How can we restrict Key Figure in the BI System

Hi All,
Can any one explain How can i restrict key figures in BI system.
So when i create a query a specific user can only execute it if a specific key figure is a part of query otherwise he is not allowed to execute a query.
For Example:
A user TEST123 is allowed to execute a query with keyfigure Quantity he is not allowed to execute the query if any other key figure is present in the query
Regards,
Deepak

Hay Diogo,
Bravo...
Your suggetions always work for me. The scenario was that
A user TEST_PLD08 should only allow to see output for the querys which consist of the keyfigure PLDQUACMP and not for other keyfigures while other user TEST_PLD07 is allowed to see the output for querys consist of any of the keyfiguers.
so I have assign a authorization profile PLD_TEST07 to the user TEST_PLD08 with KeyFigures authorization as mentioned below and it is working fine
I EQ :
I EQ PLDQUACMP
You can forward me more scenarios like this if you can think of more it will be really helpful for me
Regards,
Deepak

Similar Messages

How to identify which key figure will the numeric pointer for deltas?

Hi All,
I have created a numeric pointer for generic extraction ? but how to identify which key figure will the numeric pointer will use for deltas ?
how to identify the key figures which is suitable for numeric pointer. And the generic extraction is based upon the copa table?
Can anyone suggest me how the numeric pointer works and how to identify deltas are carried out at numeric pointer?
Thanks
Pooja

Pooja,
If you are using a generic extractor which is based on COPA table, then numeric pointer may not be the suggested delta extraction mechanism.
A time stamp would be the better one to use. In a time stamp, you can give a lower limit value of 300 seconds.. so that it will try to fetch the missed records.
Moreover, a delta would be based on a character, preferably a time char.
In your requirement, try to figure out the character on whichdeltas will be based.
Sasi

How can we restricted not to change the bach no in GR

Hi All,
When we do MIGO with ref to P.O or With ref to Out bound delivery , how can we restricted not to change the bach no.
Please guide me.
Thanks and Regards
Chandru

Hi Chandrashekar,
I am assuming that, you dont want batch to be changed duirng GR for a PO, but you can choose from existing batches in the system.
in SPRO->logistic General->batch management->Creation of New batches->Define Batch creation for goods movement.
Here you can control the way the batches can be popolated. Varous option are available which can be used too.
Please make detail process validation defore usign this option.
Please reward if useful.
thx,
MJ

How to copy restricted key figures in query designer ?

hi,
i have created a query in query designer (BI 7.0).
How can i copy existing restricted key figures ? i can't find anything. i always have to create a new one, and then i have to do all the things like 'details of selection' etc.... manually. that CANNOT be, there MUST be a way to copy those key figures.
any ideas ?
best regards, Martin

Hi Martin,
Restricted key figures can be stored on the infoprovider basis . For which right click on the key figure (left hand side pane ), Select the necessary key figure and assign the restriction through characteristics combination, and give it a restriction and save it . Next tiem when you create query on the same info provider it should appear in the left hand side as readymade reusable piece .
Hope that helps.
Regards
Mr Kapadia

How to build Restricted Key figures in Universe?

Hi All,
I have been trying to find a way to build restricted key figures at BO universe level.
I have gone through the best practices documents and the mdx syntax documents.
Even though building Restricted key figures at universe level is not a recommended approach, we had a requirement to achieve it.
I have tried the below possilbe ways but could succeed only half way.
Please help me and others who has been trying to build the restricted key figures at universe level by guiding us.
Eg: A restricted key figure A1 is based on a basic key figure A, with a restriction on cost element C (detail object,cost element key)
I have built A1 with below syntax and could get correct result in web intelligence report
Select block of A1 measure object in designer
<Expression>@Select(Key figures\A)</Expression>
Where block of A1 measure object in designer
<FILTER KEY="[0COSTELMNT].[LEVEL01].[[20COSTELMNT]].[Value]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="ABCD/1234567"/></CONDITION></FILTER>
But when I build another restricted key figure A2 out of basic key figure A with restriction on the same cost element key field but a different value like ="ABCD/678910".
Both A1 and A2 give correct results individually when they are dragged in a web intelligence query.
But when both of them are required to be dragged in the same query , no result comes because of the conflicting where clauses,as cost element key can't have both values at same time.
Then I tried building A1 in below ways, as mentioned in the mdx examples document
Trial 1:
Select block of A1 measure object in designer
<Expression>(@Select(Key figures\A),[0COSTELMNT].[LEVEL01].[[20COSTELMNT]].[Value].[ABCD/1234567])</Expression>
Trial 2:
Select block of A1 measure object in designer
<Expression>(@Select(Key figures\A),[0COSTELMNT].[ABCD/1234567])</Expression>
Trial 3:
Select block of A1 measure object in designer
<Expression>([Measures].[D787I2PW5YTGMTKL83RWBH80W],[0COSTELMNT].[ABCD/1234567])</Expression>
All the above expressions parse OK at universe level. Trial 1 gives a database error while running the query.
Trial 2 and Trial 3 nither throw any error nor return any result for A1.
If any one has tried and succeeded in implementing restricted key figures at universe level,please provide us some inputs.
Thank You.
Naresh

Hi,
this seems to be identical to this one:
Re: Condition Object for previous month data on current month input
I would suggest you close one of them as two entries asking the same is not a good idea
Ingo

How to make restricted key figure global (There are same topics)

Gurus,
Sorry to post this question again but I was not happy with other topics answers. I am developing a SAP BSC (Balanced Scorecard) version 6.0. In order to generate results I need to use 'Calculated Key Figures' (SAP BSC does not read Restricted ones). No problem so far. However I have a query from the Controlling area of my company where all financial KPIs are restricted in Rows (right side of Bex) instead under 'Restricted Key Figures' area on the left panel. They are not global. It is a lot of them. My option, for while, is to recreated all of them on the left side and than transform them in 'Calculated Key Figures'.
There is other way to 'move' these 'Selection' to make them global on the left side? This would save me two weeks.
Kind Regards,
Gilson Teixeira

Hi,
In Query Designer,in left panel....expand 'KEY FIGURES' tree and rght click on 'Restricted Keyfigures'--->new restricted KF.
regards
MR
Message was edited by: M.R Sashi

How can we restrict users from changing the data in HFM.

Hi All,
We have requirement from users where, They don't want the base data being loaded from SAP to HFM via FDM through ERPi to get changed in HFM at <Entity Currency>. They want data to be read only and no body should be able to change neither Grid nor Forms and neither Smart View. If we restrict by Shared services access then again they can't change ownership management value.
Regards,
Sushil

Hi Thanos, Thanks for your reply.
Yes i am aware of the security class, so your suggestion is to use security classes to restrict users? And how can i use the phased submission for the same? I am new to HFM so please bear with me.
I have one more question that my Application is HFM EPMA application. So is it necessary to have Application Administrator to change hierarchy and Deploy the Application from EPMA?
Thanks,
Sushil

How can I move two figures on the stage with remote shared object?

Hi, I have a problem...
I need to move two figures on the stage with shared object like the "Tutorial shared Object ball" on the adobe website but with more than one figure. All the client must see the figures moving. The figure are a circle (Cerchio) and a square (Quadrato).
Help me, please. This is the script:
package
import flash.display.Sprite;
import flash.net.SharedObject;
import flash.events.NetStatusEvent;
import flash.events.SyncEvent;
import flash.net.NetConnection;
import flash.events.MouseEvent;
import flash.display.MovieClip
//import flash.net.ObjectEncoding;
public class BlocchiLogici extends Sprite
 private var pointer_so:SharedObject;
 private var pointer1_so:SharedObject;
 private var nc:NetConnection;
 private var good:Boolean;
 private var Cerchio:cerchio;
 private var Quadrato:quadrato;
 private var Rettangolo:rettangolo;
 private var Triangolo:triangolo;
 public function BlocchiLogici()
 //NetConnection.defaultObjectEncoding=flash.net.ObjectEncoding.AMF0;
 //Connect
 var rtmpNow:String="rtmp://192.168.1.66/BlocchiLogici";
 nc=new NetConnection ;
 nc.connect (rtmpNow);
 nc.addEventListener (NetStatusEvent.NET_STATUS,doSO);
 Cerchio=new cerchio ;
 addChild (Cerchio);
 Cerchio.x=50;
 Cerchio.y=200;
 Cerchio.addEventListener (MouseEvent.MOUSE_DOWN,beginDrag);
 Cerchio.addEventListener (MouseEvent.MOUSE_UP,endDrag);
 Quadrato=new quadrato ;
 addChild (Quadrato);
 Quadrato.x=100;
 Quadrato.y=200;
 Quadrato.addEventListener (MouseEvent.MOUSE_DOWN,beginDrag);
 Quadrato.addEventListener (MouseEvent.MOUSE_UP,endDrag);
 private function doSO (e:NetStatusEvent):void
 good=e.info.code == "NetConnection.Connect.Success";
 if (good)
 //Shared object
 pointer_so=SharedObject.getRemote("point",nc.uri,false);
 pointer_so.connect (nc);
 pointer_so.addEventListener (SyncEvent.SYNC,doUpdate);
 private function doUpdate (se:SyncEvent):void
 for (var cl:uint; cl < se.changeList.length; cl++)
 trace(se.changeList[cl].code);
 if (se.changeList[cl].code == "change")
 if (Cerchio)
 switch (se.changeList[cl].name)
 case "xpos" :
 Cerchio.x=pointer_so.data.xpos;
 break;
 case "ypos" :
 Cerchio.y=pointer_so.data.ypos;
 break;
 else if (Quadrato)
 switch (se.changeList[cl].name)
 case "xpos" :
 Quadrato.x=pointer_so.data.xpos;
 break;
 case "ypos" :
 Quadrato.y=pointer_so.data.ypos;
 break;
 private function beginDrag (e:MouseEvent)
 if (Cerchio)
 Cerchio.addEventListener (MouseEvent.MOUSE_MOVE,moveMc);
 Cerchio.startDrag ();
 else if (Quadrato)
 Quadrato.addEventListener (MouseEvent.MOUSE_MOVE,moveMc);
 Quadrato.startDrag ();
 private function endDrag (e:MouseEvent)
 if (Cerchio)
 Cerchio.stopDrag ();
 else if (Quadrato)
 Quadrato.stopDrag ();
 private function moveMc (e:MouseEvent)
 e.updateAfterEvent ();
 if (Cerchio)
 pointer_so.setProperty ("xpos",Cerchio.x);
 pointer_so.setProperty ("ypos",Cerchio.y);
 else if (Quadrato)
 pointer_so.setProperty ("xpos",Quadrato.x);
 pointer_so.setProperty ("ypos",Quadrato.y);
I need of a server side file?
Thanks.

I solved it!!
I duplicated the script....
It's work perfectly..
Emiliano.

How can i use key figure in rows

Dear all
I had a keyfigure Total delivery date in days how can i use this field in row.

hi
Create a structure and add this keyfigure to it in Row, But if you do this you dont have keyfigures in Columns..
Hope this helps...
Dev

Can we restrict Key Figures in "Distribute with reference data"?

Hi,
I'm using "distribute with reference data" function & I wanted to distribute only 1 Keyfigure & the 2nd keyfigure shouldn't be distributed but remain same for each record.
So, I restricted function with only 1st keyfigure & when I look at the distributed data, function distributed correctly but 2nd keyfigure was blank.
Let's say I've following data.
MATERIAL SGRP QTY PRC
=====================
MATERIL1 0000 100 23
where SGRP is "Sales Group" & QTY is "Quantity" & PRC is "price"
I am interested in distributing only Quantity but not the price.
After distribution, this is what I can see...
MATERIAL SGRP QTY PRC
=====================
MATERIL1 SGP1 050 000
MATERIL1 SGP2 050 000
MATERIL1 0000 000 23
But, I'm expecting the following...
MATERIAL SGRP QTY PRC
=====================
MATERIL1 SGP1 050 23
MATERIL1 SGP2 050 23
Appreciate any ideas.

Hi Mary,
Thank you very much for your reply.
after the distribution funciton, let's say, i've following data.
MATERIAL SGRP QTY PRC
=====================
MATERIL1 SGP1 050 000
MATERIL1 SGP2 050 000
MATERIL1 0000 000 23
I created 1 more distribution by keys funciton & included this in a planning sequence along with 1st distribution function.
But, it's not helping my needs. I tried with all 3 functions, "Distribute by Key", "Distribute according to keys" & "Distribute by keys from sender to reciever".
As Sales Group is different after the 1st distribution funciton, qunatity records are not falling in the same set of data as price records for the 2nd "distribution by keys" funciton.
if i don't include Sales Group in "fields to be changed" of the above 3 "distribution by key" functions,
function is taking 2 sets of data with set1 contains 1st 2 records(records with quantity & "with SGRP1 & SGRP2") & set2 contains 3rd record (record with price & with SGRP 0000).
As they are not falling within same set of data, above 3 functions are not working for me.
If i include Sales Group in the "fields to be changed", I'll have to specify a value which incase is dynamic & varies for each material.
hope am clear & appreciate if you have any other ideas.

How to define restricted key figure in IR

Hi Friends,
I have a senario where I need to display current month data and the previous month data.
Eg:
Suppose 5th month sal is 5000/-
Now I need to display 4th month salary also ,Kidly let me know hw can i caluclate 4th month salary.
Thanks,
Guna

Not sure what your problem is?
is this a Query Problem, a Caclultion Problem or Presenting Data problem?
Do you have Data for the prior/4th Month?

How can I run different commands in the same system exec window?

I want to open a window (cygwin) on my Xp machine and sent commands within that window. I then have to monitor what the responses are coming back into the window that was launched. Any ideas on how to do this? I have been playing with the system exec VI but can't seem to get it to do what I want. Any help would be appreciated. Thanks - Troy

Hello,
Have you tried setting the wait until completion to true on the System Exec VI? If so, the LabVIEW documentation claims that the parameter "standard output returns information from the program you called if wait until completion is TRUE. If wait until completion is FALSE, System Exec returns an empty string."
Could this be the answer to the problem of getting the data returned?
I hope this helps!
Best Regards,
JLS
Best,
JLS
Sixclear

How To Transport a Restricted Key Figures

Dear all,
can u plz tell me how to transport Restricted key figures for the first time.
i mean shall i create new package or shall i use the existing package only?
Regards
venu

Dear Venkat,
In qaulity the sales value for a week is showing correctly where as in the production the sales value is showing only for one material that to in the -ve...we have so many materials....
When i open a Query Designer in quality the system is giving a status message
[E865(RSO)]ERRORS: System is not set to Changeable - objects are not changeable
[b]When i click the documetaion on the error message the following is appearing:
Errors: System is not set to changeable - objects are not changeable [E865(RSO)]
Diagnosis
You want to change objects although the system setting is "Not Changeable".
System Response
The objects cannot be changed.
Procedure
Change the setting for the system or client to "changeable". You can do this using transaction SE06 or SCC4.
Venu

How to show filter values of restricted key figures in BEx Analyzer?

Hi,
I have following report.
                     Quantity USA        Quantity China
Product           100                        150
Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
E.g.:
Country          USA
                     Quantity USA
Product           100
If I put both restricted key figures in the query, this line is not shown.
Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
Thanks!
Regards,
Pascal

Hi,
I have following report.
                     Quantity USA        Quantity China
Product           100                        150
Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
E.g.:
Country          USA
                     Quantity USA
Product           100
If I put both restricted key figures in the query, this line is not shown.
Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
Thanks!
Regards,
Pascal

Can't change a Restricted Key Figure technical name in QD BEx 7.1.0

A few days ago I created a new Restricted Key Figure in Query Designer and it was autopopulated with a default technical name. So I immediately changed it to 'ZRNPVORDINTFACTPPP_FY'.
Now, today, I realized that the 'F' in the technical name is a typographical error and I need to remove it. I clicked the Restricted Key Figure on the left from within the list and clicked the Change/Display pencil icon in the properties window, but the Technical Name field is still greyed out. Also tried right clicking and selecting Edit, but same problem.
Would removing all instances of where the figure is used in the query and other queries allow me to change it? Could it be a user rights issue?
As always, thanks for the help!

Hi,
After creating a RKF , you cannot change its technical name.
If the RKF has a lot of restrictions and creation of another similar RKF is a big process ,
you can create a copy of the same through transaction RSZC.
In RSZC , give the source and target cube name as the name of the multiprovider on which your query is built,
select restricted keyfigure ,click on execute , in the list which comes after execute find your KF 'ZRNPVORDINTFACTPPP_FY'
and click on transfer/copy option available.Change the technical name as you want and then click on execute. A similar keyfigure with the desired technical name will be created in query designer ,global keyfigures .
Replace the same with your Old keyfigure in report.

How can we restrict Key Figure in the BI System

Similar Messages

Maybe you are looking for