How can we restrict the user to a desired "Member access profile" ?

Dear Gurus,
In BPC 7.0 my "Team" has 4 "member access profiles" and a user is assigned to that team.
Can that user have access to just one member access profile ??
If he can, how do I set it up in BPC 7.0 ?
NB: I read somewhere that I should not asign "member access profiles" to users directly. Hence I wanted to do it through "Team"
-Venkat

Vijaya,
Sorry, but your answer didn't make any sense to me.
Here all the 4 member access profiles are different. i.e. they all are restricted with a different dimension member. So, if I assign each of these 'member access profiles' directly to the user, my requirement is met.
But my question is: how do my "user" pick the required member access profile from a TEAM which has all 4 member access profiles ?
SAP suggested NOT to assign users directly to member access profiles. Instead it suggested to assign "teams" to member access profiles and assign user to the "teams"

Similar Messages

How can we restrict the users/planners for a planning book?

Hi experts,
How can we restrict the users/planners for a planning book?
Thanks,
Naga.

Hi Naga,
we describe this in our SAP Demand and Supply Network Planning rapid-deployment solution.
Access this area directly via
http://service.sap.com
/rds-dpa
In the configuration guide Demand Planning Settings, Macros and Chart
Engine (DP3) read Appendix: Setting up Roles and
Authorizations.
BR Frank

How can I restrict the user to run the report based the access level at access table backend?

I have a report which pulls data of servicetickets. Now I have to work on security part which should retrict the people to look for specif sales team tickets based on their access at backend. They should access the tickets of the sales teams which they have
access. Can anyone help on this.
Thanks,
Swapna

Getting error as
Msg 536, Level 16, State 2, Line 7
Invalid length parameter passed to the RIGHT function.
and
(Tut.AdloginID
= RIGHT(@ReportUser,
PATINDEX('%\%',
REVERSE(@ReportUser))
-1)
OR
EXISTS (
SELECT *
FROM dbo.TicketingUserTeams Tut
WHERE Tut.Team
= 'Ticketing Admin'
AND Tut.AdloginID
= RIGHT(@ReportUser,
PATINDEX('%\%',
REVERSE(@ReportUser))
-1)
Swapna

How can i restrict the qty/value at the time of invoice

Hi,
Can you plesae tell me at the time of MIRO how can i restrict the user not to enter the qty more than in MIGO & PO
Thanx

You cannot restrict the qty in MIRO. because it is used for partial invoice receipt.
E.g in some cases 100 nos of qty might have received in one GR. But the supplier may give 3 invoices for this. that is the reason u cant restict this
reward if useful
SK

How can we restrict the other user to add their user id's to the user group created in SQ03?

Hello All,
How can we restrict the other user to add their user id's to the user group created in SQ03?
When we enter the user group name and click on "Assign users and Infosets" button in the attached pic "User Group" .
I was able to enter my user id in other user groups. How to Grey out the other rows in the attached pic "User Group 1".

How strange I answered (or at least helped) this very same question earlier today. Here the link to my previous answer then:
http://scn.sap.com/thread/3536135

How can i restrict the Expenditure Type values at a specific OU ?

Dear Guys,
I would like to ask about the Expenditure Types,
I have implemented two projects for different Operating Units ,
when navigating to any Projects responsibilty,and navigating the Expenditure Type field
the values exist are all the values implemented across the OU not the values entered at this OU
How can i restrict the Expenditure Type values at a specific OU
Regards
Amr Hussien

Hello
When you set up a project there is an option called Transaction Control.
This option allow you to list the allowed or restricted elements of costs for the project.
You may enter the transaction control on a project template and that will be copied to any new project.
The cost elements may be expenditure types, expenditures categories, suppliers, employees, etc.
In your case, I suggest to set up specific project templates for each operating units. On each template enter the list of allowed expenditures types for that OU.
Doing so, the system restricts users from entering any expenditure item, supplier invoice, purchase cost etc, against an expenditure type, which is not allowed.
Dina

How can i restrict a user not open more than 3 sessions in database

how can i restrict a user not open more than 3 sessions in database.For this i have already create a profile and set CONCURRENT_SESSIONS=3 and assing that profile to user but the problem is there.

You will simply need to use the following parameter in your CREATE PROFILE syntax.
CREATE PROFILE normal_user
LIMIT SESSIONS_PER_USER 2;
but the resource limits set for a profile are enforced only when you enable resource limitation for the associated database.
you could do this either by having an initialization paramater which will invoke as soon as the database starts or try using ALTER SYSTEM command

How Can I Restrict the times my BT Homehub 2.0 is ...

How Can I Restrict the times my BT Homehub 2.0 is used?
i want to make sure that the kids dont go back online on their wireless laptops after i have gone to bed!!!
how can i restrict the useage times (say 11am - 11pm) for the hub/individual users - WITHOUT taking the plug out when I go to bed!!!
thanks in advance
Paul

belial wrote:
@meaga-byte: the second of those two options can be achieved by using the "BT Powersave" function. This does mean that *everyone* will lose wifi accessibility, so no watching iPlayer be for _you_ drift off! PowerSave will turn all your wifi off and back on between particular times.
This seems a more user friendly option for thoes who are not ofay with IP addresses etc.
Unless Paul wants to use wifi while in bed
If I've helped, just click the Star - Every little bit helps
If you can't fix it with a hammer, you've got an electrical problem.

How can we restrict the absence status (Which are not yet to be approved)in team calendar(MSS)

How can we restrict the absence status (Which are not yet to be approved)in team calendar(MSS)

Hi user570596,
I think there is no method to actually restrict the date picker popup, but you can use the ApexLib Framework (http://apexlib.sourceforge.net/) to define a min/max value for your date field. This will prevent the user from submitting the page when the date value is outside the defined range.
See http://inside-apex.blogspot.com/2007/03/min-max-value-validation-in-browser.html
for details.
Patrick
Check out my APEX-blog: http://inside-apex.blogspot.com
Check out the ApexLib Framework: http://apexlib.sourceforge.net

HT201342 How can I change the USER of my i-cloud address? My 12 year old set up the e-mail account and used a silly user name (like: turtle!!). I would like to have an icloud e-mail account but under my own user name. The other /old name can be deleted?

How can I change the USER name of my i-cloud e-mail account? It was set up by my son and he used a silly / embarrassing user name. I would like to change this name OR set up another i-cloud e-mail account under my own name / reference. Help?

iCloud email addresses can't be changed or deleted, but you can set up an alias namethat he can use which will be linked to his current iCloud account and will receive email in the existing iCould inbox. This guide explains how: http://support.apple.com/kb/PH2622.

How can I restrain the user login portal once, in the same time ???

Hi
I need to restrain the user can't repeat to login portal ....
to reduce portal loading
How can I restrain the user login portal once, in the same time???
Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
tks

Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
- Jim

The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

Thanks a lot for the response. Yes, I am checking my C: drive data thoroughly now, including the hidden folders, to ascertain if something else can be moved, as per your suggestion.

How can i receive the user name of the present operating system

HI,all.
how can i receive the user name of the present operating system from SAP.Have any funciton to use?Thankyou!

use sy-uname system field.
report ztest.
write:sy-uname.
thanks.
reward if solved.

How can I restrict the total no. of recs. per physical page

Hi !
I have created a report and I am saving that in a text file. The
problem is that when I try to take the output on the printer
then the total no of records overflows to the next pages and the
next page heading comes much below to it's designated place.
Max.no of records property in the repaeting frame is for the
logical page.
How can I restrict the max. number of records per physical page ?
Any pointer will be welcome,
Thanks in advance,
Shobhit
null

Just for fun (and in case this wasn't done to death in the other thread), the rule posted here states:
Most years have 365 days, but a leap year has 366 days. That adds up to 52 weeks (where each week is exactly 7 days) PLUS 1 or 2 additional days. The year 2012 has exactly 366 days.Now if the year starts on a Sunday in a non-leap year, you end up with 53 Sundays. Or if either of the first two days lands on a Sunday during a leap year, then you can also get 53 Sundays.>
which allows a calculation like this:
with test_data as
     ( select rownum + 1999 as test_year from dual
       connect by rownum <= 15 )
select test_year
     , case
          when first_day = 'SUN'
          or ( first_day = 'SAT' and leap_year = 'Y' )
             then 53
          else 52
       end as sundays
from   ( select test_year
              , to_char(to_date(d.test_year||'-01-01','YYYY-MM-DD'),'DY', 'NLS_DATE_LANGUAGE=ENGLISH') first_day
              , case extract(day from last_day(to_date(d.test_year||'-02','YYYY-MM'))) when 29 then 'Y' else 'N' end as leap_year
         from   test_data d );
TEST_YEAR    SUNDAYS
      2000         53
      2001         52
      2002         52
      2003         52
      2004         52
      2005         52
      2006         53
      2007         52
      2008         52
      2009         52
      2010         52
      2011         52
      2012         53
      2013         52
      2014         52
15 rows selected.

How can i change the user that open the rfc connection (sm58) from R/3?

Hi all,
i'd like to know how can i customize the user 'connecting' R/3 and BW, i mean: when i launch a data extraction a fixed user creates the rfc connection to BW (and i can see it from tcode sm58 in r/3), i need to use a different username so that it will come be more easy for me to reorganize the rfc queue in case of errors (we are doing some testing), it's possible to do something like this or everyone has to share the same user r/3 side?
I hope i've been clear...
thanks for the help
S.

Hi...
Its recommended that only one user executes the RFC because you must manage the authorizations for remote execution only with few users....in case on error you can send the user as a parameter of the RFC and you can buid the error message with this parameter and identify the user of execution...
I hope this helps you
Regards

How can we restrict the user to a desired "Member access profile" ?

Similar Messages

Maybe you are looking for