How Can we force the Hyper-V Replica to use a dedicated network between two hyper-v hosts?

Dear Team,
How can we force Hyper-V Replica to use a dedicated network between two hyper-v hosts?
For live migration, we can choose the desired network in Hyper-V Manager (Use these IP addresses for Live Migration).
I have two 10G adapters teamed together, the virtual switch is created on top as converged network with several vNICs (MangementOS, LiveMigratrion, Backup, etc...)
Each network is set with a specific VLAN to isolate the traffic.
The two Hyper-V hosts are on the same LAN and domain.
Thank you.
Regards,

I have accomplished this by using a DNS pointer specifying an IP address on that dedicated network. That will force traffic done that network.
John Johnston

Similar Messages

How can I do the difference of position (X2-X1) and (y2-y1) between two (2) cursor distinct ?

Como posso fazer uma diferença de posição (X2-X1) e (y2-y1) entre dois (2) distintos cursor?
Veja uma imagem com o erro: não entendi.
Muito obrigado.
Juscelino.
Solved!
Go to Solution.

You could do something like the following.
Message Edited by altenbach on 02-06-2010 10:02 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
CursorDiff.png ‏4 KB

How can I force the use on a specific application when I am in the Downloads window?

I have Vista and Firefox 3.6.15
when I open an email attachment it goes to the intended application but when I click on the downloaded file in Downloads it invokes OpenOffice and then it displays:
"Move background page assignment
The loading of password-encrypted Microsoft Powerpoint presentationsis n ot supported"
How can I force the use on a specific application when I am in the Downloads window?

Hi Frank!
you should catch your save-event and after saving put the following line:
oMatrix.Columns.Item(4).Cells.Item(lstRowIndex + 1).Click(SAPbouiCOM.BoCellClickType.ct_Regular);
that's it!

How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account an

How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently
it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account and in the past syncing was no problem. What setting has changed?

The phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format. When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.

How can i force my mac book pro to use an external display

how can i force my mac book pro to use an external display
my screen is black

What sort of adapter are you using?
Clinton

How can I see the information about a file used in a sequence?

How can I see the information about a file used in a sequence?

You can use pretty much any two or multiple button mouse on a Mac, right out of the box.
I use this one: http://www.apple.com/mightymouse/

How can you utilise the 30 pin VGA adapter used on the iPad 3 and iPhone 4S on the iPad 4 which uses a lightning connector?

How can you utilise the 30 pin VGA adapter used on the iPad 3 and iPhone 4S on the iPad 4 which uses a lightning connector?

See the following. Also take note below and from the linked page above that video mode is NOT supported:
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
*Note below and from the linked page above that video mode is NOT supported*
"This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported."

How can i get the list of all tcode used by user of particular module

Hi,
How can i get the list of all tcode used by user of particular module (e.g FI , MM ,PP) within year .
Regards
Vikram

Login to your SAP System
Run TCode SE16
Type Table Name : TSTCT
Press F7 Key (Table Contents )
Go to Settings in menu bar
Select User Parameters
Under Keyword select Field Label and press green check mark
Select your criteria in Data Browser and execute
You will see all t codes in there
Regards,
Yogesh

How Can i Block the Work Center Once is used in Maintainence Order

Dear Experts,
How Can i Block the Work Center Once is used in Maintainence Order in PM module.
In standard its not blocking the Work Center automatically. How this can be achieved.
Regards
Raghu
Edited by: raghu m on Apr 21, 2009 10:36 AM

Hi Muthukumar,
1. You can using the user exit or BADI to control this.
CONFPP01            PP order conf.: Determine customer specific default values
CONFPP02            PP order conf.: Customer specific input checks 1
CONFPP03            PP order conf.: Cust. specific check after op. selection
CONFPP04            PP order conf.: Customer specific input checks 2
CONFPP05            PP order conf.: Customer specific enhancements when saving
CONFPP06            PP Order Confirmations: Actual Data Transfer
CONFPP07            Single Screen Entry: Inclusion of User-Defined Subscreens
BADI
WORKORDER_CONFIRM
the above are the user exits that are available fro the CO11N tcode.
2. we have to take a help of the abaper to write coding fort his.
3. The user exit should be called for the
Work Center : YYYYY
then check the relevant Work Center Once is used in open Maintainence Order and if it has a entry if then give a error message else allow the CO11N to perform.
Regards,
Sankaran

How can I change the phone number that's used for my iMessages

How can I change the phone number that's used for my iMessages

I Know but i did a number port and the iMessages is showing up using the original number that I had when I first purchased this phone from tmobile

How can i change the default application that Lion uses to open a document?

how can i change the default application that Lion uses to open a document?

Right-click on the document, select Get Info... In the lower half of the tall window that opens is a section labeled Open With (you may need to click on the disclosure triangle to see detail). Select from the pop-up list which app should open this document. If you want that to become the default condition, click on the Change All... button.

How can I force the unlock of one locked resource?

I have locked a resource, how can I unlock the resource?
I try to call unlock function but I receive an error (ORA-31108)
Is there a way to force the unlock of a resource locked by other user?
thanks

Is there a way to force the unlock of a resource locked by other user?Yes. get a DBA to kill the session. Actually it might be better to kill the OS process.
Alternatively get the DBA to find out who the user is, and phone them up. This won't help if it's not an actual person (it might be a batch process).
Cheers, APC

How can i control the timings of my slideshow using iphoto on my ipad

Q: 1 how can i control the timings of my pupil's slideshows using iPhoto on the iPad?
Q: 2 then how can i export them?
Q: 3 how can i combine them from 8 individual slideshows to 1 for showing to their parents at an assembly?
many thanks in anticipation of your collective help
brian

Here's my take on the same thing:
Short answer: the dpi is set when you decide what size you're printing at.
Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

HT2589 We had an account that was housed on our old computer but it didn't make it onto the new one...how can I get the account balance and start using it?

We had an account that was housed on our old computer but it didn't make it to the new one. How can we find the balance and start using it again?

iTunes accounts are not located on your computer. They are simply tied to a specific AppleID. Just log in to iTunes with the correct AppleID and Password and you will be back in that account.

I just updated my phone and by mistake made a new apple id. how can i delete the new apple id and use my old one so i can access my apps? thanks

I just updated my iPhone. it prompted me to create an apple id. not being sure i did create a new one. after my phone updated i realized what i did. how can i delete my new apple id and use my old one so i can get my apps? thanks

Go to 'Settings' and 'Store' and then click on the 'Apple ID' and sign out and back in with your correct one.

How Can we force the Hyper-V Replica to use a dedicated network between two hyper-v hosts?

Similar Messages

Maybe you are looking for