How can we find out how many programs are stored in a percticular package

Hi,
I need to find out how many programs are stored in aperticular package.
For example we are having one package in our project. I need to give all saved programs details into this project. How can we find this.
Thanks in advance.

Hi,
From TADIR table we can find out.
Regards,
Jyothi CH.

Similar Messages

How to find out Which SAP programs are affecting Which Z programs?

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

HT1689 How can I find out what 5 devices are connected to my itunes account

How can I find out what 5 devices are connected to my iTunes account?

There is no list available from your end.
(78933)

How to find that how many mailboxes are stored in each database

Hi every one.
Good evening
My question is, i have two databases in exchange 2010 server and i have around 150 mailboxes in both databases.
mdb01 & mdb02. I need to now how many mailboxes are stored in each database like
pls see example.. this is just a example..i dont no how many are stored in each datbase :-(
mdb01----20 mailbox
mdb02----130 mailboxes
and also i would like to know about the below details also
available mailboxsize in each database----DBsize---DB white space--
Thanks for your kind help
Karan

To see how many mailboxes you have in each database, run:
Get-Mailbox -Server <ServerName> | group database | ft Name,count -AutoSize
...and to get a hunch of how much free space you have available, run
Get-MailboxDatabase -Server <ServerName> -Status| ft Name,databasesize,available* -AutoSize
...but to get the exact amount of free space, you need to dismount the database and run
eseutil /ms
See:
How To Check Database White Space In Exchange
Martina Miskovic

Need help to find out where my forms are stored locally on my PC

Is there an easy way to find out where my forms are stored?

Hi;
What is it you would like to do? I am guessing you are referring to forms in the FormsCentral desktop application and not the web site. The forms in the Desktop application are not stored in a way you can access or use them other than through the application. You can export and save locally any form as a "FormsCentral Design Template" which can be shared with anyone and re-imported into FormsCentral.
If you can give me more details about what you would like to do I can help further.
Thanks,
Josh

How can we find out Standard Modified Programs

HI Friends,
How can we find out the Standard modified program.
The Standard Programs which are modified by user using Acess Key.
Thanks,

In table ADIRACCESS you will find all objects for which an access key has been used.
regards,
John.

How can I find out specifically what plugins are missing? Am told missing, then plugin finder tells me no suitable found, I would look for them myself but have no way to find out what exactly need to look for.

I go into a wiki created by my employer, and get the bar at top of page almost immediately telling me there are plugins needed. I click the button offered for finding plugins, and almost immediately am told no suitable plugins are found. Plugin help offered is useless, because I have no idea what plugins I need to look for. How can I find out what plugins are being detected as "missing"?

If there is no LR edits to keep, or if you don't want to keep the existing edits, you could delete the files from LR and import them again.
Since the file names on disk and file names in LR don't match, you will need to manually match them up by hand individually, if you want to keep the existing LR edits.
The easiest approach to this -- without doing any script programming -- is to go into each directory, one at a time:
Select the correct folder in the "folders" pane. Right-click "show parent" as necessary to see the directory tree.
Sort the LR Library by creation date.
Using the details view in File Explorer, sort the files by creation date (add to the viewed columns if necessary).
Assuming no more than 1 image per second, the files should line up.

How can I find out what apple IDs are tied to an email address

We are trying to set up FaceTime and got the verification error on the email address. We went in to the Apple ID account and when we verify the email address, it tells us that it's tied to another AppleID. My daughter has 3 other AppleIDs and we've checked each one of them and the email address is not tied to any of them.
How can we find out what apple ID is tied to this email address?
We have used the "Forgot my Apple ID" function and used all 3 of the different email addresses she's used on the accounts and when we access the one that says there's a duplicate, it takes us to the account and it's the one with the email address that I noted above.
Any thougts or help?
Thanks!

Itunes limit includes computers.
http://www.ilounge.com/index.php/articles/comments/managing-devices-in-your-itun es-store-account/

My hard drive is full, i'm being told i have 284.03 GB of other. How can I find out what these files are so i can delete them?

My Mac is telling me that my hard drive is almost full, i have used 7.65 GB for Audio. 16.58 GB for Movies, 9.89 GB for photos, 788.6 MB for Apps and 284.03 GB for Other. how can i find out what "other" is so I can delete it? I hope someone can help me.

If OS X is reporting you need to remove some items you obviously have a more severe issue.
To fix your issue is likely too complicated and lengthy to go into all of it here as it sounds like a OS X issue, it will require the services of person very familiar and experienced with Mac's to first recover your data and then restore OS X back to a functional state which may or may not require new hardware/software installed.
If your under warranty or AppleCare, take it in for service.
You can also hire the services of a local Mac computer support technician experienced in these matters.
Have them look at your Wifi, RAM amount, extra storage and computer backup proceedures in the process.
Good Luck.

How can i find out which apple ids are associated with my ipad

When I sync my iPad I get the message that some songs cannot be updated because only 5 Apple IDs can be associated with an iPad. I am aware of three that we use in my family - mine and my two sons. How can I find out what other Apple IDs are associated with my iPad?

Itunes limit includes computers.
http://www.ilounge.com/index.php/articles/comments/managing-devices-in-your-itun es-store-account/

How can I find out which vi's are dynamic?

I am working on a project made up of hundreds of VIs. I have to make an standalone executable version of it. I was not the original developer. Is there a way I can scan the vi's to find out which of them are dynamic? What should I be looking for as a telltale sign of being dynamic (What makes a vi dynamic?)
Are all vit's dynamic? (I was told by my senior developer to include all vit's in the dynamic section of the build dialog box.)
Message Edited by rashid19672008 on 02-27-2008 03:25 PM

This is not a property of a VI, but rather a way of using it. You can call any VI either way (or both ways), so whether a VI is called dynamically depends on your code.
One way of finding whether a VI does not have static calls is to open all the VIs in the hierarchy at the same time and then go over each of them in a loop, open a reference to it and check its "Callers" property. If the array is empty, it means that this VI is not called by any other VI currently in memory and might be called dynamically. It might also mean that it is an old VI and is not used any more.
Another option is to create a copy of the hierarchy using File>>Save With Options. LabVIEW will only copy the VIs which are called statically and you can then compare the hierarchies for files which are only found in the original.
Try to take over the world!

How Many Programs Are Preinstalled?

How many apps are preinstalled on this thing when you buy it?

Just go to the Apple Store page:
Mac OS X v10.4 Tiger
Tiger offers the amazing Spotlight search technology, handy Dashboard widgets and hundreds more features. Tiger also includes the following system applications:
• Safari 2
• Mail 2
• Address Book 4
• iChat AV 3
• iCal 2
• Font Book 2
• DVD Player 4.5
• Preview 3
• Xcode 2
Included software
MacBook Pro comes with an incredible bundle of Universal applications that run on both Intel- and PowerPC-based Macs:
• iLife ’06
• iWork ’06 Trial
• Front Row
• Photo Booth
• Comic Life
• OmniOutliner
But if you included ALL the apps such as utilities etc. it would add up to hundreds.
Ian

Where can I find out what the rules are for extracting Purchase Orders?

Hi all,
Relating to BI 7.0, ECC 4.6
From a business perspective we are looking to be able to identify ALL the rules/criteria for Purchase Orders when they are extracted in ECC to BI.
The datasource is 2LIS_02_ITM
For example deleted PO items are not extracted to BI, nor where LOEKZ (Memory flag =X).
In brief there is criteria that identifies which PO items are extracted.
Where can I find out what ALL of these conditions for extraction are?
I have looked in the extractor program MCEX_BW_LO_API and there is a class for filling the a table but I cant see any criteria here to how it decides WHAT to extract i.e where in the code the criteria is set.
Also this of course could be set in customizing somewhere?
Anybody know where?
Thanks in advance.
Steve Jones

you can also check the start routines in BI for 2LIS ITM, there are a few exclusions and PO deletions there.
you can find more information in SAP Notes.
reagrds
Ramesh

My older iPod Touch has music from another Apple ID, but I have had multiple other Apple IDs and I can't find out which ones they are from. I would also like to know how I can copy the music and have it saved to my computer as an audio file.

So I have an iPod Touch, 2nd or 3rd gen., and it has music synced from multiple Apple IDs. I need to know how to copy that music as an audio file to save on my computer.

You can copy iTunes purchased from a device to your computer's iTunes library via File > Devices > Transfer Purchases - if the account is authorised on your computer's iTunes then you should be prompted to authorise it when trying to copy them.
Or there are programs listed half-way down this page which can copy them back : Recover your iTunes library from your iPod or iOS device
You can then add them to your iTunes library via File > Add To Library, again you should be prompted to authorise the account if it's not already authorised.
You can also find the account that a track is tied to be selecting/highlighting it in the My Music part of your library, or the Music section of 'OnMy Device' when you select the device, and doing 'get-info' (command-i) - it will show on one of the tabs on the popup

HT204088 Charges have come up on my bank statement, i have no computer just an ipad, how can i find out what these charges are for?

I dont know how to find out where the charges have come from?
Any thoughts?

The only way that I know of for viewing your purchase history is on a computer's iTunes (via the Store > View Account menu option), though you should be able to see (and manage) if you have any auto-renewing subscriptions : http://support.apple.com/kb/HT4098
For things such as apps, music etc you should have received email receipts from the store.

How can we find out how many programs are stored in a percticular package

Similar Messages

Maybe you are looking for