How can we synchronize UOM between ECC and APO?

Hi,
We have configured new UOM (unit of measurement) in ECC. How can we synchronize UOM in APO with UOM in ECC (table T006)?
Thanks and regards, Jose Oyon.

Jose,
Synchronizing the config is simple. Run program RSIMPCUST in SCM.
Synchronizing changes to affected master or transactional data (if required) is much more complex. The best method by far is to create the new UOM config in ECC, and synchronize the config into SCM. Only then do you begin to use the new UOMs in ECC Master data and ECC transactional data. Existing transactional data, depending on what is is, will be very difficult to change UOMs and have the UOMs in SCM synch, without quite a bit of manual effort.
Rgds,
DB49

Similar Messages

How can we replicate UOM from ECC to SRM.

Hi ,
In ECC I have assign ISO code against the UOM.
I have replicate ISO code from ECC to SRM. But unable replicate UOM.
How can we replicate UOM from ECC to SRM?
Thanks with regards
Sachin

Hi Sachin,
UOM are uploaded in SRM through object DNL_CUST_BASIS3. It's part of master data replication.
You should refer following link, it will give you idea how to load mentioned object in SRM:
MASTER DATA REPLICATION: SETTINGS
I hope it helps.
Regards,

How can I transfer photographs between Revel and Photoshop (CS3)?

How can I transfer photographs between Revel and Photoshop (CS3)?
any Ideas?

Hi poetryplease,
Unfortunately, there is no Creative Cloud connection between CS3 and Revel. You can upload your images that you have edited, etc, in Photoshop from your desktop into Revel or download your Revel images to your desktop then open in Photoshop.
Glenyse

How can i synchronize mac address book and calendar to icloud

how can i synchronize mac address book and calendar to iclod?

What version of OSX do you have.

Withdrawal Qty don't match between ECC and APO

Hi Experts.
I am facing a discrepancy for Withdrawal Qty between ECC and APO before delivery/PGI creation.
In ECC T.code MD63 I am able to see the withdrawal Qty as expected but in APO a duplicated withdrawal Qty is being created. But this is not happening for all materials, only some specifics materials. I did a check in Material Master data and I have no found any difference between a material that is working and one that is not working...
Can please somebody explain me why APO is dobling the Withdrawal Qty.
Thanks a Lot
Daniel Campos.

Please check wthether you have dp index duplication in this problem.
Please follow the process.
For this process , you need to follow these steps .
1. From the table /SAPAPO/MATKEY , find the product id of the product for which you feel there is problem .
2. Find the location id from table /SAPAPO/LOC for the location.
3. Use the above found 'product id' and 'location id' to find the dp index in table "/SAPAPO/DP_HEAD " .
Enter the planning version ' 000 ' in this table . If there is some error you will find multiple entries of the 'dp index ' in this table for the ' 000 ' planning version. If error found use below program to delete the dp index .
4. Precaution should be taken before we delete the 'Dp Index' as the consumption history is lost due to this . In the program 'Z_DEL_WITHDRAWL' there are 2 check boxes " update " and " list ". List will show the DP index and update will delete it. Need to extremely careful in this program as wrong selection will cause problem .

HT4489 How can I synchronize contacts between Apple Address Book/iPhone address book and Outlook (I'm on Mac OX10.7.4 and using Office 2011)?

I appear to have done what I should to move to iCloud on my Mac, MacbookAir, iPhone and iPad. Using Outlook 2011 on the iMac and unable to sync contacts between Outlook and my Apple Address Book and iPhone over the cloud. I gather lots of people have the same problem but some appear to have solved it... any ideas?
Also, in some sync, I managed to duplicate the entries on the Address Book on my Mac, whereas the iCloud Address Book is ok. How can I replace the Address Book on my computer with the one on iCloud?
Thank You for any help!

Hi Lucy, I had the same problem with Outlook data sync. Once you've enabled iCloud all your contacts are moved to iCloud and are no longer stored on Mac, that's why Outlook cannot reach them - there is simply nothing to reach as data physically stored in cloud.
I use SyncMate to solve this problem. This app allows connecting and syncing numerous devices and accounts with your Mac and they have recently added iCloud into this list (here the page where they describe sync with iCloud http://www.sync-mac.com/cloud-sync.html ).
This is how I established sync of my Outlook data with iCloud via this app.
1. SyncMate syncs only that data which is located on your Mac so you will need to move your contacts back to Address Book on mac from iCloud and disable iCloud for contacts (in order they were stored on Mac, not in iCloud).
2. You install SyncMate and add iCloud as a new connection (depending on data you want to sync you need to choose "Cloud contacts" or "Cloud calendars" connection in SyncMate wizard and log into your iCloud via SyncMate). Once you've done this, you can sync data on Mac with iCloud via SyncMate.
3. I may assume that automatic sync option is enabled in Outlook preferences (as previously your contacts on Mac were synced with Outlook). If no - please, enable it (got to Outlook preferences).
4. Once all this done, data will be automatically synced betwen Outlook and iCloud (latter via SyncMate). The trick of SyncMate is that data is physically located on your Mac (thus ensuring it will be synced with other devices and accounts SyncMate supports, as I said before, SyncMate works with data which is located on Mac), but you still can have it in iCloud (sync will be performed via SyncMate, no need to enable iCloud itself).
5. And of course, you will be able to sync your iPhone contacts with your Mac (SyncMate supports sync with iPhones also). These contacts will be also synced to Outlook.

How can I get connection between VC and back end ABAP system

Hi, I'm developing the kits in the VC platform, and I need to access the back end system designed by ABAP. For example, the system provides some public functions(not web services), and I hope when I click the "search" button, the VC front can call the remote functions and get the data from the back end system. In addition to that, the most important is I must keep the connection real-time. How can I do it?

Thanks for your help. At present, my VC version is 7.1.4 which isn't installed in the portal server but in local machine, and I'm new in the VC. What I want is when I click the "search" button(in the properties pannel), I can get the data from the remote server. I know the VC 6 provides similar functions, but the current version doesn't. Could you explain the details of how to get and keep the connection between them? Thanks so much.

How can I resolve conflict between itunes and Windows 8.1

When downloading itunes to my laptop computer, using Windows 8.1 my email/network account will not work on that computer. It is fine on other devices such as ipad and Windows phone. I can also pick up emails on online on the same laptop. There appears to be a conflict between itunes and Windows 8.1

Please see Boot Camp for comments.

How can I transfer file between PC and iPhone?

iPhone does not show in MyComputer after connected to PC. How can I transfer file to/from PC?

iPhone does not support disk mode, so doesn't show in My Computer. You can transfer files through iTunes (Apps tab in the main window) if you have an app on the iPad that works with that kind of file. If you don't have an app, GoodReader is a good choice because it handles many different file types.
Alternatively, you could user Dropbox (cloud storage) which will allow you to share files on your PC with the iPad.

How can I synchronize Documents between two Macs

My early 2007 iMac has been hospitalized for over two weeks waiting for a new logic board from Apple. I have a mid-2009 MacBook Pro to use in the meantime, but have never synchronized the two machines, so many files that I want/need are not available. When the iMac gets back home, I would like to copy the complete Documents fiolder from the iMac to the MacBook and then find some way of keeping them synchronized in the future. (Both my machines are running OS X 10.7.2.)

InSearch wrote:
you can check out syncmate - it syncs data between Macs. According to information at their website, folders can be synced in real time - seems like it's what you were looking for.
According to information on their website you get 50MB for free and 200MB if you pay $40, I don't know about you but I fill 50MB very fast.
http://www.sync-mac.com/syncmate-expert.html

How can I synchronize a PXI 5401 and PXI 5124?

I want the PXI 5124 to start aquisition exactly when PXI 5401 starts generation. I want both this devices to trigger al the same time.
My problem is that PXI 5124 triggers the same times that the number of cicles of my arbitrary function generated by PXI 5401.

A solution that you can adapt to your devices is given in the following link:
http://forums.ni.com/ni/board/message?board.id=150&message.id=1072&requireLogin=False
try to follow the instructions fixing the parameters and the functions of your device
and if you need something else
let me know
Erwin Franz R.

How do I synchronize files between PC and MAC?

I have Adobe Illustrator installed at work (PC) and at home (MAC). I would like to be able to work on the same AI file from work and home.
I created a file at work and saved it to the Creative Cloud folder.
At home, I was able to synchronize the file folder content and work on the file.
The next day at work, I created another file. This time, this file did not synchronize to the CC folder at home. The CC dashboard in Assets/Files section says all files are up to date.
I disabled the CC synch on the MAC, then re-enabled it. This seems to have recreated a couple of files on the PC side. The CC folder on the MAC still does not show the new files.
What am I missing here?

I found the solution here ->Re: Creative cloud doesnt create a cloud folder on my Users Folder?
The following solution worked for me. I guess the MAC side didn't have proper permissions
derekajack Jul 28, 2014 5:48 AM (in response to StilesAjax)
Hi,
Please try the following workaround:
MAC
1. Quit the Creative Cloud desktop application.
2. In Terminal, copy and paste this command:
rm ~/Library/Application\ Support/Adobe/CoreSync/options.tix
3. Launch the Creative Cloud desktop application and start syncing.
WINDOWS
1. Quit the Creative Cloud desktop application.
2. Open the Start menu, and type 'cmd' in the search box, then enter to start a command prompt.
3. Copy and paste this command at the command prompt:
del %APPDATA%\Adobe\CoreSync\options.tix
4. Launch the Creative Cloud desktop application and start syncing.

Communication between ECC and CRM

Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-Vishal

Hi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal

Issue in CIF data between ECC to APO

Hi Experts,
We have ECC and APO system in our landscape. we have configured CIF and transferred data between ECC and APO however after ECC system refresh CIF configuration is not working. we verified and reconfigured the CIF configuration but still no luck.
strange thing is, while sending the data for e.g vendor from ECC to APO, there is no error reported. It displays successful in both qRFC trace files but the transferred data is nt reflecting in APO system.
There is no system run time error, no errors in system log (SM21), no logs in SLG1 application log, no erros in qRFC trace files.
we have enabled RFC user trace but can't conclude the issue. could you please anyone let me know where we can check the error log or how to resolve this?
Outbund Queue logs from ECC:
QTYPE :OUTBOUND/S
DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:44:56 300             20.03.2015 17:44:56 N          N
        0A1A01720F70550C0F4019E7                                       SENDING
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                      QTYPE :OUTBOUND/S
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:44:57 00:00:01 300          20.03.2015 17:44:56 N       N
        0A1A01720F70550C0F4019E7                                       CONFIRMD
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                      QTYPE :OUTBOUND/S
DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:44:57 300             20.03.2015 17:44:56 N          N
        0A1A01720F70550C0F4019E8                                       SENDING
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                      QTYPE :OUTBOUND/S
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:44:57 00:00:00 300          20.03.2015 17:44:56 N       N
        0A1A01720F70550C0F4019E8                                       CONFIRMD
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Inbound Queue trace log from APO:
QTYPE :INBOUND
DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 300                20.03.2015 17:44:56 N          N
        0A1A01720F70550C0F4019E7                                       SENDED
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 17:39:48 300             20.03.2015 17:44:56 N       N
        0A1A01720F70550C0F4019E7                                       FINISH
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                       QTYPE :INBOUND
DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 300                20.03.2015 17:44:56 N          N
        0A1A01720F70550C0F4019E8                                       SENDED
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 17:39:48 300             20.03.2015 17:44:56 N       N
        0A1A01720F70550C0F4019E8                                       FINISH
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C2559         0A1A01720F70550C0F4019E7      RUNNING
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C2559         0A1A01720F70550C0F4019E7      FINISH
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C2559         0A1A01720F70550C0F4019E7      CONFIRMD
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C255A         0A1A01720F70550C0F4019E8      RUNNING
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C255A         0A1A01720F70550C0F4019E8      FINISH
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C255A         0A1A01720F70550C0F4019E8      CONFIRMD
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
Thanks and regards,
Pradeep

Hello Pardeep,
Please check the setting of SMQS and SMQR for CF and client registration
these entries, the field 'TYPE' is set to 'R'.
QIN scheduler may be available for every client if you are working in this client with registered inbound queues.
Choose Edit->Activate scheduler from the menu (available in both SMQR and SMQS)
During processing in dialog work processes, the system uses a parallel RFC to restart the registered inbound queues. For this, you can use transaction RZ12 to specify a group of application servers and dialog work processes that are allowed to use a QIN scheduler. You must use transaction SMQR to assign the group name to the relevant QIN scheduler.
Different parameters in SMQR are explained in note 1579728. The explanation for SMQS is similar
Also try the report RSQIWKEX
Best Regards,
R.Brahmankar

How can I synchronize the app between my iPad and iPhone?

How can I synchronize the app between my iPad and iPhone?

Hi,
May i know which app in particular you are taking about.
If that is Adobe Reader you need to sign-in in Adobe Id and password and that should be it.
Regards,
Ajlan Huda.

How can we synchronize UOM between ECC and APO?

Similar Messages

Maybe you are looking for