How can we maintain the selling price of PAC in Material Master?
Hi ALL,
We have a material that has Unit of Measures EA and PAC (based on the EA). So if i have a selling price for the UoM EA (quantity=1 EA) = 1.00 EUR the PAC (quantity=6 EA) due to conversion factors would be PAC = 6.00 EUR.
What happens though if we decide to sell the PAC less than 6.00EUR. So the EA = 1.00 EUR and the PAC = 5,65 EUR?
Based on the Concept of Conversion Factors that we use in IS Retail this is not accepted in the system.
Any feedback would be much appreciated.
George H.
You need to clean up the different objects and make it clear what is going on. Say, unit of measure is just a translation within the quantity space and should not bring about the type of product and how it is priced. When it comes to pricing you can use scale to establish quantity based discounts (say, if 1-5 is purchased the unit price is 1.0 dollar but if 6-60 is purchased the price is only0.9 as an example).Now if a PAC is six units physically packaged together then it probably would be more correct to define two separate materials in the system. This way, the price can be independently set for the PAC versus the unit EA. So, if the pack is a separate material that is priced independent and it takes conversion to bring it from PAC to EA then PAC is not a different unit of measure but rather a different product (you need to re-align your master data correctly).
Similar Messages
-
How can I maintain the classification in UI when creating a new BP?
SAP CRM 2007 (UI)
Hi,
In SAP GUI the classification can be maintained in tab classification.
How can I maintain the classification in UI when creating a new BP?
Thanks for your support.
Regards,
AVHi Anand,
thanks for your prompt answer.
By default all ship-to-parties are assigned to classification Customer. How can we assign a different classification to ship-to-parties in UI? The view Account classification seems to be different from the tab classification in SAP GUI.
Regards,
AV -
How can we maintain the Standard domain Domain ABLESGRE values
Hi friends,
In my SAP ECC 6.0 system, For the Standard Domain ABLESGRE
I can See the below Domain values maintained
01 Periodic meter reading
02 Interim meter reading with billing
05 Service territory transfer with billing
08 Meter reading upon technical installation
09 Interim meter reading
10 Control reading
If we maintain the new MR reasons
98 EBT MROu2013Specified Meter Reading Date
99 EBT MRO
as Domain Values,
when we go for F4 help in the Standard Tcode EL28
then do those entires reflect in the selection-screen ???
and do the system allow me to go furthur for working on the New Meter Reading Reasons entered with the Standard Tcodes EL28 and EL01 ???
Kindly guide me, this must be solved ASAP.
Thanks in Advance,
GaneshHi,
If you add the values in domain, then it will definately reflect in your selection screen. And you can process with it as per your requirement.
REWARD IF USEFUL. -
ME52N : How can i change the net price ?
Dear guru.
The system allow to change only the valuation price (only relevant for release strategy) in ME52N.
Does exist a chance to change in the purchase requisition the net price of source of supply assigned ?
ThanksHello,
I doubt whether any other way is there to resolve your problem.
May i know why do not want to change the Info record?
MM -
How can we fetch the gross price form billing (VF02)
Hi all,
Transaction: vf03--> press enter --> double click on item --> select conditions tab --> Here we find condition type, condition name, condition value..
Need is i want to display the 'Gross Price' for that item .
So please tell me the table where this gross price exist, and way to fetch this gross price.
Please give me the valuble answer as early as possible.
Thanks,
Ravi.if the access sequence is there for the conditions then u need to look at teh conditions applied .
let me put it this way ..
goto table vbrk-knmv get the field knumv
now goto table konv and give
KNUMV KPOSN STUNR ZAEHK KAPPL KSCHL
this will give u the KBETR VALUE AND THE CURRENCY.
Now goto table VBRP and fetch the field fkimg
unit price for the item is fetched and then multiplied by the total avaliable qty at ur item level table .
multiply kbetr * fkimg will give u the price .
this is for one condition type.
case 2.when more than one condition type is present ..
now repeat the process for the applied condition types ..
total will add to the gross price .
cross check with ur values in the item conditions with the multiplied total of kbetr and fkimg .
regards,
vijay
best thing is just take one invoice and do the manipulation for an item ..
like fetching the value of unit price , then multiply with the item level qty to the total price .
just work out urself on the paper, cross check it then apply the logic on the tables .
one example is ..
see sometimes the condition will be applicable as 2% like ur discount
so u need to calculate it as ( unit price * 2 / 100 ) = x1
now u need to deduct this value .
Message was edited by:
vijay k -
How can I maintain the font used in Adobe Edge Animate for Adobe Muse website?
I used a png file which is working perfect and then used the font Montez in Edge Animate for 2 titles, however once I published the file(live) to muse it a totally different font. Is there something in particular I need to do in Animate to avoid alteration of font. Help!
The original photo gallery is:
http://www.bethanyjanedavies.com/portfolio.html
You can see that the right side is chopped off
But I may have to compromise and use:
http://www.bethanyjanedavies.com/portfolio2.html
This is a much wider page than the rest of the website, but I suppose you have to find a compromise that works!!
Cheers
Helen -
How can I obtain the source of supply for a material?
Hi experts,
I have this issue,
I need to change the source of supply for a material in transaction ME51N and in MRP. This new source of supply is the source of supply of another material, related to the material we are creating the Purchase Requisition with a Z table. In ohter words, If the material of the PurchReq is in a Z table, we change it´s source of supply with the source of supply of another material.
For this I am using the BADi MD_MODIFY_SOURCE, here we can change the CH_LIFNR changing parameter. But I don´t Know how to get the source of supply of the other material.
Is there any BAPI or function module for doing this?
Could I do it by classic SELECTs to some standar tables? If I can, which tables should I select from?
Thank you very much and kind regards
IbaiHi,
Check table EORD.
regards,
Pole -
How can I change the language of my German copy of Master Collection CS6
Hi there,
The full Master Collection Suite v6 I installed this weekend is in German, how do I change that to english for all 20+ applications?
it's driving me bonkers trying to find a fix so if anyone can help big hugz to yoU!
EvaIt turns out I didn't notice that "Deutsch" was ticked in the installation preference screen. I must have read that as "Dutch" and continued with the install. I unisntalled the whole thing and started over.
Thanks both of you for the tips about the language swap option! Right now I need to leave it on Dutch for my course work but after that I will try and swap to English which will be much easier for work.
Thanks so much for your help!
Eva -
How can i get the open sale orders for given material no and plant
Hi,
I have to retrieve the open sale orders depending on the material number and plant.
For only open sale orders at header level and item level.
I want to use VBUK-GBSTK to find open sale order at header level and
VBUP-GBSTA at item level.
Can any one suggest me the best logic as performance is concerned?
Thanks,
Kumar.hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
vbeln
posnr
matnr
werks
erdat
kbmeng
vrkme
from vbap
into table it_vbap
for all entries in it_plant
where matnr = it_plant-matnr and
werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right? -
How can I copy the the valiation price of pr to purchase order?
Dear experts,
Could you please tell me how can I copy the valuation price of purchase requsition to purchase order?
Thanks in advance.
Best regards.
MerryCheck the following thread
Re: PR Price Should Come to PO
rgds
Dhinakar -
How can i know the price for iphone s5 in Middle East in Oman
hi..
please help me
i want to buy an iphone 5s. how can i buy it from apple store?
how can i know the real price for my country, aware that i am in Middle East exactly in Oman?
and how many time it will take to reach in my country Oman?
please help as soon as you can..
thank youAs I said, if you want to buy it from the USA online Apple store, you will need to have a credit card issued by an American Bank or financial company, you will have to have a USA billing address associated with that card, and you will have to have it shipped to a USA street address.
Aramax is a shipping company - you do not have a credit card from them and they cannot pay for your purchase. Having an account with a shipping company doesn't provide you with a USA source of payment for your purchase.
As I understand it, the Oman government does not allow the iPhone to be sold in Oman, there are no official service providers for it, and thus there is no legitimate source to buy an iPhone from within Oman.
Online Apple stores do not allow payment by foreign means or in foreign currency, they do not do currency exchange, nor do they ship internationally. -
Spent hours trying to figure this out - no luck!
I have a video tutorial course that I would like to be able to view on my iPhone, the only problem is that it is broken down into 6 folders - 1 for each subject.
And if I add the whole course to be synced via iTunes it gets copied ok. But it loses the original folder names that the files are stored in on my PC
ALL the videos files copied to the iPhone are bunched togeather in the Video app and it takes forever to figure out which one comes next.
How can I maintain the original folder names/structure that the files are stored in on my PC on the iPhone?To follow how I solved this it might be good to know what I started with:
I have a main folder which I called 'Music Theory' and 6 sub-folders: 101, 102, 103, ....etc.
with up to 20 or so videos in each one.
Note: Only import one sub-folder at a time into iTunes and then do all the following actions BEFORE importing the next sub-folder:
Add only 1 sub-folder to the 'Films' section in iTunes (either drag and drop or use the File - Add Folder to Library).
Select all the imported videos (hold down the Ctrl + A keys on the keyboard simultainiously).
Right click and select 'Get Info'
Then you may get a pop-up with this text but just click the 'Yes' button:
You should now have the 'Multiple Item Information' window showing. Click on the 'Options' tab and edit as below:
Tick: 'Media Kind' and from the Drop Down Box choose: 'TV Programme'
Tick: 'Part of a Compilation' and from the Drop Down Box choose: 'Yes'
Tick: 'Remember Position' and from the Drop Down Box choose: 'Yes'
Now click on the 'Video' Tab of the 'Multiple Item Information' window and edit:
The 'Programme' text field (I entered Music Theory) This will be the main heading for all the folders that I want to add to this series.
The 'Series' text field (I entered 101 for the first sub-folder)
Now click the 'OK' button.
iTunes now starts processing all you have done and moves the vildeos to the 'TV Progammes' section.
The first part is now done!
Now you should repeat all the actions you have done from the start on each sub-folder you want to include in this Video collection, then when you've done that you can upload the lot to your device (iPhone in my case) with this last step:
All you need to do now is select your device under 'Devices' in the left hand menu and tick the 'Sync TV Progammes' box in the 'TV Progammes' section and select the series that you want include in the right hand area. And then click 'Apply' and now your done!!! :-) -
How do we maintain the same number?
We are in the process of signing up for another year and are concerned the number we've used will expire and we will be forced to get a new number. How can we maintain the same skype number with the new year's subscription? Is this automatic? Are we on the panic button for no good reason? Please advise...
M & P @ DVillagethe subscription will automatically renew with the same number, but even if it were to expire, the number is held for you for 90 days
Regards,
Neil -
How can we update the Long texts in BP
Hi experts .
How can we maintain the long text tab in Business Partner at the time of Business partner creation using FM .This is the way I did it .
CALL FUNCTION 'INIT_TEXT'
CALL FUNCTION 'SAVE_TEXT'
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' -
How can we change the purchasing group which it is maintained in R/3?
Hello All.
In case of MM, purchasing group is assigned to material master.
It means purchasing group is maintained based on material code.
But SRM has different maintenance level.
As you know that purchasing group has the responsibility based on material group (Product category).
So we should change the purchasing group from R/3, when end user create shopping cart.
How can we change the purchasing group which it is maintained in material master?
Thank you,
Best regards,
SH.Hello So Hee,
I am not a technical guy.
But for your requirement i am building a logic.
I am not sure whether it will work.
You need to check with your ABAPER.
It is as below:
When the SC is approved and the other configuration is correct ,
PR is created in ECC by the virtue of BAPI.
You want that the pur grp should be populated on the base of matl code and not on matl grp.
Hence in SC you will not fill up pur grp.
In the programme for BBPSC01 i.e. SC creation you will add modification that it will call a custom FM.
This custom FM will get the matl code from SC and will find the value of pur grp from R/3 MM01i.e. matl master(you may get in MARA).
Now in the BAPI you need to incorporate this additional value of yr pur grp field.
So the desired pur grp as per yr R/3 matl master will be populated in yr R/3 PR.
Again: this is all hypothesis.
That's all I can help you.
BR
Dinesh
<b>Reward if helps</b>
Maybe you are looking for
-
Running Rules in 11.1.2.2 workspace webforms - issues
We are currently trying to migrate from 11.1.1.3 to 11.1.2.2 Our business rules were migrated to Calc Manager. Most of our rules are run from a web form with two options on the web form: "Use Members on Form" and "Hide Prompt". They have been running
-
Not a valid photoshop document
Had 2 files on screen, I quit photoshop and when asked to save I did, the files took a long time to save, but they did save succesfully. Trying to open the file today and I get this now: The file size looks to be of proper size at 37.8mb, and is on W
-
Hi all, In my environment I have 2 exchange 2013 servers : ex01 & ex02 in 1 DAG01. Recently my ex02 server has problem, some exchange service crash ... I'm still finding reason, maybe because lack of memory ... BTW I have a "Mailbox Database 01": Get
-
My IPAD 2 will some times not open apps that I have down load from the app store. But will open all of the preinstalled apps.I must go to the app store and install something and then all the apps will open. I should not have to install unwanted apps
-
Spinning circle when logging out
Hello everyone I'm having some trouble with my iMac. Almost every time I log out I receive a white screen with a spinning circle. After logging out I have to force shut down by holding the power button because of this. I have already tried to repair