How can we restrict the sub-screen input field for particluar country?

Hi all i am having infotype 21 maintained with custom fields for sub-screen 200.
Out of that custom fields(City , District) They restricted city field not to appear for australian employees.
and district is sucesfully appearing .
They have written logic in the sub-screen 200 in PBO.this is reflecting in alll sub-types of 21(alomst 20 subtypes)
module abc_output.
If T001P-MOLGA = 'australia'.
if screen name = 'city'.
screen-input = 'OFF'.
screen-invisible = 'ON'.
endif.
endif.
Now the requirement is that this logic should be modified such that this city should appear in 7 sub-type instead of district.
what should be written can any one guide please .
regards
sas

Hi we can do in this way.
If T001P-MOLGA = 'australia'
if p00021-subty ne '7'.
if screen name = 'city'.
screen-input = 'OFF'.
screen-invisible = 'ON'.
endif.
endif.
if p0021-subty = '7'.
if screen name = 'district'.
screen-input = 'OFF'.
endif.
endif.
Thanks and closing the thread
regards
sas

Similar Messages

How can I make the lock screen stay active for longer than 5 seconds?

I'd like to have the lock screen stay active for longer than 5 seconds. Too many times I've not seen a notification come through. I'd like to have it stay on for at least 5 minutes for shutting down. I'm suprised a "lock screen delay" option isn't a general setting available to unjailbreaked phones.

Sorry, no.
Tell Apple you'd like a setting to alter this:
http://www.apple.com/feedback/iphone.html

How can i change the cracked screen of iphone6 in a country which has no apple store?

Just one time fallen... Totally craked, but the touch function is still available.
I bought this IPHONE6 from online store of the apple official website, and this country Im living in which has no real APPLE store, so where should I go to replace the broke screen.
By the way, I'm in UAE.
Thank you if anyone can help me~

Lotam wrote:
Thank you !
I've contacted the apple service provider by the site you gave me in your reply.
But now the problem is that they don't offer any repair services for the screen cracked iphone6, they just provide the service of replace a new device with extra 1300+ AED I need to pay because I don't have the APPLECARE SERVICE.
I thought the price is not very reasonable in consideration of I just payed 2599 AED to buy it.
Is there any way to buy the APPLECARE SERVICE right now?
You're being offered a replacement device for half the price of the original, even though it was totally your fault, and no one else's, that it got damaged... and you think this is unfair?
Most companies don't even offer that. If you have a non-functioning device that isn't covered under some form of warranty or protection plan, you normal buy a mother device, at full price.
You're getting a 50% discount. What, exactly, is unreasonable about this?

How i can show the selection screen input field in the top of page in alv

hi ,
          how i can show the selection screen input field in the top of page in alv grid output.
tell me the process

Hi,
excample from my program:
FORM topof_page.
DATA: l_it_header   TYPE TABLE OF slis_listheader WITH HEADER LINE,
        l_info        LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
    if not &1 is initial.
      clear l_it_header.
      l_it_header-typ   = 'S'.
      l_key = '&1'.
      translate l_key to upper case.
      read table l_it_textpool with key key = l_key.
      if sy-subrc = 0.
        shift l_it_textpool-entry left deleting leading space.
        l_it_header-key = l_it_textpool-entry .
      endif.
      loop at &1.
        case &1-option.
          when 'EQ'
            or 'BT'
            or 'CP'.
            write &1-low to l_it_header-info.
          when others.
            write &1-low to l_it_header-info.
            concatenate &1-option
                        l_it_header-info
                   into l_it_header-info
                   separated by space.
        endcase.
        if not &1-high is initial.
          write &1-high to l_info left-justified.
          concatenate l_it_header-info
                      l_info
                 into l_it_header-info
                 separated by space.
        endif.
        if &1-sign = 'E'.
          concatenate ']'
                      l_it_header-info
                 into l_it_header-info.
        endif.
        append l_it_header.
        clear: l_it_header-key,
               l_it_header-info.
      endloop.
    endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
             s_trmext,
             s_trmint,
             s_fkdat,
             s_delno,
             s_vbeln,
             s_deact,
             s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole

How can i restrict the Expenditure Type values at a specific OU ?

Dear Guys,
I would like to ask about the Expenditure Types,
I have implemented two projects for different Operating Units ,
when navigating to any Projects responsibilty,and navigating the Expenditure Type field
the values exist are all the values implemented across the OU not the values entered at this OU
How can i restrict the Expenditure Type values at a specific OU
Regards
Amr Hussien

Hello
When you set up a project there is an option called Transaction Control.
This option allow you to list the allowed or restricted elements of costs for the project.
You may enter the transaction control on a project template and that will be copied to any new project.
The cost elements may be expenditure types, expenditures categories, suppliers, employees, etc.
In your case, I suggest to set up specific project templates for each operating units. On each template enter the list of allowed expenditures types for that OU.
Doing so, the system restricts users from entering any expenditure item, supplier invoice, purchase cost etc, against an expenditure type, which is not allowed.
Dina

How can I remove the lock screen from my iphone5s

how can i remove the lock screen from my iphone5s. Please help.

JModi wrote:
I want to get home screen as soon as I click the top lock screen button.
The "lock screen button" locks the phone. It will not take you back to the home screen. Thus the difference in the nomenclature for the "HOME" button and the "LOCK" button...

How can i restrict the qty/value at the time of invoice

Hi,
Can you plesae tell me at the time of MIRO how can i restrict the user not to enter the qty more than in MIGO & PO
Thanx

You cannot restrict the qty in MIRO. because it is used for partial invoice receipt.
E.g in some cases 100 nos of qty might have received in one GR. But the supplier may give 3 invoices for this. that is the reason u cant restict this
reward if useful
SK

How can I restrict the total no. of recs. per physical page

Hi !
I have created a report and I am saving that in a text file. The
problem is that when I try to take the output on the printer
then the total no of records overflows to the next pages and the
next page heading comes much below to it's designated place.
Max.no of records property in the repaeting frame is for the
logical page.
How can I restrict the max. number of records per physical page ?
Any pointer will be welcome,
Thanks in advance,
Shobhit
null

Just for fun (and in case this wasn't done to death in the other thread), the rule posted here states:
Most years have 365 days, but a leap year has 366 days. That adds up to 52 weeks (where each week is exactly 7 days) PLUS 1 or 2 additional days. The year 2012 has exactly 366 days.Now if the year starts on a Sunday in a non-leap year, you end up with 53 Sundays. Or if either of the first two days lands on a Sunday during a leap year, then you can also get 53 Sundays.>
which allows a calculation like this:
with test_data as
     ( select rownum + 1999 as test_year from dual
       connect by rownum <= 15 )
select test_year
     , case
          when first_day = 'SUN'
          or ( first_day = 'SAT' and leap_year = 'Y' )
             then 53
          else 52
       end as sundays
from   ( select test_year
              , to_char(to_date(d.test_year||'-01-01','YYYY-MM-DD'),'DY', 'NLS_DATE_LANGUAGE=ENGLISH') first_day
              , case extract(day from last_day(to_date(d.test_year||'-02','YYYY-MM'))) when 29 then 'Y' else 'N' end as leap_year
         from   test_data d );
TEST_YEAR    SUNDAYS
      2000         53
      2001         52
      2002         52
      2003         52
      2004         52
      2005         52
      2006         53
      2007         52
      2008         52
      2009         52
      2010         52
      2011         52
      2012         53
      2013         52
      2014         52
15 rows selected.

How can i remove the bar (where i search for websites) when i full screen for my macbook pro

how can i remove the bar (where i search for websites) when i full screen

ohhh k i got it but thats not what i am looking for, so when i full screen i want it to be like fully full screen like when i watch a movie i want nothing but the movie on the screen and when i bring the mouse up then the tab shows again thats what exactly I'm asking about.

How can I restrict the usage of a iPhone 5c? I would only like my daughter to be able to use her phone between 7am and 10pm central. Any ideas how to do this or an app to use?

How can I restrict the usage of a iPhone 5c? I would only like my daughter to be able to use her phone between 7am and 10pm central. Any ideas how to do this or an app to use?

Hi! i believe there is no preinstalled app than can do that for you, however you can use a third party software, such as this: http://www.bitworks-engineering.co.uk/Apps/TimeLock_App/Welcome.html or this https://itunes.apple.com/us/app/parental-timelock-time-limit/id689577280?mt=8

How can i restrict the selecting file type to XML and TXT in file upload..

Hi,
I am using Struts Upload Bean. I am also using html:file tag in the JSP. Now when i click on the browse button, A file dialogue window appears. The problem id the i want to show only text and xml files in the dialog box. Now the files of type combo box in the dialogue box is showing *.*, *.html, *.pictures (jpg/gif) options. In place of this i need to show only txt and xml files. How can i restrict the file type to XML and TXT
Regards,
Sudheesh...

Hi,
the demo doesn't keep track of this. If you want then this feature isn't implemented. You will also see that the document is uploaded in a directory without changing the file name (e.g. adding the SR number). This however can be done and would be the way to do it
Frank

How Can I Restrict the times my BT Homehub 2.0 is ...

How Can I Restrict the times my BT Homehub 2.0 is used?
i want to make sure that the kids dont go back online on their wireless laptops after i have gone to bed!!!
how can i restrict the useage times (say 11am - 11pm) for the hub/individual users - WITHOUT taking the plug out when I go to bed!!!
thanks in advance
Paul

belial wrote:
@meaga-byte: the second of those two options can be achieved by using the "BT Powersave" function. This does mean that *everyone* will lose wifi accessibility, so no watching iPlayer be for _you_ drift off! PowerSave will turn all your wifi off and back on between particular times.
This seems a more user friendly option for thoes who are not ofay with IP addresses etc.
Unless Paul wants to use wifi while in bed
If I've helped, just click the Star - Every little bit helps
If you can't fix it with a hammer, you've got an electrical problem.

How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?

How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?

It depends, but it could either be the Grid or Pixel Grid under View>Show.

How to restrict the length of input field

Hi,
How to restrict the length of input field. That is we should not be able to enter more thatn 10 charecters.
Regards,
H.V.Swathi

Hi swathi,
For this you have to create a simple data type. No need of writing a code.
Go to Dictionaries -> Local Dictionary -> Data Type - > Simple Type - > Right click and "Create Simple Type".
Here you should create a Simple type with String as built-in Type. Here you will also see the Length Constraints option.
Set the value of maximum length and minimum length. In your case set the value of maximum length to 10. At runtime this will not allow the user to enter more than 10 characters.
Now create an attribute and bind it to this newly created simple type. Bind the value of the input field with this particular attribute.
Regards
Manohar

How can we restrict the objects..?

Hi it was a question asked in an interview.
How can we restrict the object..?
is it with RSSM and PFCG settings..?
Correct me if I am wrong..!
Cheers,
Vasu

hi Vasu,
if the question is restriction in reporting by authorization, then you are right. take a look some bw authorization docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/adeac294-0501-0010-5a97-9ac5d562b1be
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/39f29890-0201-0010-1197-f0ed3a0d279f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a6329790-0201-0010-b4a1-fdd384045fdb
hope this helps.

How can we restrict the sub-screen input field for particluar country?

Similar Messages

Maybe you are looking for