus
Step1: Drop the existing index
DROP INDEX XLAMD1.UDX_USR_LOGIN
Step2: create new Index
CREATE INDEX "XLADM1"."UDX_USR_LOGIN"
ON "XLADM1"."USR" ("USR_LOGIN")
TABLESPACE "XELTBS1" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 64K NEXT 0K MINEXTENTS 1 MAXEXTENTS
2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1)
LOGGING
Step3:
COMMIT;
Step4:
Design Console-> System Configuration
Set "User Id reuse property" to true
-Kevin -
How can I have multiple users on iTunes (in order to connect to a shared office iPad)? Currently each of us has our own iTunes account, so I've made an "all office" Apple ID. However, I can't seem to get two different accounts (my personal and the office) to work on my machine. Even when I login as "the office", my personal library is still showing. Additionally, when I try to setup with a first-time use in iTunes, I get an error that I don't meet the minimum age requirement - no matter what birthdate I enter!
The library exists regardless of which user is logged in.
The only way around that is to create different user accounts on the computer.
There is no way to have 20 unique iTunes users access a shared iTunes under a single login on the computer. -
How can I have multiple users on one apple id?
How can I have multiple users on one apple ID?
ie: I have my apple ID with my own credit, how can I set up credit for my son under the same apple ID, so that he can still access the same apps I've already downloaded and paid for?I've been trying to figure out a clean way to do this too. I think you may need more than one Apple ID – one that is shared and used to purchase "sharable" items and then "individual" Apple IDs for you and your son. That's the idea that I'm pursuing for the moment.
It seems that there must be a way to do this, App Store purchases for the Mac are licensed across multiple machines. iPhone app purchases have "all your devices" licensing. Makes me think that Apple has a process in mind for sharing an account (or associating a device with multiple accounts).
Other things I've learned:
- Apparently you can't merge Apple ID accounts. I asked about this once at an Apple Store and was told that there was no way to do it.
- If you share an Apple ID the Messages app behaves in a somewhat surprising manner. It must use your Apple ID to decide where messages should be sent because all users get all messages. This can make it very hard to organize a surprise party :-) -
How can I allow other users on my macbook to view my iphoto library when th
How can I allow other users on my macbook to view my iphoto library when they are logged in. I do not have a network, and the users (my family) all log in seperately when they use the computer. Does anyone know? Thank you.
rdoss
Welcome to the Apple Discussions.
If you want others to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account(s). In the other account(s), enable 'Look For Shared Libraries'. Your Library will appear in their source pane.
Remember iPhoto must be running in both accounts for this to work.
Regards
TD -
I have 2 user id's with apple, i bought 26 songs from my laptop recently using my work e-mail. I plug my i-pod to sync it and it says that my i-pod is tuned with another library. i don't want to erase the songs I have already because they are about 760 and the new ones are 26 only. how can I combine both user id's and consolidate all the music into one user id?
everytime i try to do something it asks me to reset the password. I have done it already 6 times.
there is no phone # to call.
Thanks
ElenaAlright, please follow these steps in order to get it working properly again.
Please change your Apple ID back to your old email address (that you used as Apple ID before) here: http://appleid.apple.com
Then go to all your devices - iPhones, iPads, Mac etc. - ("Settings > iCloud") and delete your iCloud account from this devices (+ turn off Find My iPhone, but I guess it will ask you that anyway)
After that go back to http://appleid.apple.com sign in again, and now change your Apple ID again to your new email address.
Finally, set up your iCloud account on all your devices again.
Now, everything should working properly again. -
How can I change the USER name of my i-cloud e-mail account? It was set up by my son and he used a silly / embarrassing user name. I would like to change this name OR set up another i-cloud e-mail account under my own name / reference. Help?
iCloud email addresses can't be changed or deleted, but you can set up an alias namethat he can use which will be linked to his current iCloud account and will receive email in the existing iCould inbox. This guide explains how: http://support.apple.com/kb/PH2622.
-
How can I transfer two user names from an iMac to a new macbook?
How can I transfer two user names from an iMac to a new macbook?
got a new laptop and need to transfer two usernames to it, complete with all documents help?Assuming you haven't already set up a user, the easiest way is to use the Setup Assistant during first boot of the new Mac, with the two Macs connected by firewire.
You'll be prompted to migrate from a choice of sources - choose "from another Mac", select the catagories of data you want to transfer and follow the instructions.
More info here, in Pondini's FAQ; http://pondini.org/OSX/SetupAsst.html -
How can I restrain the user login portal once, in the same time ???
Hi
I need to restrain the user can't repeat to login portal ....
to reduce portal loading
How can I restrain the user login portal once, in the same time???
Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
tksDoes your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
- Jim -
how can i get my user manual info back onto my settings menu
this heading did not appear on the settings menu following a restore necessitated bt a freezing screen glitch thanksI'm not entirely sure what you are referring to, there isn't a user manual section in the iPad's Settings app. If you want an iPad then you can either download it from here : http://support.apple.com/manuals/ipad/
Or if you download the iBooks app then there should be a copy in the ibookstore in it -
How can I change an user username
Hi,
Please anyone tell me how can I change an user username. I need to do that because I have a .dmp with the same username as the one I already have in my database and I need to use the both.
Thank youYou can just create your new user as required, then do an import with the parameters
fromuser=olduser touser=newuser
plus whatever other parameters you require.
TTFN
John -
How can i obtain a user guide for the ipod nano 16GB 5th gen. without printing it off the computor.
You can't, at least not the one provided by Apple.
B-rock -
How can I allow a user (client) to choose a local image file (on his hard d
How can I allow a user (client) to choose a local image file (on his hard drive) and modify it using an applet from his browser ? I am trying to develop a web page that enables the user to choose an Image file, manipulate the image using a java applet, and display the results.
Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. On the other hand, I can choose and upload any file using a JavaScript form:
<FORM METHOD="POST" ENCTYPE="multipart/form-data" ACTION="process.asp">
<INPUT TYPE=FILE NAME="file1"><BR>
�
It seems that I can choose an image file with a Java script form and process an image with an applet. How can I choose a file AND process it locally ?
(I do not wish to upload the file to the server using JavaScript form and then back to the client�s applet for processing since it will be a tremendous waste of resources).
Will appreciate any solution.
Thanks !
( my email is: [email protected] )"Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. "
You can do this if you sign the applet... -
How can I find out user id who has deleted payment order
Issue : After payment run, the required information has been sent as Idoc to the bank. So, we know the payment order number. We observed that another payment run also has picked up this vendor invoice and made payment.
Usually Payment Sent will be marked X until the related information comes in the form of bank statement upload and this amount gets cleared.
We noticed that bank has made two payments for this amount to this vendor on different dates :- a) when the payment order supposed to be paid as per the payment terms and b) when second paymnet run paid the amount [ this time it got paid directly as there is long due amount ].
From SAP APP angle, both the payment run worked fine and also the calcaltion of payment terms as well.
So, we come to conculsion that someone has deleted the payment order from the system. Thats the reason this invoice got picked up by 2nd APP and paid the amount.
Where we could not find the related entry in REGUH/REGUP tables for this payment order and no document changes.
Question: How can I find out user id who has deleted payment order. Appreciate any clue / answer for this issue please.
Thank you
SriHello,
Not sure about deletion logs. =/
Idea:
What if an error occured during the first payment? Have you checked sm13 to check if any update termination occured in the payment program?
Regards,
Renan
Maybe you are looking for
-
Advance payment - TDS deducted but cheque printed for full amount
Hello SAPians, Advance payment to vendor - TDS is applicable - SAP entry shows about TDS Deduction but the cheque printed for full amount. Cheque needs to be printed after TDS deduction. Please suggest. JK
-
Sound blaster live 24 bit ac3 passthro
I can not find a way to select ac3 passthrough. I need this so when I play dvds,my surround sound receiver will decode the ac3 instead of my sound card. One would think that creative would been a little more creative & made this a little easier. Can
-
Problem declaring and using a REF CURSOR
I'm having a real problem using a REF CURSOR type Here's the DECLARE and the start of the BEGIN I've so far developed. DECLARE TYPE r1 IS RECORD ( szvcapc_pidm szvcapc.szvcapc_pidm%TYPE, szvcapc_term_code szvcapc.szvcapc_term_code%TYPE, szvcapc_reque
-
Error 50103 the specified resource is reserved - task name - on 4 modules
Hi all. I'm sorry i put this post by mistake in Measurement Studio for.NET: smileyindifferent: Let me tell you my configuration: software: Windows XP sp3, Labview 8.5 en. hardware: NI-cDAQ chassis 9172 with 4 modules installed (in this order):
-
Work Flow with FCP and color correction
I am looking for a decent workflow between FCP and motion when I need to apply color correction to the clips. I have a goup of clips in FCP that I would like to send to motion, animate them and send them back to FCP. Problem is I want to use FCP for