How can we get LiveCycle to serve forms out of SharePoint?

Hi Everyone,
I'm in the middle of confusion here, I've downloaded lc_es2_connector_for_sharepoint_9.0.0.2_v1_win_jboss.zip since I've been using the Suse Linux Appliance installed from Adobe as trial (LiveCycleES2SP2.x86_64-0.0.4)
on the readme file (PDF) it said that I must install something to the Livecycle ES2 (page 4) like the following:
On the LiveCycle ES2 server, navigate to the folder that contains the Quick Fix installer and double-click the lces2_qf_install.exe file.
that is not possible since I'm using the Suse Linux as my Trial Livecycle, how does one test the Livecycle - SharePoint connectivity ?
Thanks.

apple.com/feedback.

Similar Messages

  • How can I get LiveCycle ES2

    I owe a copy of LiveCycle Designer ES4.  On another system I have LiveCycle Designer ES2 to used to create forms that we use in out application.  The ES2 worked great.  However, with ES4 our application will not read the fields using iTextSharp if the LiveCycle file is saved as Dynamic.  It will ready it only if saved as Static.  However saving as Static disables many of features possible if the form is Dynamic.
    My question is how can I get the ES2 version of Adobe LiveCycle also.  I don't mine paying again for this if necessary as this is a product we a lot.

    Hi,
    you won't be able to buy a new copy of ES2 from Adobe as this version is dated.
    In the past it was bundled to Acrobat Pro, so you would be able to get Designer ES2 if you have a copy of Acrobat X Pro to hand.

  • I'am 85 years old and Siri as gone so soft I cannot hear it, how can I get it to its former loudness?

    I'am 85 years old, and Siri as gone so quite I can hardly hear it, how can I get it's sound back up?. R.A.B.

    If you push the top volume button on the side and it doesn't make any difference, go into Setings => Sounds and see if the Change with Buttons option has been turned off. My grandson got into these settings on my wife's phone and it drove us nuts for weeks trying to figure it out.  He even got all the way into the accessibility settings and pushed the stereo setting all the way to the left so when the phone was connected to the car radio only the right speakers worked.
    Siri's volume is controled by the general volume controls on the phone itself.  Is the volume for your phone, ring tones, music player low as well?  If so you may have the volume turned down for the entire phone.

  • How can i get new apple id with out using credit card or visa card

    how can i get a new apple id with out using credit card or visa card?

    Hi xianlycier06,
    If you are looking to create an Apple ID without using a credit card, you may find the following article helpful:
    Apple Support: Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
    http://support.apple.com/kb/HT2534
    Regards,
    - Brenden

  • How can I get my system in and out of DOS mode?

    How do I get my system in and out of DOS mode?

    There is no "Dos-Mode" in OSX.
    Guessing that you tried to run an .exe file while in OSX ?
    These are meant to be run in Windows.
    Stefan

  • How can I get LiveCycle Designer 7.1?

    I'd like to know how I can get LiveCycle Designer 7.1.
    I have Adobe Acrobat 7.0 Professional and LiveCycle Designer 7.0.
    How to update?
    Please tell me about infomation.

    LiveCycle Designer 7 was packaged with Adobe Acrobat 7.0 Professional.  I would suggest buying the latest version of LiveCycle that suites your needs.  Check out http://www.adobe.com/products/livecycle

  • TS1398 How can I get the verify server page to appear, again?

    Accidentally dismissed pop-up about server verification, now I cannot connect to wifi. How do I get pop-up to reappear? I have pushed "forgot this network multiple times, turned phone on and off, reset network settings, all to no avail.
    Suggestions?

    Lee Jay for USA president.
    Thanks a lot Jay. Right clicking on a panel brought up QUICK  DEVELOP. I've searched through books galore and none mention this.
    Regards
    Mike

  • In Java,how can I get remote oracle server's system time using a XAOracle datasource

    I want to get remote oracle server's system time,for example,I use a TxDataSource:
    DRIVER className:weblogic.jdbc.oci.xa.XADataSource
    URL:jdbc:weblogic:oracle:lanhaibo
    JNDI Name:
    the following is the code which shows the exception that: sqlexception:the JDBC2.0
    method is not implemented,why? what should I do?:
    Properties prop = new Properties();
    prop.put(Context.INITIAL_CONTEXT_FACTORY,
    "weblogic.jndi.WLInitialContextFactory");
    prop.put(Context.PROVIDER_URL,"t3://"+"localhost"+":" + "7001");
    initCtx = new InitialContext(prop);
    DataSource ds = (DataSource)initCtx.lookup(strDataSource);
    Connection conn = ds.getConnection();
    String sqlQuery = "select to_char(sysdate,'yyyy') YYYY,to_char(sysdate, 'MM')
    MM,to_char(sysdate, '" +
    "dd') DD,to_char(sysdate, 'hh24') HH,to_char(sysdate, 'mi') MI,to_char(sysdate,
    '" +
    "ss') SS from dual"
    preparedStatement pstmt = conn.prepareStatement(sqlQury);
    StringBuffer sb = new StringBuffer();
    ResultSet resultset = pstmt.executeQuery();
    if(rs.next()){
    strYear = rs.getString("yyyy");
    strMonth = rs.getString("MM");
    strDay = rs.getString("DD");
    strHour = rs.getString("HH");
    strMinute = rs.getString("MI");
    strSecond = rs.getString("SS");
    sb.append(strYear);
    sb.append("/");
    sb.append(strMonth);
    sb.append("/");
    sb.append(strDay);
    sb.append(" ");
    sb.append(strHour);
    sb.append(":");
    sb.append(strMinute);
    sb.append(":");
    sb.append(strSecond);

    Joden asked:
    "I want to get a remote oracle server's time by XADataSource,
    use:"select sysdate from dual", but return a null value,and give
    the message"sqlexception the jdbc2.0 method is not implemented",
    why?"
    Let me see your code. A simple executeQuery() should do the trick:
    Statement s = c.createStatement();
    ResultSet r = s.executeQuery("select sysdate from dual");
    while (r.next())
    java.sql.Timestamp t = r.getTimestamp(1);
    Guillaume Grussenmeyer wrote:
    Hi.
    I guess you are using weblogic.jdbc.oci.xa.XADataSource as a
    datasource.
    Weblogic JDriver for Oracle "implementation" is really weak as a lot
    of methods are not implemented.
    This is why you get this message.
    You may find the (very impressive) list of non implemented methods at
    http://e-docs.bea.com/wls/docs70/oracle/API_joci.html#1162621 (sorry
    HTML links don't seem to work here).
    Any call to one of this methods will give you these nasty message and
    exception.
    Try to use the "official" Oracle JDBC driver XA Datasource
    (oracle.jdbc.xa.client.OracleXADataSource) instead of Weblogic JDriver
    for Oracle one's.

  • How can I get BT to listen & sort out a problem no...

    Hi
    Been having problems since Sep 2012 when I ordered my broadband & land line package. Paid in advance for 1 years line rental to get the discount. My broadband etc. never got going. Could not find out why. Since then has been one thing after another trying to sort. BT now demanding more money from me and will not listen to me re how to sort this out and instead want to engage a debt collection company/ take me to court for something that has come about due to their own negligence/competence issues. How do I get in communication with someone who will listen, explain to me where my broadband package is and recognise the contribution of BT to this mess & help sort it out? For my endeavours - I've been past from pillar to post - Extraordinary!
    Thank you.

    Dear Stephanie
    Events thus far –
    Sep 12 – I tried to purchase the all in broadband, telephone line rental package advertised by BT at the time. After a number of attempts I achieved this and took the discount option to pay for a year’s line rental in advance. (I have the copy of the order confirmation and monies paid).
    The new router did not arrive so made numerous calls but could not establish status/why my router had not arrived or how can we sort this out.
    I sent in a complaint over the BT web site. I received a complaint ref no. Saying we will get back to you in 72 hrs. I heard no more! I then sent a separate email saying the same – what’s happening/how can we sort etc., to a member of staff @ BT I had been given to understand might help. I heard nothing. I was getting nowhere with BT who seemed at a loss to explain, despite my own endeavours to acquire the service I desired as was advertised. I was left with the purchase order confirmation and only the complaints acknowledgment as formal status – Outstanding/unresolved as far as I was concerned & had gotton lost in the myriad of departments/you need to call this number circle.
    I considered that my only option to get my own broadband & line service was to go elsewhere and proceeded to do so. We are still in the month of Sep 12.
    Oct 12 – By around 4th Oct I had my service at last albeit from another provider. It was for a similar ‘all in’ package where I again paid up front for discounted years line rental. I have itemised phone call bills from the new provider from this date.
    I was still waiting to hear from BT re my September experience but heard nothing.
    Nov 12 – Mid Nov I received a bill from BT for phone line charges for the period of 10th Nov 12 to 9th Feb 13! The letter went on to say these monies will be taken from my account on 24th November. Not being able to make sense of this, I phoned BT on 20th Nov 12 @ 3.50pm and explained the aforementioned. ‘ok, I’ll look into and come back to you’ or similar was how it was left. I got no further advice or explanation.
    Notwithstanding my call on the 20th Nov, I now understand that BT went on to collect the monies for the charges to Feb 13 only not from my account!!
    Why did this money get taken?? I still do not know despite my trying to find out and resolve.
    Dec 12 – I understand this third party who had inexplicably had this money taken went on to recall the money (understandable) via the banking indemnity scheme. Meanwhile BT (inexplicably) credited this third parties account by £52.14! Around this time I received a credit not saying my bank account will be credited by the same!
    Some of these Dec 12 goings on I have only recently established(Feb 13). Mad.....
    Feb 13 – I receive a letter from BT dated 5th Feb demanding immediate payment for the monies that were called back by the third party last Dec!
    On 6th Feb I get a letter from the Debt Recovery Unit giving me 10 days to pay these charges (line rental etc. from Nov 12 to Feb 13!) or else the full might of BT’s legal team & costs will descend upon me!
    I can’t explain what it has been like since receiving that letter and my almost infinite attempts and correspondence with BT to sort this out. I’ve been battered with the ‘we’re right/you’re wrong’ attitude with no recognition or explanation from BT as to why they took the money in the first place or why they did not supply my, still outstanding order last September.
    I have since established the BT were aware of my action to move to another provider by at least 25th Sep 12!!
    I’ve tried & tried here, well beyond the call of duty spending something like 30 man hours on this to resolve. I’m left waiting for the knock at the door from BT’s legal team.
    Yours,
    Wits end am I!

  • Bought by a game on the apple store for an ipad but it has now frozen how can I get it to work with out paying again?

    Game through the apple store has now frozen on my ipad.  How do I get it to work again?

    Hi there,
    You may want to take a look at the troubleshooting steps found in the article below.
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/TS1702
    -Griff W.

  • How can i get the name of form object

    hi
    can anybody tell me how we retrive the name of form on our webpage
    i try it
    document.form[0].name (i define a function in javascript for matching purpose and i want to get the form name in this function)

    Hi,
    The following example gives you an idea. Implement according to your needs
    <html>
    <body>
    <form name="testform">
    <input type="text" name="txt" value="tesg ">
    <input name="submit" type="button" value="click" onClick="this.form.txt.value=this.form.name">
    </form>
    </body>
    </html>bye for now
    sat

  • How can we get data from One Form to Another Form

    Hi All,
    I have 2Forms.I'm calling one form from another form buy using next form button.
    If i press itis opening 2nd form,Simultaneously i have to get the data to the 2nd form.Can any one help me in this.
    Any triggers has to be fire tell me the solution
    Regards
    Siva

    you may have better success over here
    Forms

  • How can I get the iCal server to work correctly?!

    We are a business that uses Apple software and products for everything! For a while we've been having an issue with iCal - it seems when an invite is sent we are unable to accept, we click 'accept' but the message is never sent, so then it looks like we're ignorning the request (which of course can look un professional). We have approached various IT companies and all they seemt o sugegst is using a different Mail Server (such as Kerio, Exchange etc) as a fix, which of course is quite costly, especially when we believe, that iCal should be  able to work effectively for a growing business.
    We've deleted users from the server, added them back on...the only way they can accept invites is if they keep it on the local calendar, which of course isn't any good to us as we share the calendars, therefore it needs to be on the server.
    I'm really hoping there is something someone out there can tell me to help us! I am loosing hope and I am reluctant to fork out for such costly solutions as Kerio when I know iCal server can work. Please help! If you need any further information please let me know.
    Thanks

    One product that I have used, when there is a poorly formed AVI header is Digital Video Repair (cannot recall if it is freeware, or shareware), BUT it is likely that your file's header was NEVER written, so no amout of "repair" will succeed. Still, might be worth a try?
    With many AVI's, the header often comes first, where with some other formats, like MPEG-2 and WMV, the header is the last part of the file. Could be that the header of the AVI is just incorrect, such as with the Duration. Only a test will determine if you can repair the file.
    Good luck,
    Hunt

  • How can I get Address Book Server to share contacts between users?

    I want to have a Shared Address Book for the users on my installation of OS X Lion Server. Users will keep their own contacts individually but there are certain lists and contacts who need to be shared between users and I can't find any way of getting Lion Server to do this. I know it was a problem in Snow Leopard Server but I hoped it had been fixed.
    Any suggestions?

    Create a new user on the Server called 'ouraddressbook' or whatever. Exit the Server. Into Address Book on your Admin/Client machine create a new Account. Account type is CardDAV, Username and Password the same as the User you created on the Server… 'ouraddressbook' or whatever, and then enter your Server's address as text or numbers. Click creat and the rest is straight forward. Now give the set up details of that new Account to the others who want to share your 'ouraddressbook' with you.The Clients must have, I think, Mac OS 10.6  or upwards to have an Address Book that with co-operate.
    You will see a new group in Address Book.
    If you don't already know, do not add accounts to Address Book or iCal on the Server. Everything is Admin and Client Side. In the beginning I was also adding accounts to iCal and Address on the Server. It works fine but it is just one extra thing that could become corrupted. Let the Server 'serve' the Users you create on it.
    Hit me if you have problems.

  • How can I get multiple values from form as a list ?

    we designed a form , and there are some attributes designed as checkbox , the data in the form is like following :
        <xml ......>
                <party>11</party>
                <party>22</party>
                <party>33</party>
        </xml>
    Is there any easy way to get the parties' data from the xml into a list predefined as a process varible  ?
    Any help is appreciated !

    You woudl use a setValue service and use xPath expressions to extract the individual party nodes from the inbound XML and then populate the list with these values.
    Paul

Maybe you are looking for