How can we handle material loss factor in transportation in APO

Hi Experts,
Steps I am doing:
1) We have STO from one plant to another and for that we have created transportation lanes.
2) And also I an using Transportation resource category type -T and assigned to t-lane.
3) Now the material loss is 3% in transportation.
Where in T-Lanes or transportation resource we can maintain this loss factor?
Thanks for your help in advance!
Regards,
Hitesh

Hi Hitesh,
There is loss factor field in resource used which
specifies the bucket resource capacity reduction
The technical name is APO_LSSFCT. I am not sure
whether this field is maintained directly in the resource
or system takes up this value through some calculations in
background
Regards,
R. Senthil Mareeswaran.

Similar Messages

How can I handle the EDI_DC40 segment in transport process? Urgent!!

Hi,
my scenrio: File -> PI -> IDoc.
In IDoc Receiver CC the indicators: Apply Control Record Values from Payload, is actived.
Im Mapping the segment EDI_DC40 is also filled. The fields SNDPRN and RCVPRN are mapped via a UDF to get file name.
So far so good.
During transport I meet problem.
The segment EDI_DC40 is set with ALE information of test systems. After transport the segment EDI_DC40 in productive system has also the same ALE information of test systems and the design objects in product system are not allowed to be changed.
It is not good!
How can I deal with this case? At first I change ALE data to productive Systems, then transport them? After transport I change them back to test systems? It is so troublesome.
Anyone has good suggestions?
Thanks and Regards
Rene

Hi Rene,
                  I never tried this signature tab feature. But you are going to set this parameter values then , I think you need to set them separately for test and for production, since they will vary with environment. But if you use the method given by Mahesh, myself or the filename with "prod" attachment (as suggested by you), the EDIDC parameters will be set dynamically. You need not alter or set any values separately for test or production env.
Here is the UDF in case you are determining the value from source directory
public String getDirName(Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
String ourSourceDirName = conf.get(key);
String sndprn;
// say source dir is    /usr/test/inbound
if(ourSourceDirName.indexOf("test")>=0)
      sndprn="XYZ";
// say source dir is    /usr/prod/inbound
else if(ourSourceDirName.indexOf("prod")>=0)
      sndprn="ABC";
return sndprn;
Map this UDF to "SNDPRN" field of target XML.
Ensure the following events
1. Sender Communication Channel has ASMA properties and Directory ticked
2. UDF has no input as variable
I am just sharing my thoughts, and also I am not aware of signature tab(i am working in PI 7.0).
regards
Anupam
Edited by: anupamsap on Oct 5, 2011 2:36 PM

How can I edit material from 1 or more dvds that I created from my own filmed material in iMovie but which I no longer have in iMovie

How can I edit material from 1 or more dvds that I created from my own filmed material in iMovie but which I no longer have in iMovie

You need to 'reverse engineer' them :
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

How can we handle browser settings while dealing with the security ?

Hi ,
how can we handle browser settings while dealing with the security ?When we configured security in web.xml , during the first request the container is asking for the authentication credentials once they are provided it go's on. but when the user gives a fresh request from the second window within the same browser that time it is not asking for authentication. How can we overcome this.Is there anything to do with server configurations?
How can we make the container no to keep the things or act like session?

Ya... I am taking a small example need not happen always but a kind of possibility i am thinking off.
once the user sign out and just left without closing the browser and a friend (suppose not a good friend ... just kidding...) of that user may open the same jsp or file .This time the security is breached. If that feature or property exists....
I know what you might say ... the user will log-out before leaving where a programer might invalidate the session at the time of log out.
Consider the case of a bad Programing or just a programer might forget to invalidate,At that time as a application administrator how can he solve that issue.
Thanks.......
Edited by: user8483670 on Jun 6, 2011 1:08 AM
Edited by: user8483670 on Jun 6, 2011 1:09 AM

How can you handle Third Party Payment in Oracle Payroll

People I hope you all are at your Good Health!
I have a question and that is i would like to know how i can restrict a dependent from getting an Insurance benefit after he has crossed the Age =18 Also the To date must be calculated and populated automatically.
Also, how can we handle this third party payment in the Oracle Payroll.
All comments are welcomed.
Chetan

For the payment piece, create a payment method on the person record as a third party. you would need to have setup the recieving party as a third party organization before setting up at employee level.
During normal payroll processing, you may run Third party check writer to generate a check .
Ankur thank you for the response i have understood that we must create a Payment Method and Check the Check box for Third party Payment on Payment Method window.But how will that be handled for case where an employee has taken a Loan from a Bank and he has to be deducted every month from his salary how can we handle such a requiremet.
I did not understand when you said :
"you would need to have setup the recieving party as a third party organization before setting up at employee level.
During normal payroll processing, you may run Third party check writer to generate a check ."
Could you please explain me.
Regards,
Chetan

How can we handle multiple applications in session method

how can we handle multiple applications in .. session method.
can any body reply me.
thanks

Hari,
hi Check out this sample code to use session method
REPORT ztest_report
NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZRASH.
                Internal Table Declarations                          *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
         KUNNR(10),
         BUKRS(4),
         KTOKD(4),
         ANRED(15),
         NAME1(35),
         SORTL(10),
         STRAS(35),
         ORT01(35),
         PSTLZ(10),
         LAND1(3),
         SPRAS(2),
         AKONT(10),
       END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
         KUNNR(10),
         EMSG(255),
       END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
         KUNNR(10),
         SMSG(255),
       END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
       V_TLINES LIKE SY-TABIX,
       "For storing total records processed.
       V_ELINES LIKE SY-TABIX,
       "For storing the no of error records.
       V_SLINES LIKE SY-TABIX.
       "For storing the no of success records.
         Selection screen                                            *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
             V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
         Start-of-selection                                          *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
       TOP-OF-PAGE                                                   *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
         End of Selection                                            *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*&      Form form_uploadff
    Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = LV_FILE
    FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
    HEADER_LENGTH                 = 0
    READ_BY_LINE                  = 'X'
    DAT_MODE                      = ' '
IMPORTING
    FILELENGTH                    =
    HEADER                        =
    TABLES
      DATA_TAB                      = IT_FFCUST
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
    DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
    DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM.                    " form_uploadff
*&      Form Form_bdcgenerate
    Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
    PERFORM POPULATEBDC USING :
                                'X' 'SAPMF02D' '0105',
                                ' ' 'BDC_OKCODE' '/00' ,
                                ' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
                                ' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
                                ' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
                                'X' 'SAPMF02D' '0110' ,
                                ' ' 'BDC_OKCODE' '/00',
                                ' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
                                ' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
                                ' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
                                ' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
                                ' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
                                ' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
                                ' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
                                ' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
                                'X' 'SAPMFO2D' '0120',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0125',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0130',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0340',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0360',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0210',
                                ' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0215',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0220',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0230',
                                ' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
    CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
    MESSAGES INTO IT_CUSTMSG.
    IF SY-SUBRC <> 0.
*--Populating the error records internal table.
      IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_ERRCUST.
      CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
      IF V_FLAG1 = ' '.
        PERFORM FORM_OPENSESSION.
        V_FLAG1 = 'X'.
      ENDIF.
*--Inserting the error records into already open session.
      IF V_FLAG1 = 'X'.
        PERFORM FORM_INSERT.
      ENDIF.
*--Populating the Success records internal table.
    ELSE.
      IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_SUCCUST.
      CLEAR IT_SUCCUST.
    ENDIF.
*--Displaying the messages.
    IF NOT IT_CUSTMSG[] IS INITIAL.
      PERFORM FORM_FORMATMSG.
    ENDIF.
*--Clearing the message and bdc tables.
    CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
    PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM.                    " Form_bdcgenerate
*&      Form populatebdc
      FOrm to Populate the BDC table.
FORM POPULATEBDC USING    VALUE(P_0178)
                           VALUE(P_0179)
                           VALUE(P_0180).
IF P_0178 = 'X'.
    IT_CUSTBDC-PROGRAM = P_0179.
    IT_CUSTBDC-DYNPRO = P_0180.
    IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
    IT_CUSTBDC-FNAM = P_0179.
    IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM.                    " populatebdc
*&      Form FORM_OPENSESSION
      Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
   EXPORTING
     CLIENT                    = SY-MANDT
     GROUP                     = LV_SESNAM
     HOLDDATE                  = '20040805'
     KEEP                      = 'X'
     USER                      = SY-UNAME
     PROG                      = SY-CPROG
IMPORTING
   QID                       =
   EXCEPTIONS
     CLIENT_INVALID            = 1
     DESTINATION_INVALID       = 2
     GROUP_INVALID             = 3
     GROUP_IS_LOCKED           = 4
     HOLDDATE_INVALID          = 5
     INTERNAL_ERROR            = 6
     QUEUE_ERROR               = 7
     RUNNING                   = 8
     SYSTEM_LOCK_ERROR         = 9
     USER_INVALID              = 10
     OTHERS                    = 11
IF SY-SUBRC <> 0.
    WRITE :/ 'Session not open'.
ENDIF.
ENDFORM.                    " FORM_OPENSESSION
*&      Form FORM_INSERT
      fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE                  = 'FD01'
    POST_LOCAL             = NOVBLOCAL
    PRINTING               = NOPRINT
    SIMUBATCH              = ' '
    CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = IT_CUSTBDC
    EXCEPTIONS
      INTERNAL_ERROR         = 1
      NOT_OPEN               = 2
      QUEUE_ERROR            = 3
      TCODE_INVALID          = 4
      PRINTING_INVALID       = 5
      POSTING_INVALID        = 6
      OTHERS                 = 7
IF SY-SUBRC <> 0.
    WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM.                    " FORM_INSERT
*&      Form FORM_CLOSESESS
      Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM.                    " FORM_CLOSESESS
*&      Form FORM_FORMATMSG
      Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
      ID        = SY-MSGID
      LANG      = SY-LANGU
      NO        = SY-MSGNO
      V1        = SY-MSGV1
      V2        = SY-MSGV2
      V3        = SY-MSGV3
      V4        = SY-MSGV4
    IMPORTING
      MSG       = LV_MSG
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS    = 2.
IF SY-SUBRC = 0.
    WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM.                    " FORM_FORMATMSG
*&      Form form_writeop
      To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
           / 'No of Error Records :',V_ELINES,
           / 'No of Success Records :',V_SLINES,
           / 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM.                    " form_writeop
Don't forget to reward if useful..

How can I handle runtime errors in Java

Please some one tell me what are runtime errors and How can I handle them using java code
This is important
Thanks in Advance
Chowdary AK

The java equivalent of function pointers is the one-instance class, as used to pass handlers to swing components, for example. Often an anonymous class is used.
Put your function signature in an interface, and pass an object that implements that interface:
public Class1 {
public interface CallBack {
    void myMethod(String arg1);
CallBack callb;
public Class1(CallBack callb) {
   this.callb = callb;
callb.myMethod("A string");
class2 {
   first = new Class1(new Class1.CallBack() {
     public void myMethod(String arg1) {
       ... do something ...

How can I handle exception? - to give user more friendly notification

Hi!
User gets an error:
'Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum =...'
How can I handle this exception (when two users want to modify the same set of data at the same time)? I would like to hide the above error message and give user more friendly notification.
Thanks in advance,
Tom

Thanks Vikas for your answer.
These workarounds are really creative and I want to use one of them. BUT my problem is to 'catch' the exception/error when two users want to modify the same set of data at the same time.
Those solutions which we can read about in this link you gave me describe handling exceptions in pl/sql processes. How can I catch the error I am talking about in pl/sql code?
Code would be like this:
DECLARE
two_users EXCEPTION;
BEGIN
IF --catch the error
THEN RAISE two_users;
END IF;
EXCEPTION WHEN two_users
THEN :HIDDEN_ITEM := 'Error Message';
END;
What should I put in a place where there is '--catch the error' ??
Thanks in advance,
Tom

How can we handle Dead lines

Hi friends,
When a work item is created. The User hasn't Approved / Rejected (hasnt taken any Action on that workflow) for 2 days, 4 days and 6 days an Escalation mail has to sent to respective concerend persons.
How can we handle this. The holidays are only Saturday and Sunday.
Client doesnt want to consider the factory calender.
Please suggest me step by step
Thanks in Advance
Ganesh

You need to make use of "Modelled Deadline Monitoring" to achieve ur requirement.
Trust me... Search this forum and you will find answer how to make use of different steps to achieve it....
Regards,
PR.

In call transaction how can we handle error records.

hai..tellme how can we handle error records in call transaction..we can get error records into one flatfile ok...then we have to execute the same bdc program with dat flat file (error records) once again...is it wright ..

Hi,
check this program u will get idea
seee this prog. its will help u .
copy and run this prog.
TYPES : BEGIN OF t_disp ,
vendorno(9),
compcc(13),
purchorg(14),
accgroup(15),
title(7),
name(5),
country(8),
ordcurr(14),
END OF t_disp.
TYPES : BEGIN OF t_err,
msgtyp LIKE bdcmsgcoll-msgtyp,
l_mstring(250),
END OF t_err.
DATA: i_disp TYPE STANDARD TABLE OF t_disp,
wa_disp TYPE t_disp,
i_err TYPE STANDARD TABLE OF t_err,
wa_err TYPE t_err.
data definition
Batchinputdata of single transaction
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
error session opened (' ' or 'X')
DATA: e_group_opened.
message texts
TABLES: t100.
PARAMETER : p_file1 LIKE ibipparms-path,
p_cmode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
*selction screen.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file1.
AT SELECTION-SCREEN ON p_file1.
IF p_file1 IS INITIAL.
MESSAGE 'FILE IS NOT FOUND' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
PERFORM f_disp_file1.
END-OF-SELECTION.
PERFORM f_disp_errs.
*& Form F_DISP_FILE1
text
--> p1 text
<-- p2 text
FORM f_disp_file1 .
DATA: l_filename1 TYPE string.
MOVE p_file1 TO l_filename1.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_filename1
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = i_disp
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*? prepare BDC data
DELETE i_disp INDEX 1.
LOOP AT i_disp INTO wa_disp .
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
wa_disp-vendorno.
'ztest_1'.
PERFORM bdc_field USING 'RF02K-BUKRS'
wa_disp-compcc.
'0001'.
PERFORM bdc_field USING 'RF02K-EKORG'
wa_disp-purchorg.
'0001'.
PERFORM bdc_field USING 'RF02K-KTOKK'
wa_disp-accgroup.
'0001'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFA1-ANRED'
wa_disp-title.
'Mr.'.
PERFORM bdc_field USING 'LFA1-NAME1'
wa_disp-name.
'test name'.
PERFORM bdc_field USING 'LFA1-SORTL'
'TEST NAME'.
PERFORM bdc_field USING 'LFA1-LAND1'
wa_disp-country.
'in'.
PERFORM bdc_field USING 'LFA1-SPRAS'
'en'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-AKONT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=UPDA'.
PERFORM bdc_field USING 'LFM1-WAERS'
wa_disp-ordcurr.
'inr'.
PERFORM bdc_transaction USING 'XK01'.
WRITE:/ WA_DISP-VendorNo,
WA_DISP-COMPCC,
WA_DISP-PURCHORG,
WA_DISP-ACCGROUP,
WA_DISP-title,
WA_DISP-name,
WA_DISP-country,
WA_DISP-ORDCURR.
CLEAR: wa_disp.
REFRESH bdcdata.
ENDLOOP.
ENDFORM. " F_DISP_FILE1
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
IF FVAL NODATA.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form bdc_transaction
text
-->P_0322 text
FORM bdc_transaction USING tcode.
DATA: l_mstring(480),
l_subrc LIKE sy-subrc.
REFRESH messtab.
CALL TRANSACTION tcode USING bdcdata
MODE p_cmode
UPDATE 'L'
MESSAGES INTO messtab.
l_subrc = sy-subrc.
IF SMALLLOG 'X'.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
LOOP AT messtab.
SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
AND arbgb = messtab-msgid
AND msgnr = messtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
WRITE: / messtab-msgtyp, l_mstring(250).
*? Send this errors to err internal table
wa_err-msgtyp = messtab-msgtyp.
wa_err-l_mstring = l_mstring.
APPEND wa_err TO i_err.
ELSE.
WRITE: / messtab.
ENDIF.
CLEAR: messtab, wa_err.
ENDLOOP.
SKIP.
ENDIF.
ENDFORM. " bdc_transaction
*& Form f_disp_errs
text
--> p1 text
<-- p2 text
FORM f_disp_errs .
SORT i_err BY msgtyp.
LOOP AT i_err INTO wa_err.
AT FIRST.
WRITE : / text-002.
ULINE.
ENDAT.
AT NEW msgtyp.
IF wa_err-msgtyp = 'S'.
WRITE : / text-003.
ULINE.
ELSEIF wa_err-msgtyp = 'E'.
WRITE : / text-001.
ULINE.
ENDIF.
ENDAT.
WRITE : / wa_err-msgtyp, wa_err-l_mstring.
CLEAR wa_err.
ENDLOOP.
ENDFORM. " f_disp_errs
Regards

How can we handle dateformat from diff countries into india in bdc with out

hi
experts can u help me pz
how can we handle dateformat from diff countries into india in bdc with out chnaging system parameters while uploading.
i.e flatfile date is germanformat
target date is indianformat.
thanks and regords.

use WRITE statement to format date.. along with extension ...
DD/MM/YY
or
DD/MM/YYYY

How can we handle table control parameter in lsmw

hi guru,
please tell me how can we handle table control parameter in lsmw.
thanks & regards
subhasis.

Hi,
we create table control program (module pool) this program use in LSMW,
we mention the transaction code ,write ur table control program name.
This is use full for u
Reguards,
lakshmi

How can we handle CLOB in Universe and WebIntelligence

Hi,
Could you explain how can we handle CLOB in Universe and WebIntelligence?If we use CLOB in either of this,how is the Report performance ?Is the perfomance of report degraded? Appreciate your help.
Thanks,
Swapna

Hi,
There is no way around this, long texts are big chunks of data that have to be moved from the database to the webi report.
Depending on how many rows of data you retrieve this can become a problem in various spots.
1) network traffic (lots of data to move over the network).
2) webi report memory (lots of data that needs to be stored in memory to work with the data).
So you need to limit the query in either the number of rows being retrieved,
or in the size of the data that is retrieved per row.
Depending on your use of message text, you can limit long text object to a smaller number of characters.
(Universe, Parameters, Controls...)
Depending on your version of database and BO, the default of this value is 1000 or unrestricted.
It might be that you just need an idea of the message and can limit this to 100 chars or similar, which should help performance.
It is also possible that the text is always 'long' padded with spaces, in this case it can help to trim the message column in the universe already.
Good luck,
Marianne

How can we handle in flex application if the server is down?

how can we handle in flex application if the server is down?

You and me both.
As ambiguous as the original question was, I think he was just asking how to handle a server exception and I would suggest generally just using a Alert.show("your specific message (eg. The server is currently unavailable)") in the place where you handle the fault return from your service or http call. I'm sure there are more complicated messaging frameworks or approaches, but that seems to be enough for my apps.

How can we handle table control in BDC?

Hi,
How can we handle table control in BDC?
regards
eswar

hi,
check this example:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
ex:
*& Report ZSR_BDC_TBCTRL
REPORT ZSR_BDC_TBCTRL
        NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
      LIFNR LIKE RF02K-LIFNR,
      KTOKK LIKE RF02K-KTOKK,
      NAME1 LIKE LFA1-NAME1,
      SORTL LIKE LFA1-SORTL,
      LAND1 LIKE LFA1-LAND1,
      SPRAS LIKE LFA1-SPRAS,
      BANKS(6) TYPE C,
      BANKL(17) TYPE C,
      BANKN(19) TYPE C,
      END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
       BANKS LIKE LFBK-BANKS,
       END OF BANKS,
       BEGIN OF BANKL OCCURS 0,
       BANKL LIKE LFBK-BANKL,
       END OF BANKL,
       BEGIN OF BANKN OCCURS 0,
       BANKN LIKE LFBK-BANKN,
       END OF BANKN.
DATA : FLD(20) TYPE C,
       CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'Z:\sr.TXT'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
TABLES
    DATA_TAB                      = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
    REFRESH BDCDATA.
    REFRESH : BANKS,BANKL,BANKN..
    SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
    SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
    SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'RF02K-KTOKK'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'RF02K-LIFNR'
                              IT_VEN-LIFNR.
PERFORM BDC_FIELD       USING 'RF02K-KTOKK'
                              IT_VEN-KTOKK.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-SPRAS'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'LFA1-NAME1'
                              IT_VEN-NAME1.
PERFORM BDC_FIELD       USING 'LFA1-SORTL'
                              IT_VEN-SORTL.
PERFORM BDC_FIELD       USING 'LFA1-LAND1'
                              IT_VEN-LAND1.
PERFORM BDC_FIELD       USING 'LFA1-SPRAS'
                              IT_VEN-SPRAS.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-KUNNR'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKN(02)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
*perform bdc_field       using 'LFBK-BANKS(01)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKS(02)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKL(01)'
                             '10020030'.
*perform bdc_field       using 'LFBK-BANKL(02)'
                             '67270003'.
*perform bdc_field       using 'LFBK-BANKN(01)'
                             '12345'.
*perform bdc_field       using 'LFBK-BANKN(02)'
                             '66666'.
MOVE 1 TO CNT.
    LOOP AT BANKS.
      CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKS-BANKS.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKL.
      CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKL-BANKL.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKN.
      CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKN-BANKN.
      CNT = CNT + 1.
    ENDLOOP.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
PERFORM BDC_DYNPRO      USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP.

How can we handle material loss factor in transportation in APO

Similar Messages

Maybe you are looking for