How can we set a process chain to trigger the nodes w/o manual intervention

SDNers,
We have a Master PC which has the loading & activation of some Hierarchies.Wats happening is some of the hier activations are failing (we got track of the root cause as well) and the nodes below are not getting triggered automatically, eventhough they have been designed to get triggered irrespective of success or failure of this hierarchy activation. The chain prompts for the u2018Status change & trigger the following eventsu2019 opo-up and only when it was said u2018yesu2019, the subsequent node gets triggered in the chain. If this manual intervention was not there, the Chain gets struck at the activation node, whic is running in yellow status for long, though a short dump - error has already been thrown.
My query is how can we set a process chain not to anticipate the manual intervention of chnaging the status & trigger events pop-up

Hi ravi,
i'm not sure abt the query but what i got thru ur qustion is u have to automtaically go to the next load/step even the proceess chain fails in the step......
for that we have the same master meta chains with link of so many local chains...for this even if there are some interventions/fails in between the process chains it never gets stopped....
it goes to the next step and we'll work, analyse and finish the failed load manually....the next day it'll be
fine...
b4 to this make sure that there is no dependency for the previous loads....
And now the solution i found for this is in the process chain design itself.......
while giving the links itself we'll be getting the options as status RED,GREEN and RED(or)GREEN.....now if u got for the third option the event goes to the next step even it is unsuceesful....
rgds,
nkr.

Similar Messages

How can we delete a process chain?

Dear Ones,
By Mistake I have converted an infopackage group into process chain in Quality system. How can we delete a process chain?
Thanks,
Raj

Hi Bhanu,
I've doubt that what is the difference between cancel with core and cancel without core with respect to process chain.
Could you please advice how do we start a process chain daily without using the schedular window for transaction data.
Thanks in advance...
Amarnath.

I bought a used ipad on ebay and the icloud acct is still linked to the old owner who doesn't remember the acct information. How can I set up my apple id on the iPad.

I bought a used ipad on ebay and the icloud acct is still linked to the old owner who doesn't remember the acct information. How can I set up my apple id on the iPad?

You will need the previous owner's Apple ID and Password to:
1. Turn off Find My iPhone
2. Erase device
3. Reactivate device

How can I set up an email signature in the Nokia 822

How can I set up an email signature in the Nokia 822?

Great question, Robobenn! Here is how to add the signature:
From the Start screen, tap the Mail tile.
Tap the More icon.
Tap settings.
To enable, tap the Signature on/off switch.
Scroll to, then tap the Signature field.
Enter the desired signature, then tap the Checked icon.
For additional support, go to: vzw.com/support
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

How can i set up my macbook pro that the sent emails show up in the sent folder?

How can i set up my macbook pro that the sent emails show up in the sent folder?

look at the Preferences and open the "Mailbox Behavior" maybe the sent mail is being stored on the server?
I going to have this post moved to the "Mail" forum

HT4623 How can u set up your iphone when all the files are deleted?

How can I set up my iphone if all the files are deleted?

What files are deleted?
Please explain

I recently upgraded my iphone 4 to a iphone5 and everytime i take pictures etc they store on the old phone as well as the new on iloud, how can I set up a new icloud on the old phone for my mum whos now using it without losing everything that was ? thanks

i recently bought a new iphone 5 and gave the old iphone 4 to my mum. every time i take picstures they automatically store on the iphone 4, how can i set up a new icloud for my mum on the iphone 4 but keep everything on my iphone 5?

Your iphone 4 must still be logged into your icloud account. Go to settings>icloud, scroll to bottom of page and tap Delete Account. This will remove all your data from the old device but not from icloud or your iphone 5.
To create a new icloud account for your mum, go to
http://www.apple.com/icloud/setup/

How can I set Firefox to print to PDF, the only otions I have are (1) My Canon printer, (2) Fax or (3) Microsoft XPS document writer. There is no option for PDF

A couple of weeks ago, from the file menu, in my print options was to print a web page to PDF, that facility is no longer there. does anyone know how can I set Firefox to print to PDF.
The only options I have are (1) My Canon printer, (2) Fax or (3) Microsoft XPS document writer. There is no option for PDF

Firefox generally displays the printers in Windows' Printers folder (Start orb > Devices and Printers). If it is missing one of the printers listed there, could you indicate which one it is, for example, Adobe Distiller, PrimoPDF, CutePDF Writer, etc.?
If you previously had an add-on which added print-to-PDF functionality just to Firefox, perhaps it got disabled. You could check here:
orange Firefox button ''or'' classic Tools menu > Add-ons > Extensions
Also, are you really running Firefox 8.0.1? That version from last November is no longer secure and has been superseded by Firefox 11. If you browse the web widely, you should update for your security.

How to create infopackage groups & Process chains & what is the difference

Hi gurus,
please help me to create infopackage groups & Process chains & what is the difference.
please explain any realtime scenerios.
when will we choose infopackage groups & process chains
and what is the difference betweeen these two.
Thanks & Regards,
BWcheta

Cheta,
You can create the IPG with the selction of all infopackages in RSA1-Modelling Area to automate those loads automatically. That means it will trigger only those IP's which have been pooled up in that IGP...
Where as Process chain is also a automated process where you can have different process types which can be used during the load and after the load has been done.. For example in ODS once after the data has been loaded if you want to activate the data then in PC youo can insert the process type for that, but in case of IGP it will only execute your IP.
Hope it helps...
******Assign Points*******
Thanks,
Gattu.

How can I set up my time capsule as the primary base station with a centurylink router? I'm trying to extend my coverage, increase signal strength, and be able to connect a printer.

I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?

The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
Is your broadband cable or adsl or fibre or ???
If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
Setup the TC in DHCP and NAT mode.. (depending on broadband type).
You must reset the TC to factory to do the setup.. no files are lost at all.
Here is my current recommended setup.. with Yosemite life has become harder than ever.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Here is why Yosemite has fundamental issues.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

How can I set up a delayed analog trigger on PCI 6115 DAQ

I have an S-Series PCI 6115 DAQ which I’m running with Labview. I’m using it to measure signals from an acoustic emission sensor and two force transducers. I’d like to set up a delayed analog trigger which will start acquisition on all three channels a period of time after a selected channel’s voltage exceeds a threshold.
Currently I’m using the AI Config VI in line with the AI Start VI and AI Read VI to capture data after a analog hardware trigger occurs. A software trigger probably wouldn't work because I have to sample my data at 10MS/sec. My setup works fine for triggering without any delay or skip counts. However, if I set the delay or skip count in the additional trigger parameter field of the AI start VI, there is no effect, and the device still starts capturing data immediately after the trigger is received. What is the cause of this, and how can I get around it?
Also, is it possible to sample the channels of a PCI-6115 DAQ at different rates? Right now, I’m sampling all my channels at 10MS/sec and throwing away data on all channels except one. However, this seems relatively slow and eventually I would like to attempt pseudo-real time control using my data.

rpursley8 is right about needing to get the counters involved if you want a hardware timed delay in your application.
Concerning whether or not you can sample at different rate, check this document out.
Sampling Different Channels at Different Rates with NI-DAQmx
Otis
Training and Certification
Product Support Engineer
National Instruments

How can I set an event that occurs on the same day, not date, every month? Like Thanksgiving is on the third Thursday of November

On my PowerBook, I was able to set up events to show up on a specific day repeating each month, say the first Thursday. How can I get that on the iPad 2?

For your repeating even, I'm assuming this is your Yahoo calendar? that isn't a Firefox issue, I suggest you try to contact yahoo.
For the other issue, try the following:
Update to Firefox 15. Then, [[Reset Firefox – easily fix most problems]]

I have created a newsletter in indesign cs4 how can I set zooms for each article for the user

I have created a e-newsletter in Indesign. I have successfuly saved it as a SWF then as a PDF from acrobat.
The problem is that when the user zooms in the resolution is not good.
How can I let the user zoom in to read each article. Would I create buttons with zoom settings for each article. If this is the case do I do it in Indesign or Flash and can I still save it as a PDF file and it will keep the interactivity?
I would greatly appreciate any help with this issue. It is driving me mad trying to get the information I need.
Thank you

Hi Bob
Dont know what you mean by deleting my signature in the forum. Sorry its my
first time using a forum.
So just to confirm if I want a user to zoom in on an article I can't do it
in Indesign or Flash.
cheers
PAMELA
                                                                                BobLevine
             <[email protected]
             >                                                          To
                                       pamela hettrick
             17/08/2010 14:09          <[email protected]>
                                                                        cc
Please respond to                                     Subject
             clearspace-143433         I have created a
             1873-767197-2-305         newsletter in indesign cs4 how can
             [email protected].         I set zooms for each article for
                 adobe.com             the user
You don't. There are third party solutions available for that. Sorry but I
don't have any links handy right now.
And please delete your signature...it's making a mess of the forum display
of your posts.
Bob

How can I set my Ipod Classic to play the next podcast rather than repeating same one

I have several episodes of a podcast on my Ipod Classic. I would like to set it so that when one finishes, the next episode starts. How can I do this?

As you may have found out, the iPod Classic will play Podcast episodes in reverse order if you let it simply play from the programme's episode list.
The solution is to create a Playlist with the epsiodes in the order you want them to play. You can either create a Playlist in iTunes and Sync it to the iPod, or create an On-The-Go Playlist on the iPod itself. Make sure that shuffle is turned off, because if it is on, the Playlist will stop at the end of the first episode.
Oh, and to stop it repeating the same one, turn off the repeat feature too.

How can I set an outlook mail account to the mail app in mac

My outlook mail account doesn't work in the mail app, it keeps asking for my password everyday, and the outgoing mail server says "outlook.com (dissconected)".

I don't have Hotmail, but generally, web based email accounts need to be set up within that account (in this case Hotmail) - you need to go to your Hotmail account and check if it can be set up as an IMAP or POP account with emails automatically being forwarded to Mail. Hopefully someone with a Hotmail account will chime in with more specific info; in the meantime, check out the options in your account there.

How can we set a process chain to trigger the nodes w/o manual intervention

Similar Messages

Maybe you are looking for