How can we do Custom Text Analysis in SAP cloud platform(trail)

Hi all,
I am try to create a full text index with custom data but i am not able to create cofig  file because i have  access of only trail version of hana cloud.
is there any way to do so in hana cloud.
Regards
GB

Hi Gita,
It is possible to read the BLOB data using MII.
See the following thread. Its not exact case as yours, but might be useful.
Retrieving BLOB data using MII | SCN
Hope it helps,
Regards,
Rutika Bodas
Correction:
Gita,
I investigated more on this and tried to create a query that fetches data from my BLOB type of column. Guess what, it FAILED. 
On running the query, it gave an exception stating that 'BLOB" type of data cannot be fetched as Java type 'String'.
Perhaps, there is no straightforward way to read the BLOB data from a query in MII. Not sure if there's some other way.
Regards,
Rutika
Message was edited by: Rutika Bodas

Similar Messages

  • How Can I replace newScale Text Strings with Custom Values?

    How Can I replace newScale Text Strings with Custom Values?
    How can I replace newScale text strings with custom values?
    All  newScale text is customizable. Follow the procedure below to change the  value of any text string that appears in RequestCenter online pages.
    Procedure
    1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
    a) Navigate to the RequestCenter.ear/config directory.
    b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
    c) Save the file.
    d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
    e) Stop and restart the RequestCenter service.
    f) Log  in to RequestCenter and browse to the page that has the text you want  to overwrite. In front of the text you will now see the String ID.
    g) Note down the String ID's you want to change.
    2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
    3. Create the following sub-directory: res/resources
    4. Create the following empty text files in the directory you just created:
    RequestCenter_0.properties
    RequestCenter_1.properties
    RequestCenter_2.properties
    RequestCenter_3.properties
    RequestCenter_4.properties
    RequestCenter_5.properties
    RequestCenter_6.properties
    RequestCenter_7.properties
    5. Add the custom text strings to the appropriate  RequestCenter_<Number>.properties file in the following manner  (name-value pair) StringID=YourCustomTextString
    Example: The StringID for "Available Work" in ServiceManager is 699.
    If you wanted to change "Available Work" to "General Inbox", you  would add the following line to the RequestCenter_0.properties file
         699=General Inbox
    Strings are divided into the following files, based on their numeric ID:
    Strings are divided into the following files, based on their numeric ID:
    String ID  File Name
    0 to 999 -> RequestCenter_0.properties
    1000 to 1999 -> RequestCenter_1.properties
    2000 to 2999 -> RequestCenter_2.properties
    3000 to 3999 -> RequestCenter_3.properties
    4000 to 4999 -> RequestCenter_4.properties
    5000 to 5999 -> RequestCenter_5.properties
    6000 to 6999 -> RequestCenter_6.properties
    7000 to 7999 -> RequestCenter_7.properties
    6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
    7. Restart RequestCenter.
    Your customized text should be displayed.

    I've recently come across this information and it was very helpful in changing some of the inline text.
    However, one place that seemed out of reach with this method was the three main buttons on an "Order" page.  Specifically the "Add & Review Order" button was confusing some of our users.
    Through the use of JavaScript we were able to modify the label of this button.  We placed JS in the footer.html file that changes the value of the butt

  • How can we define custom error page in protal application

    How can we define custom error page in protal application, like we define "jsp Error page " in JSPs

    Hi,
    Check these:
    Customization of Portal Runtime Errors and portal standard error codes
    http://help.sap.com/saphelp_nw04/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ec/1273b2c413b2449e554eb7b910bce7/frameset.htm
    Regards,
    Praveen Gudapati

  • How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

    How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear.  You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location.  THANK YOU!!!!!!

    Have you tried Word for Mac?
    You will need to test if links survive export or printing to .pdf
    Peter

  • How can I get the "text" field from the actionEvent.getSource() ?

    I have some sample code:
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import java.util.ArrayList;
    public class JFrameTester{
         public static void main( String[] args ) {
              JFrame f = new JFrame("JFrame");
              f.setSize( 500, 500 );
              ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
              buttonsArr.add( new JButton( "first" ) );
              buttonsArr.add( new JButton( "second" ) );
              buttonsArr.add( new JButton( "third" ) );
              MyListener myListener = new MyListener();
              ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
              ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
              ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
              JPanel panel = new JPanel();
              panel.add( buttonsArr.get( 0 ) );
              panel.add( buttonsArr.get( 1 ) );
              panel.add( buttonsArr.get( 2 ) );
              f.getContentPane().add( BorderLayout.CENTER, panel );
              f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
              f.setVisible( true );
         public static class MyListener  implements ActionListener{
              public MyListener() {}
              public void actionPerformed( ActionEvent e ) {
                   System.out.println( "hi!! " + e.getSource() );
                   // I need to know a title of the button (which was clicked)...
    }The output of the code is something like this:
    hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
    border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
    flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
    disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
    right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
    rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
    I need this: "first" (from this part: "text=first" of the output above).
    Does anyone know how can I get the "text" field from the e.getSource() ?

    System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
    In a real-world application, no.
    In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
    In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
    All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
    Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

  • My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

    My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

    Just an email address
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

  • How can we use Custom MessageBox in SelectionChangedEvent of LongListSelector for Windows Phone 8

    Dear Sir/Madam,
    How can we use Custom MessageBox in SelectionChangedEvent of LongListSelector for Windows Phone 8.
    Actually my problem is that When i am using Custom  MessageBox in SelectionChangedEvent of LongListSelector,when i am click Open(Left Button) it's working fine and navigated correctly,But when i am Click the No(Right Button) then it stayed in same page
    but all that page is in stuckup i mean that page is not working and not doing any event.
    My C#.net Code
    private async void userPageLongListSelector_SelectionChanged(object sender, SelectionChangedEventArgs e)
    if (e.AddedItems.Count > 0)
    if (userPageLongListSelector.SelectedItem == null)
    return;
    if (dbTenMin == null)
    dbTenMin = new Database(ApplicationData.Current.LocalFolder, "tenMInDBSchema.db");
    await dbTenMin.OpenAsync();
    var res = (sender as LongListSelector).SelectedItem as _10Min._10MinClass.minUserPages;
    var resIndex = (sender as LongListSelector).ItemsSource.IndexOf(userPageLongListSelector.SelectedItem);
    string selectedPageName = res.userPages.ToString();
    string selectedPageDesignUser = res.pageDesignUser.ToString();
    int selectedIndex = resIndex;
    CustomMessageBox messageBox = new CustomMessageBox()
    Caption = "Message...!",
    Message = "This form need offline datalist,Please load now.",
    LeftButtonContent = "Open",
    RightButtonContent = "No"
    messageBox.Dismissed += (s1, e1) =>
    switch (e1.Result)
    case CustomMessageBoxResult.LeftButton:
    string uidAndpwd = _10MinClass._10MinStaticClass.csUidAndPwd.ToString();
    _10MinClass._10MinStaticClass.csDataListPageDetails = selectedPageDataDetailsForSchema.ToString();
    _10MinClass._10MinStaticClass.csAllDataLists = offlineDataBaseDataListNam;
    _10MinClass._10MinStaticClass.csNotCreatedSchemaNameOfDBList = notCreatedDataLists;
    userPageLongListSelector.SelectedItem = null;
    if (dbTenMin != null)
    dbTenMin.Dispose();
    dbTenMin = null;
    NavigationService.Navigate(new Uri("/10MinformDataList.xaml", UriKind.Relative));
    else
    NavigationService.Navigate(new Uri("/10MinformDataList.xaml", UriKind.Relative));
    break;
    case CustomMessageBoxResult.RightButton:
    break;
    case CustomMessageBoxResult.None:
    break;
    default:
    break;
    messageBox.Show();
    Same custom messagebox code working in Phone_BackKeyPress event i am writing the code in Right Button that e.OriginalSource.ToString(); then it is working fine.
    But It is not working in Selection Changed Event in LongListSelector control in Windows Phone 8.
    Please help me,as soon as possible.
    Thanks & Regards,
    SrinivaaS.

    What happens if you leave the implementation for LeftButton empty as well , does the page gets stuck in that case also, if you press left button?
    i.e.
    CustomMessageBox messageBox = new CustomMessageBox()
    Caption = "Message...!",
    Message = "This form need offline datalist,Please load now.",
    LeftButtonContent = "Open",
    RightButtonContent = "No"
    messageBox.Dismissed += (s1, e1) =>
    switch (e1.Result)
    case CustomMessageBoxResult.LeftButton:
    break;
    case CustomMessageBoxResult.RightButton:
    break;
    case CustomMessageBoxResult.None:
    break;
    default:
    break;
    messageBox.Show();
    http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

  • How can I prevent my texts showing on another family members iPhone?

    How can I prevent my texts showing on another family members iPhone?

    Stop using the same apple ID for iMessage on both phones.
    Your question has already been asked and answered many many times. Search before posting please.

  • How can I program the text fields in my email forum to have rounded corners

    How can I program the text fields in my email forum to have rounded off edges or corners. 
    this is the code im using.
    // insert code here// insert code here// prepare email field
    var email = sym.$("email")
    email.html("Enter your Email: ");
    inputEmail = $('<input />').attr({'type':'text', 'value':'', 'id':'email'});
    inputEmail .css ('font-size', 14);
    inputEmail .css ('width', 350);
    inputEmail .css ('background-color', '#4e4e4e');
    inputEmail .appendTo(email);
    // prepare topic field
    var topic = sym.$("topic");
    topic.html("Topic: ");
    inputTopic = $('<input />').attr({'type':'text', 'value':'', 'id':'topic'});
    inputTopic .css ('font-size', 14);
    inputTopic .css ('width', 350);
    inputTopic .css ('background-color', '#4e4e4e');
    inputTopic .appendTo(topic);
    // prepare message field
    var message = sym.$("message");
    message.html("Message: ");
    inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});
    inputMessage .css ('font-family',"Arial,Helvtica,sans-serif");
    inputMessage .css ('color',"#ffffff");
    inputMessage .css ('font-size', 14);
    inputMessage .css ('background-color', '#4e4e4e');
    inputMessage .css ('box-shadow', '#4e4e4e');
    inputMessage .css ('width', 350);
    inputMessage .css ('height', 150);
    inputMessage .appendTo(message);
    var submitBtn = sym.$("btn");
    submitBtn.html("Submit");
    submitBtn.css("text-align", "center");
    submitBtn.css("font-size",14);
    submitBtn.css("font-weight","bold");
    submitBtn.css("color","#ffffff");

    Try this: inputEmail.css ('border-radius', '25px');
    attachment
    more details

  • How can i remove JUNK TEXT from APEX

    Hi ,
    In our project Apex has integrated with oracle apps,every time we will open apex front end from oracle application(EBS).so we have two kinds of instances 1) development and other is production
    every time we export the apex application from developement instance and import in production instance . after imported into production * we got JUNK TEXT like "TEXT:TEXT" in apex front end* so how can i remove JUNK TEXT from APEX
    Apex 4.0.0.00.46 version
    please somebody help on this issue
    Help would be appreciated
    Regards
    Narender B

    Hi,
    It is not clear what you are seeing here. Also we don't know how you have integrated Apex with EBS. My guess is you have linked an Apex page to the EBS menu and when you click on the menu link you see the additional text on the Apex page.
    You need to give details of how you have integrated Apex with EBS and where and when this additional text is being displayed for me to give you any help on this issue.
    Rod West

  • How can I create a Text-Input Field in BexAnalyzer for a Planning Function

    Hello,
    i want to create a pre calculation(contribution accounting) for Materials in BI-Integrated Planning. These Materials aren't in the master data. So I create a new Info Object for pre calculated materials with only a material-number as key and a text-description.
    Now I want to write a Exit-Function, which creates new materials in these Info Object. The user should start this function in a planning application in BexAnalyzer. There the user should have the possibility to enter a text-description for the new material. How can I create such a Text-Field in BexAnalyzer and how can I read this text filed in a planning function (exit).
    Thanks in advance

    Hi Jürgen,
    you can create a parameter for this in the exit function and a variable for the parameter. In BEx Analyzer then create a button for the planning function; in the button parameterization use VAR_NAME = , i.e. use an Excel formula here to get the value from an Excel input field.
    The command range should be some 'hidden area' in your Excel sheet.
    But may be you don't need this. Use a characteristic without master data. Then ensure that that the query uses the option 'key' as display. In new lines you can then enter the key, the system creates a SID on the fly (but the text table will not be updated). In this scenario you may take text also from the key. May be you can update the text table (online or in batch) by simply using function modules from function group RSNDI_MD (not released by SAP).
    But observere that the system in BI Planning reads only the active version, i.e. if you change something on the fly the changes may not be visible.
    Regards,
    Gregor

  • How can I make the text bigger in iCal?

    How can I make the text bigger in iCal?  I've looked at Preferences and View. 

    Sorry, did not see that you are using 10.6.7

  • How can I print a text message conversation from my iPhone? Not using screenshots.

    How can I print a text message conversation from my iPhone? Not using screenshots. It's around 500 messages so screenshots is not a option.

    Yes, you can delete from iphone:
    http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
    It is covered in the manual.
    Page 172:
    "Delete a podcast: In the Podcasts list in iPod, swipe left or right over the podcast, then
    tap Delete. "

  • How can I send a text with a picture attachment on my new iPhone5c?

    How can I send a text with a picture attachment on my new iPhone5c? It won't send or recieve!!.

    Does your carrier support it?
    Follow the steps in this guide.
    http://www.imore.com/how-send-photo-using-imessage

  • How can i add custom attributes to a new Class Object using the API ?

    Hello everyone,
    Here is my problem. I just created a subclass of Document using the API (not XML), by creating a ClassObjectDefinition and a ClassObject. Here is the code :
    // doc is an instance of Document
    ClassObject co = doc.getClassObject();
    ClassObjectDefinition cod = new ClassObjectDefinition(ifsSession);
    cod.setSuperclass(co);
    cod.setSuperclassName(co.getName());
    cod.setName("MYDocument");
    ClassObject c = (ClassObject)ifsSession.createSchemaObject(cod);
    Everything seems to be OK since i can see the new class when i use ifsmgr. But my question is : how can i add custom attributes to this new class ? Here is what i tried :
    AttributeDefinition value = new AttributeDefinition(ifsSession);
    value.setAttribute("FOO", AttributeValue.newAttributeValue("bar"));
    c.addAttribute(value);
    But i got the following error message :
    oracle.ifs.common.IfsException: IFS-30002: Unable to create new LibraryObject
    java.sql.SQLException: ORA-01400: impossible d'insirer NULL dans ("IFSSYS"."ODM_ATTRIBUTE"."DATATYPE")
    oracle.ifs.server.S_LibraryObjectData oracle.ifs.beans.LibrarySession.DMNewSchemaObject(oracle.ifs.server.S_LibraryObjectDefinition)
    oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.NewSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
    oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.createSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
    void fr.sword.ifs.GestionDocument.IFSDocument.createDocument(java.lang.String)
    void fr.sword.ifs.GestionDocument.IFSDocument.main(java.lang.String[])
    So, what am i doing wrong ?
    More generally, are we restricted in the types of the attributes ? (for example, would it be possible to add an attribute that would be an inputStream ? Or an object that i have already created ?).
    Any help would be appreciated. Thanks in advance.
    Guillaume
    PS : i'm using Oracle iFS 1.1.9 on NT4 SP6 and Oracle 8.1.7
    null

    Hi Guillaume,
    you're welcome. Don't know exactly, but assume that ATTRIBUTEDATATYPE_UNKNOWN
    is used to check for erronous cases only
    and it shouldn't be used otherwise.
    Creating your own objects could be simply done via
    ClassObject ifsClassObject;
    DocumentDefinition ifsDocDef = new DocumentDefinition(ifsSession);
    // get class object for my very own document
    ifsClassObject = ClassObject.getClassObjectFromLabel(ifsSession, "MYDOCUMENT");
    // set the class for the document i'd like to create
    ifsDocDef.setClassObject(ifsClassObject);
    // set attributes and content for the document...
    ifsDocDef.setAttribute("MYFOO_ATTRIBUTE",....);
    ifsDocDef.setContent("This is the content of my document");
    // create the document...
    PublicObject doc = ifsSession.createPublicObject(ifsDocDef);
    null

Maybe you are looking for

  • Will 'Erase All Content and Settings' remove Apple ID from my iPad 2?

    Hi all. I've read that Erase All brings the iPad back to how it was when it left the shop. But I need to comfirm something 'cos here's the situation: 1. I just sold my mum's iPad to a third party shop. All done, or so I thought. 2. I get a text askin

  • Suspend to ram/disk stopped working overnight

    My suspend to ram/disk used to work fine, but overnight, it stopped. It is not an update issue since, I was able to suspend after the last update. I decided to update today hoping that it is going to solve the problem, but the problem persist. Here i

  • Using Mail, sender and receiver addresses getting mixed.

         I'm using the mail app for my company gmail account (@companyname.com) we have them set up for the whole office. Well what appear to be normal when I write an email and sent it to the desired person, it will later say on their screen or mine tha

  • Outbound EDI missing envelope segment

    Outbound EDI file is missing envelope segment (ISA,GS,GE AND IEA). Input xml is getting processed successfully. However, the outbound EDI is missing the envelope segment. My vendor says he needs envelope segement. What am I doing wrong? Thanks for yo

  • Cisco Call Manager 8.5 and Lync 2013

    Dear all, Our customer wants to integrate their Lync 2013 to the Cisco Call Manager 8.5. Out of some not so recent information i thought that if u want to use the enterprise voice of lync you'll have to make a sip trunk between Cisco Call Manager & L