How can we enable the trace at schema / user level

Hi ,
I knew how to enable the trace at session level and system level.
How can we enable trace at schema / user level.
Thanks
Naveen

I still don't understand.
As far as I know, 'trace' means 'to emit information about a subset of the steps being taken through code, generally to profile timing or identify code paths'.
As far as I know, a user and a schema are passive. There is absolutely no code 'running' against a user or a schema. I have no idea what could be 'traced' for a user or schema that is not already available in the data dictionary.
Further, a schema is nothing other than a named set of database objects. The name happens to be tied to a specific userid. So a schema could be considered a special kind of userid - although that is technically incorrect.
A session, on the other hand, is active. There is code running, there is memory assigned. It happens to link to the connection established by a user, using a specific userid.
I think you have told us you know how to turn on tracing for a session.
Why can you not turn on the traciong for all the sessions for a userid?

Similar Messages

How can i enable the trace for OpenDocument URL

When i trying to view the document through OpenDocument URL getting an error message "An error occured. Error occured while trying to view the document". But when i verified throguh infoview/cmc able to view the report with out any error for the same user.
I verified access level and the user have required access rights "view access, View Objects" etc..
I enabled the trace for the servers "Crystal Processing Server, Crystal Cache Server, CMS server, Report Application Server", but i didn't see any useful information.
I'm facing the issue with Crystal Reports and didn't try with WEBI reports.
Is there any way to debug the issue and any path to enable the trace

Hi RVS,
I integrated BO to my application. When i tried to open the instance through my app using OpenDocument URL, it asking the login credentials (generally it should not). Once if i provide the credentials navigating to the error page.
I'm using the BOXI 3.1 with SP6.
Below are the url's captured when i tried to see the instance
http://myserver.com:8080//PlatformServices/service/app/logon.do?appKind=InfoView&service=%2FOpenDocument%2FappService.do&backContext=%2FOpenDocument&backUrl=%2Fopendoc%2FopenDocument.jsp%3FbackContext%3D%252FCrystalReports%26SERVICE%3D%252FOpenDocument%252FappService.do%26backUrl%3D%252Fview.do%26service%3Dtimeout&backUrlParents=1&appName=Open+Document&prodName=Business+Objects+Enterprise&cmsVisible=false&cms=myserver%3A6400&authenticationVisible=false&authType=secEnterprise&sso=false&sm=true&smAuth=secLDAP&sapSSOPrimary=false&persistCookies=true&sessionCookie=true&useLogonToken=true
http://myserver.com:8080//OpenDocument/appService.do?service=skinning&resource=stylesheet
Thanks,
Pradeep.

How can i get the trace file

Hi,
I wanted to check the trace file to make sure that there is no login attempts happend through the forms with wrong username and password.
how can i enable the trace file , where i have to write the commands and where i can see the trace file.
I'm using oracle forms 6i
could anybody help me.
thanks
Bcj

This link is all about forms 9i, i'm working on forms 6i. but i have tried with following values
TRACE_LEVEL_CLIENT=16
TRACE_UNIQUE_CLIENT=TRUE
TRACE_FILE_CLIENT=Test
TRACE_DIRECTORY_CLIENT=c:\orant\net80\trace
in sqlnet.ora file and it created a trace file whenever it connected to database through the on_logon trigger.
if the username or password is invalid then the validations raise the form_trigger_failure exception. so there was no trace file. so i was unable to get the trace file to see the invalid login attempts.
Thanks

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

How do you disabled it if running the same?

How can I enable the Dashboards in the UCM 10G ?

Hi to all, How can I enable the Dashboards in the UCM 10G ?

There was a component (I can't remember its name) that added a dashboard. Note that it was not a supported component, so you had to take it as it is, or create your own.

How can I read the trace data into LabVIEW for E5071B

HI
I am setting up the measurement using vector network analyzer (VNA) E5071B controlled by NI 488.2. How can I read the trace data into LabVIEW and display on the graph? If anyone having an idea or know well about this process please give me the suggestion, I will much appreciate it.
Many Thanks

You want to start with the driver
In case you do not know it, you can do the driver search in LabVIEW from Tools>Instrumentation>Find Instrument Drivers. You might also want to bookmark the Instrument Driver Network for information on what a driver is and how to use it.

How can I enable the Special Stock Indicator in the source list?

Hello Gurus,
How can I enable the Special Stock Indicator in the source list? This can be found in the Maintain source list detail screen, source group and beside the order unit. Even I am in the create or in change mode, still the indicator can't change
Thanks!

OSS note 668764 explains that the special stock indicator field is a display only field and cannot be changed in the source list. it is only taken over from a scheduling agreement.

How can I enable the chinese subtilte in the rented movie with Chinese subtitle.

How can I enable the chinese subtitle in the rented movie with Chinese subtitle. Like "50 First Dates" in Hongkong Store.

You can do it with a trackpad but I am not sure about the mouse. Take a look at his link, http://support.apple.com/kb/HT4288

How can I enable the 2d dock in Mavericks?

How can I enable the 2d dock in Mavericks?

Take a look at my youtube video. I found a solution for it.
http://www.youtube.com/watch?v=TGBe_yeX4FM
Let me know later on!

How can I turn the trace on to trace a problems

I had changed some parameters for archiving log like log_archive_start to true and log format as well
ORA-32006 : this msg occur after while
now how can I turn the tracer on to check the details in Oracle server
please comment to me

Hi,
You've modified a deprecated parameter ...
ORA-32006: %s initialization parameter has been deprecated
Cause: A deprecated parameter was specified at startup
Action: Consult Oracle documentation to find new parameters to use instead.
Are you using a pfile or spfile?
Cheers
Legatti

How can I enable the automated drop down for the subject line on the email page

How can I enable the automated drop down for the subject line on the email page as I send more than 300 emails everyday with the same subject line. Before it use to happen in my gmail account but now its not. Please help me as its increasing my work time because I have to type the subject line again and again on each email I send. Please help me guys.

This is usually caused by one or more bookmarks having a long title.
You can check that folder in the Library and shorten long names.
* Bookmarks > Show Al Bookmarks
*Bug 626066 - History, Bookmarks menus too wide because of pages with long titles on 64bits
<i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

How can i enable the airport extreme that is built-in on my mac mini model 2010

I need some help in how can I enable the airport extreme that is built-in my mac mini 2010 model ? I tried and download the airport extreme 802.11n enabler for mac and it tells me Your computer does not meet the hardware requirements for this update. please help me

Wireless is already enabled. Just turn it on using the Finder's menubar icon or using Network preferences.

How can I enable the ability to create links when editing site text in BC?

I am about to launch my first BC site for a client. I built the site using Muse. The client needs to update text and pics on their own using BC, which is fine, but when editing text, they are unable to create a link to another page. How can I enable the ability to create links when editing site text in BC? I can apparently do this in this post, but I don't see a way to do this for their site.

Grid control should be used if you have multiple dbs to manage.
But if you still want to install dbconsole, you can use dbca as already mentioned. it's much easier to do that using dbca.
With the manual method, you create the repository via emca -repos create.
Then you configure it using emca -config dbcontrol db. This will ask for sys passwords, ports setting etc...

How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

Ok what about If i need to get all important attributes by comparing Email addresses from excel file and get all required answers
currently I am trying to verify how many users Lines are missing , Emp numbers , Phones from AD with HR list available to me.
I am trying to Scan all the AD matching HR Excel sheet and want to search quickly how many accounts are active , Line Managers names , Phone numbers , locations , title , AD ID .
these are fields I am interested to get in output file after scanning Excel file and geting reply from AD in another Excel or CSV file
Name’tAccountName’tDescri ption’tEma I IAddress’tLastLogonoate’tManager’tTitle’tDepartmenttComp
any’twhenCreatedtAcctEnabled’tGroups
Name,SamAccountName,Description,EmailAddress,LastLogonDate,Manager,Title,Department,Company,whenCreated,Enabled,MemberOf | Sort-Object -Property Name
Can you modify this script to help me out :)
Hi,
Depending on what attributes you want.
Import-Module ActiveDirectory
#From a txt file
$USERS = Get-Content C:\Temp\USER-LIST.txt
$USERS|Foreach{Get-ADUser $_ -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
#or from a csv file
$USERS = Import-CSV C:\Temp\USER-LIST.csv
$USERS|Foreach{Get-ADUser $_.SAMAccountName -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
Regards,
Dear
Gautam Ji<abbr class="affil"></abbr>
Thanks for replying I tried both but it did not work for me instead this command which i extended generated nice results
Get-ADUser -Filter * -Property * | Select-Object Name,Created,createTimeStamp,DistinguishedName,DisplayName,
EmployeeID,EmployeeNumber,Enabled,HomeDirectory,LastBadPasswordAttempt,LastLogonDate,LogonWorkstations,City,Manager,MemberOf,MobilePhone,PasswordLastSet,BadLogonCount,pwdLastSet,SamAccountName,UserPrincipalName,whenCreated,whenChanged
| Export-CSV Allusers.csv -NoTypeInformation -Encoding UTF8
only one problem is that Manager column is generating this outcome rather showing exact name of the line Manager .
CN=Mr XYZ ,OU=Users,OU=IT,OU=Departments,OU=Company ,DC=organization,DC=com,DC=tk

How can we enable the trace at schema / user level

Similar Messages

Maybe you are looking for