How can we show the last consumption dates?

Hi BEx Gurus,
I have consumption dates and quantites for a material and a time interval in my query.
In the selection screen i specify a time interval. Then i execute query. I can see last consumption quantity due to calculated key figure(enhancement> last quantity due to calendar day(consumption date)).
Up to now eveything is OK. But i want to see also last consumption date. I tried formula variable with key "date", set it to the last . I drag it to the calculated key figure. Put it to the colums. But when i executed i saw that last date is the date that i specified in selection screen. It is not the date that last consumption is exist.
Could you please help me?

var letter:Number = Number(new Number(0x2714).toString(10));
trace(String.fromCharCode(letter))
Source : Adobe Website
If you cannot still cannot display it, just change the font family,
simple way is by copying the character into the text field, then change the font family until the character show up correctly, then just input that code i give to u to the script
PS : Just done it

Similar Messages

How can I show the last amend date of the .rpt file on my report?

I want to show the last amendment date of the .rpt file on my report.
Modification date and time refer to the actual report rather than the .rpt file.
Does anyone have any suggestions? I am using version 11.2.
Thanks,
Anne-Marie

annemarier,
Have you tried the "Modification Date" or "Modification Time" fields located under the Special Fields section of the Field Explorer?
I've never used them, but they seem like good candidates.
Jason

How can we update the last synchronization date and time..on SUP in sccm 2012 R2

Hi,
Can you any one please guide me how can i update the last synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log
"Wakeup for a polling cycle " and " Wakeupby inbox drop" and "Wakeup by SCF change"
Thanks
Balaji K

You'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
Have you reviewed wcm.log and wsusctrl.log?
Jason | http://blog.configmgrftw.com | @jasonsandys

How can you find the Last Modified Date of a particular table

Hi,
I want to show to the LAST MODIFIED date of a particular table to the user before refreshing the table with new data. Experts please suggest me the way using JDBC-SQL connection.

There is no generic SQL way for this. It depends completely on the features your DBMS offers. With Oracle you'd need to create column which gets updated in a trigger. I believe MS SQL Server offers a special data type for this, which is updated automatically. I don't know about others.

Importing Notes into SOD - How can I set the Last Modified Date?

We are still in the process of getting all of our users over to Siebel. We launched in waves and therefore have some users who were still utilizing the legacy systems while some were working away in Siebel. What I'm trying to do now is to take the reps notes from the legacy system and bring them back over into Siebel. I've got the file created with the account external id, subject, note(description) and the date the note was created in the legacy system. When I try to import the date can not be set and is defaulting to the date the acutal note was created in Siebel.
This is a problem as I have 3 years of account history that must get loaded and if I import it all now it will push the current notes in the system to the very bottom of the list which will upset the reps who started uisng Siebel in the first wave.
My goal is simply to order them from newest on top to oldest but I can't seem to find a way to do that using the import tool as Last Modified Date isn't an option for me to import.
Is there a way to do it? If not does anyone know of a work around to achieve the same goal?
Any help is much appreciated.
- john

Would that show up in the Notes section of the account detail if I do that? I've never tried that one before.
After the R16 releiase the reps use the "hover" functionality to see their notes data in the top right of the application (or in the notes section of the account details).
Edited by: Xeroid05 on Nov 25, 2009 8:09 AM

When I updated/upgraded last it took away my Big Fish Games tool bar and WILL NOT reload it no matter what I do. How can I undo the last upgrade/date?

My original question says it all. I cannot get my Big Fish Games toolbar to reload. It will with internet explorer but not with your product's new upgrade. I wish to undo the upgrade to the earlier version so I can get my toolbar back.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
You should avoid using the same Firefox profile with different Firefox versions.<br />
If you currently do then create a new profile exclusively for the Firefox 4 version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Please help.........how can i get the last date of the month?????

Hello....
I want to get the last date of the month.
For example, the last date of Jan is 31.
How can I get the last date of the particular month and year ????
Thanks for help.
Gloria

Hi Gloria
1. How can I compare the date???date1.compareTo(date2)
where date1 and date2 is a java.util.Date Object
will return 0 if it is the same date
or
date1.after(date2)
where date1 and date2 is a java.util.Date Object
will return true if date1 is after date2
(the same for date1.before)
2. How can I change the date format into yyyymmdd format???? I just want the year, month and date.try the java.text.SimpleDateFormat Object
new SimpleDateFormat("yyyymmdd").format(yourdate)
Hope this help.
Please also have a look at a calendar I wrote, (maybe it help)
demo & source :
http://www.geocities.com/globe_software/java/components/
globe_sa

How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
I hope you can explain easily because I am a beginner.

Hey Chunrok,
I've modified the High Speed Data Reader VI slightly so that it now uses the scan rate of the data (as determined from the file) to set the scaling for the data points. If you wanted the start time to be a specific time you could use the start time obtained from your file to set the xscale offset as well.
I hope this helps!
Sarah Miracle
National Instruments
Attachments:
Example.vi ‏281 KB

How can I modify the High Speed Data Reader VI to show the time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its time information in the graph.
How can I modify the High Speed Data Reader VI to show the time information in x-axis?
I hope you can explain easily because I am a beginner.

Format the x axis to either absoulte or relative time.
You can do this by right clickingo n the graph and selecting x axis then formatting from the menu.
Thanks,
Naresh

How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
I hope you can explain easily because I am a beginner.

First, I couldn't seem to find that example either on computer or on the NI sites.
The problem that we're running into is stated in the article that I pointed to - when real time VIs are running, then the OS will stop updating the OS clock. TO us it looks like the clock is losing time. There is a hardware clock on the PXI and it is read only during boot up to set the OS clock. Our discussions with NI have not led to a solution for this problem without checking the time on start and then checking the tick count (which does not lose time) and calculating what the current time is. No access to the hardware clock is supplied.
We're still working on a simpler way to get accurate time.
Rob

TS3376 i have lost my iphone and have put it in lost mode. it says that i can trace the last 24 hours however it is only showing me where the phone was at 7 pm last night and it is grey mode... so obvoiously off how can i see the last 24 hours?

I have lost my iphone 3. I have placed it in Lost Mode however it is only showing my last location at 7 pm last night. How can i see the last 24 hours? it is in Grey so not on..

Find My iPhone only keeps a history of locations after you put it in lost mode. It also has to be online to provide an updated location.

How can I find the last day of the current month

Is it possible to get the last day of the month in reports. Suppose I enter JUL in one of the text field. Now in reports I want to show that JUL contains 31 days. How can I retrieve the last day of the month.
Any ideas?

The first (and fast) solution I think is this:
There is a function MONTH(CURRENT_DATE) that returns the number of the month of the current date.
Now, you could use CASE WHEN expressions to determine the number of days returned since you now how many days does every month have.
For instance, you could do:
CASE
WHEN MONTH(CURRENT_DATE)=1 THEN 31
WHEN MONTH(CURRENT_DATE)=2 THEN 28
WHEN MONTH(CURRENT_DATE)=3 THEN 31
WHEN MONTH(CURRENT_DATE)=4 THEN 30
END
PD. This is faster that use OR expressions like 1 or 3 or 5 because you dont have to try every option.
Hope it helps...but maybe there is another way more automatic.
Edited by: linkln on 03/09/2010 08:21 AM

How can i check the last location of iphone when it was on?

I left my iphone in a taxi, but i found the taxi's home, i went to his home and i told him to give me back my iphone but he told me that he never seen iphone in his taxi.
the iphone was on when i left it in the taxi and it was still on till 4 hours after i left it, probably he found the iphone and went to his home so i just wanna check the last location of iphone, if it shows in his home area so i will be sure that he got the iphone and then i contact the police to take it back but otherwise i can not do anything cause he says i haven't found it.
plz plz help me

it was active when i lost it and i went to icloud website, but it shows offline. that means that it is off.
i just need to know if the iphone keeps recording of location where you go and how can i see the last location of iphone when it was on.

How can I see the last location of a now dead ipod touch 4G that had find my iphone turned on?

How can I see the last location of a now dead ipod touch 4G that had find my iphone turned on? I can see my macbook but I cant see the last location of my ipod touch. I lost it a few weeks ago and figured it would show up. But it has not and I need it again for my job. Please help.

There is nothing you can do now. There are apps available from the app store that would give you that information if installed before it was lost/stolen.

How can i show the first item in the list as selected item

Aslam o Alikum (Hi)
Dear All
How can i show the first item in the list as selected item when user click on the list. Right now when user click the list the list shows the last item in the list as selected or highlighted. Furthermore if the list item have large no of value and a scroll bar along with it then the list scroll to last item when user click it with mouse. I want that when user click the list item with mouse list should show the first item as highlighted.
Take Care
Allah Hafiz

Hi!
You can set list "initial value" using When-Create-Record trigger.
I.g.
:<Block_name>.<list_item_name> := Get_List_Element_Value('<Block_name>.<list_item_name>', 1);

How can we show the last consumption dates?

Similar Messages

Maybe you are looking for