How can we recognize the time taking for executing any process chain

Hi,
I have one metachain which consists of several local process chain. It was executed successfully. So how can I find out total time for executing this meta chain.Is there any way to find out that this process execution time is lile some hours and some mins.

ST13 trans description is Analysis & Service Tools Launch pad and is part of the ST-A/PI plugin. See Note 69455 - Servicetools for Applications ST-A/PI (ST14, RTCCTOOL, ST12) aand talk to your Basis folks to find out if they can install it since it sounds like it is not installed at your site.
Here's a list of functions the tool provides - only some are BW specific, so if you can not get ST13 authorization, see if you can at least run the pgm
Analysis/Service Tools
Name                     Title
RTCCTOOL              SAP Servicetools Update
ST12                        Single transaction analysis
SDCCVIEWER          SDCC: View data from ST-A/PI subroutines
SOS_CUSTOMER_DATA                Customer Checks for Security Optimitation
BATCH_JOB_ANALYSIS               Batch job analysis
CMO_SYSTEM_MONITORING            CMO - System Monitoring
ITSTRACEVIEW                     ITS trace viewer (SAPjulep) for EBP/CRM
STAD_DATA_GET                    Select STAD data and put to download
BPSTOOLS                         BW-BPS Performance Toolset
BIIPTOOLS                        BI-IP Performance Toolset
BW_QUERY_ACCESSES                BW: aggregate/InfoCube accesses of queries
BW_QUERY_USAGE                   BW: query usage statistics
BW-TOOLS                         BW Tools
SEM_BCS_STATISTIC_ANALYSIS       SEM-BCS: Statistic Analysis
BWQUAC_CUST                      BW Query Alert Collector Customizing
TABLE_ANALYSIS                   Table Analysis Tools
UPGRADE_TOOLS                    Tools for Upgrade
MASS_MAN_MONITORING              Monitoring for Mass Data
CUST_DMA_TAANA                   DVM: Settings for ST14 CA
PROJBROWSER                      Service Software: Local project browser
ANALYSISBROWSER                  Service Software: Analysis browser
SDCC_DOWNLOAD_SIMULATION         SDCC download simulation for ST-A/PI collectors
TEXTBROWSER                      Service Software: Short&Longtext browser
SET_SDCC_PRODUCTIVE_CLIENT       Manually set analysis client for SDCC datacollection
There were a few OSS Notes relating to ST03N dumping you might want to review to see if they need to be applied
Nothing is ever as easy as it ought to be.

Similar Messages

How can I change the time zone for a calendar entry with iOS 7?

I want to make a new entry in my calendar (iOS 7) using a different time zone as the one I'm located in. There isn't any option to choose the time zone like there is in OS X.
I know I can switch off the option to automatically change the time zone in the preference pane of Mail, Contacts and Calendar to get the option in calendar but I want to use this automatic switch.
Is there any option to change the time zone of a calendar entry without loosing this automatic switch?

Got it!
In your backing file you'll need the following in your handlePostbackData method:
BookBackingContext bookCtx = BookBackingContext.getBookBackingContext(arg0);
bookCtx.setupPageChangeEvent("PageLabel");

My backup to Time Capsule is taking over 4 million days. How can I shorten the time? I am not able to connect through ethernet. How do I fix this?

My backup to Time Capsule is taking over 4 million days. How can I shorten the time? I am not able to connect through ethernet. How do I fix this?
Not only that but my Mac Pro keep running and does not stop, my Address book has a blue light under it but wont open, the light for my monitor in the bottom right corner wont turn on or off. Please need help...

It sounds like there is an issue with the Mac itself.
Use the verify disk A5 in troubleshooting.
http://pondini.org/TM/Troubleshooting.html
Even if you cannot connect by ethernet, at current location.. you can simply disconnect the TC from the network and bring it to the Mac and plug it in by ethernet. The TC can be reset if you haven't got a suitable current setup (save previous setup before you change it) and run just as backup device.. do the backup and then return it to the network.
If this is just a standard incremental backup.. then something has broken. The issue is not the TC pe se but failure in hardware somewhere.

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

How Can I Restrict the times my BT Homehub 2.0 is ...

How Can I Restrict the times my BT Homehub 2.0 is used?
i want to make sure that the kids dont go back online on their wireless laptops after i have gone to bed!!!
how can i restrict the useage times (say 11am - 11pm) for the hub/individual users - WITHOUT taking the plug out when I go to bed!!!
thanks in advance
Paul

belial wrote:
@meaga-byte: the second of those two options can be achieved by using the "BT Powersave" function. This does mean that *everyone* will lose wifi accessibility, so no watching iPlayer be for _you_ drift off! PowerSave will turn all your wifi off and back on between particular times.
This seems a more user friendly option for thoes who are not ofay with IP addresses etc.
Unless Paul wants to use wifi while in bed
If I've helped, just click the Star - Every little bit helps
If you can't fix it with a hammer, you've got an electrical problem.

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How can I find the time a site was accessed in Safari's history?

I know that Safari's "History" list is in reverse order, that is, most recently visited sites at the top of the list. How can I find the time a particular site was visited?

As of Safari 5.1.7 there does not appear to be a way to view the time in the browser, but it is still possbile to find from the raw history file. Open /Users/[yourusername]/library/Safari/History.plist in a text editor. Depending on how your text editor reads the file, you may see a lot of garbled text, but you should still be able to find the URL that you want the time for. After the URL you may see the page's title, but should also see a left square bracket followed by numbers.
Example:
_?http://www.apple.com/_Apple[377832904.6o
The integer is an Apple timestamp (number of seconds since 00:00:00 UTC on 1 January 2001). Find a timestamp calculator online to get the actual time for your timestamp. In the example above, Apple was visited on Dec 21 2012 at 17:35:04 PST.
Cheers.

How can I get the serial number for registration and instalation?

Hello ,How can I get the serial number for registration and instalation?

contact your local sales representative.
You don't need a serial number to install LabVIEW.
Registration is optional.
Activation is needed after the evaluation period.
Install it without number and it will work for a limited time (30days?) in evaluation mode, giving you plenty of time to decide if you want to buy it.
Check the license manager to see the activation status of everything installed.
LabVIEW Champion . Do more with less code and in less time .

TS3999 how can i synch the time zone of the icloud in my pc with my iphone?

how can i synch the time zone of the icloud in my pc with my iphone?

Hi hmm15761,
Thanks for visiting Apple Support Communities.
This article may address your question:
iCloud: Change your calendar’s time zone
http://support.apple.com/kb/PH2677
Best,
Jeremy

How can I open the 'time date browse button'?

Hello!
How can I open the 'time date browse dialog' from the time stamp control in my block diagram? I tryed it with the property node but couldn't find this item to open the 'time/date browse dialog'!
Thanks in advance for your help

There is no way to programitically bring up the dialog window for the timestamp control. I recommend building your own dialog window VI that will work by opening when you want the user to set the time and when it closes, it can programatically update the timestamp control. It will not be as pretty but it will be just as functional.

How can I choose the time in WRT54G

Hi
Problem:
How can I choose the time in WRT54G?
Data:
WRT54G v5.1, firmware 1.0.9
Thank you for your attention

I don't think that you can actually "choose the time" on your router, that is, you cannot set it to an arbitrary time. The router's clock is set from the internet.
However, you can choose your "time zone" and whether or not to use "daylight saving time". To do this, open your web browser and point it to address 192.168.1.1. Enter your router password. This will take you to your router's web setup page. You can set the time zone on the bottom of this first page. Then click "Save Settings". Exit your browser. When your router has internet access, it will set itself to the correct time.

Apple TV uploads can take up to 30 minutes. I need control over this, because it interrupts my presentations. How can I control the time it chooses to do uploads?

Apple TV uploads can take up to 30 minutes. I need control over this, because it interrupts my presentations. How can I control the time it chooses to do uploads?

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

How can we recognize the time taking for executing any process chain

Similar Messages

Maybe you are looking for