How can we execute an *.exe that is present on the client side from Server.

Hi
My application users would be having their own exe's installed on their machines. Using a wizard thay would be providing the path where the executable would reside on their machine and this information will be store in our data base. So how can we provide the user the capability of executing the exe from my application that is a server based.
Thank you in advance.

basically... drop the requirement as it is simply impossible. Whatever the executable is doing, perhaps you can mimic it in an applet, javafx, flash, silverlight, flex or whatever similar platform you want to use. Doing anything to or with that which resides on the client side is off limits to you and with very good reasons. Just think about the horrible things you could do to a computer if you had access to it through a simple webpage!

Similar Messages

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

If you want to see what is in a file that is backed up by time machine then you have to restore the entire file. Having said that I have had good experience with Time Machine and individual files... if the file is there then all of it's components are almost for sure there. A way to get around this in Aperture would be to use referenced images. The images then still exist as individual files and can be backed up and restored individually. You would have to do so on a file by file basis though and your album information would still only be saved within the Aperture library.

How can I launch a site that I designed for a client using their MobileMe account? Can they 'open' my iWeb files on their iWeb software?

How can I launch a site that I designed for a client using their MobileMe account? Can they 'open' my iWeb files on their iWeb software?

If you give them the Domain.sites2 file that iWeb used to create the site they will be able to open it with iWeb application (it has to be the same version as you have) and make changes. But if you're expected to also make changes you'll need a way to send that file back and forth between the two.
Also there's an online MacWorld article that describes a way that both of you could manage the site using Dropbox. Look at Managing an iWeb site from multiple Macs.
OT

On CS5, how can I recover jpeg images that were Batch Renamed prior to removal from my flashcard?

On CS5, how can you recover JPEG images that were accidentally Batch Renamed prior to removal from a flash card? Is it a total lose or can they be saved somehow?

If they were renamed on the flash card that is a poor practice. If renamed in Bridge the old names can be recovered it you have checked "preserve original name in XMP". If not you are out of luck. But you still have the images correct?

How can I use charsets.jar without installing it in the client JRE?

Hi! I've an applet that needs to do some CP850. Since many of the clients are from english speaking countries, they do not have the appropriate JAR that supports the CP850 encoding. Now, I have the charsets.jar which has this encoding. If I install it in the client jre/lib/ext folder, my applet works perfectly, but I don't want to do that. Instead, I want the applet to read it from its own jar or, including the charsets.jar in the archive parameter. I have tried both, adding the whole of charsets.jar to my applet jar using jar -xc dependences\charsets.jar, and also, by putting it in the archive parameter of the applet. None of them works, and I don't know why. If someone can tell me why it didn't work, and how can I make it to work, I'll be very thankfull.
I've been trying also to use a URLClassLoader, but here I got access exceptions:
URL urlCharsets = new URL("http://url.com/jars/charsets.jar");
URL[] urls = {urlCharsets };
URLClassLoader classloader = new URLClassLoader(urls);
classloader.loadClass("sun.io.ByteToCharCp850");Security Access exception here... and the charsets.jar that I'm loading IS signed. No idea what to do here.
Best regards and happy new year!
Message was edited by:
obirenokenobi

Hi,
Assuming your applet jar and the charset jar are ine the same location on your
server, I'll suggest to use this:
<applet code="myapplet/myapplet.class" archive="myapplet.jar,charset.jar" height="400" width="550"></applet>Hope that help,
Jack

How to Print Crystal Report without any dialog message on the client side

Hi!
I've read too much questions like this, but i can't find any answer.
How can i print a report on the client side directly?
I have three buttons, "Generate Report", "Generate PDF", "Print".
I want when the "Print" button was clicked, automaticaly the report is printed using default printer, like PrintToPrinter function, but in the client side.
Thanks!

If you search for previous posts about this, you will see many posts saying not possible. If this functionality was possible, you could essentially have a page that would send something to a clients printer just by visiting the page, how bad of security hole would that be?

How can i remove a name that comes up as the Home user next to the House symbol?

For some reason when the House symbol appears in any incidence on my Mac Pro lap top although it is only me that has ever used it it shows the name Sharon next to the house which isn't mine! I can only presume it has been imported across with other stuff from my old lap top which previously belonged to a Sharon! Does any one know how to change this please? Thanks

Hi BillieBo,
To delete a user folder from your MacBook Pro, follow the directions in this article -
OS X Yosemite: Delete a user
Thanks for using Apple Support Communities.
Best,
Brett L

How can you tell which computer that is authorized as the master?

I have several computers that I have connected my iPhone to. How can I tell which computer I should connect to before updating the operating system? I don't want to loss data if I don't have to.

I am not that familiar with Apple and iTunes and was getting help from someone who said that I can plug my iPhone into my computers but that I would have to authorize the iPhone on each but the limit is 5.
This is not accurate.
You can authorize up to 5 computers with the same iTunes account. There is no device limit for the number of iPods, iPads, and iPhones that can be synced with the same iTunes library and iTunes account on the same computer.
An iPhone can be synced with an iTunes library on one computer only, and photos can be transferred from one computer only. When transferring iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first.
This is why I asked - you have connected your iPhone to each one of these computers for what?
I was not sure which computer I first used. Is there a simple way to check?
No, or I would have provided that with my first reply.
If you connect your iPhone to a "non-master" computer to install the update, you will be provided a warning.
How many computers are you talking about? If 5 or less, this should take you no more than 10 minutes to determine which computer you transferred music and photos from.

How can I make Firefox recognise that I have changed the DNS servers to use?

After I edit /etc/resolv.conf to make my computer use more reliable DNS servers, Firefox doesn't notice until I restart it. How can I make Firefox notice the change without restarting it?

I discovered that I can do this by ticking Work Offline in the File menu, and then immediately unticking it again.
(I believe this mimics what would happen if the operating system disconnected and reconnected from a wireless network, which would be a situation where Firefox would need to check for new DNS servers. So that explains why it works.)

How can I bookmark a page that doesn't allow the dropdown menu to choose "bookmark this Page"

I am on the web page Rothlynn.com and am not getting the option"Bookmark this page" from the drop down menu. How can I bookmark?

Click the star at the right end side of the location bar once to bookmark the current site and click the highlighted star a second time to open the "Edit This Bookmark" window and move the bookmark to another folder or edit the name.
* https://support.mozilla.com/kb/how-do-i-use-bookmarks

HT1461 How can you make more 'Ram' available using bootcamp, on the windows side of things??

Hey, i recently bought an iMac 20.5' (i5) and it came with 4gb Ram
I am a music producer but the program i use is windows based, so i got bootcamp, all that works fine
but ive been working on a new song for a while now and the prgoram has an 'indicator' showing how much CPU usage % and ram is being used.
it is now at 1956mb! which should efffect because i have 4gb! right!??.. no it says (in windows sytem) 2.3gb (available)....
So i went out and bought an extra 4gb, followed the instructions and Ram went int easy!!. I log onto Mac and yep 8 GB Of RAM!!
so then i log into windows (through bootcamp ofcourse) and still 2.3 gb available....
anyone know if i can make more avaible?? or do i have to reinstall windows through bootcamp???
Thankyou
P.S. 32 but windows 7 is what i use

Windows installed using Boot Camp uses all your comptrer's resources.
Windows 7 32 bit can only use about 3 GB of RAM. The limitation is that 32 bits can not address more than this. If you want to address and use more RAM then you need Windows 64 bit.

How can I import NEF and JPEG in Aperture at the same time from my D200

I have my D200 and shoot in RAW and JPEG.
why is it when I import in the library that I only see the NEF files and not the JPEG.
I want to import both the extensions, because I shoot all my pictures in RAW and JPEG and I only want to store the 4 and 5 stars rated pictures in NEF and lower rating I want to store just as JPEG.
Thanks for any help, Frank

You assume that I speak and write Dutch.
My apologies to all of you who don't/cannot read/understand Dutch. The following is in Dutch and not Double Dutch.
It explains in some detail how to setup a workflow in Automator for separating RAW and JPEG files and importing the result in Aperture.
If someone wants the explanation in English: post a message.
Ga naar
http://www.completedigitalphotography.com/?p=408#more-408
en haal de Separate Jpeg's action.
NB. Ik ken alleen de Engelse namen van de mappen.
Plaats de Separate Jpeg's action hier
~/Library/Automator
Automator
Automator opstarten
Kies Bestand, Nieuw
Paneel Library: selecteer Finder
Paneel Action : selecteer een sleep "Separate Jpeg's" naar Workflow paneel
selecteer en sleep "Get Folder Contents" naar Workflow paneel (einde)
Paneel Library : selecteer Automator (PAS OP: Automator wordt geladen; weg ermee)
Paneel Automator: selecteer en sleep Import Photos naar Workflow paneel (einde)
Opslaan als Finder Plugin in de map
~/Library/Workflow/Applications/Workflows/
Gebruik
Selecteer een map in Finder die RAW and JPEG bevat.
Ctrl-Click of rechts klikken
In het context menu navigeer naar Automator
Selecteer Separate JPEG's
De rest gaat nu automatisch
Succes
Berend

How can I execute on a terminal a program choosing the virtual Desktop

Hello, this is the situation:
I have gnome, with 4 virtual desktops, and I am located for now on Virtual Desktop 1 with an opened Terminal. And I want to execute GIMP on the 4th Virtual Desktop. Is there any command to make executing directly GIMP to the Virtual Desktop 4 without having to go explicitly to Desktop 4?
Greetings

Look for an application called devilspie. If you can't figure out how to write the configuration for starting gimp on 4th desktop, say so.

How can I delete a podcast thats only on my iPhone, not synced from iTunes.

I have two podcast episodes that will not delete from my iPhone. They are from a show that I update (by syncing) everyday and appear on the iPhone (since October) but will not erase or appear on iTunes. Can I delete them straight from the iPhone or do I need to connect it with iTunes to delete? It is more of a nuisance than anything else. Thanks for the help.

Yes, you can delete from iphone:
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
It is covered in the manual.
Page 172:
"Delete a podcast: In the Podcasts list in iPod, swipe left or right over the podcast, then
tap Delete. "

Mail, how can you remove an image that shows up in the header?

I have no idea how this image got where it is, but I would like to remove it. When I open Mail, I see in the address area of the email as it displays in the message viewer, to the very right of that area, there is an image, that I have no idea how it got there or how to remove. The following is a link (I think) Mail/Users/alaska_juliens/Desktop/Picture 7.png ...... that shows what I am talking about. I have gone through my signatures and made sure that image isn't in there and it isn't. Please help, it is driving my husband nuts, we would love to change the image to his company logo if possible, but we don't know if that image even shows up when others receive email from us or not (we email ourselves and it is right there in the address header of the email). Thank you for your time and help.
Mail/Users/alaska_juliens/Desktop/Picture 7.png

Typically what shows up there is the address book picture for that contact. If they attach an image it will be added to the address book.
So go to the contact in address book and change or delete the image.

How can we execute an *.exe that is present on the client side from Server.

Similar Messages

Maybe you are looking for