How can we test SCript before sending to recipient/

Hi ,
How can we test the script before sending the recipient.
Regards,
venkat.

Hi,
you made your script in order to be use in a bussiness process. So you need to know each process, and then according to that do a sprecific action in the process. Ex: Sales Order creation can print a script.
Wich process is the script intended to?
Regards,
Pedr

Similar Messages

How can i test script

how can i test script. here problem is i developed script in 100 client, but data is available in 120 client. now i want to test the script..? is it possible through client copy?
advance thanks
Regards,
Raj
Edited by: raj on Jun 10, 2009 4:23 PM

hi Sneha and rashmi,
for scc1 is it required to release transporst request? because i have only one request, that should only to use to move devlopment to quality server?
help to be need ful
thanks
raj
Edited by: raj on Jun 10, 2009 5:15 PM

How can I test a RTP(send&receive) application on the same computer?

I an writing an application that lets one computer (A) sends a media file to another computer (B) and B receives it and play it.
But how can I test this application on the same computer
Eg.Transmitter: localhost 43000
Receiver: localhost 43000
It will retuen an error since the port number is alreeady used by another program.
I know if I test it on different computers, it should be fine, but how can I test it on the same computer?

JMStudio sends RTP packets from the same UDP port as the specified in the destination port, so you can't try it in the same computer. The examples provided in http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html follow this rule aswell, but it's easy to modify it:
rtpMgrs[streamid]=RTPManager.newInstance();
localAddr = new SessionAddress( InetAddress.getLocalHost(),localDataPort);
//By deafault, in the examples, they use remote DataPort instead of localDataPort.
//You can specify localDataPort to any different free port number, or to
//SessionAddress.ANY_PORT if you don't mind the port number
remoteAddr = new SessionAddress(destIpAddr,remoteDataPort);
rtpMgrs[streamid].initialize(localAddr);
rtpMgrs[streamid].addTarget(remoteAddr);

HT5245 How can I test a iPhone or any device before come out to the stores

How can I test a iPhone or any device before come out to the stores

Also, if you mean test it in terms of the carrier you will have the normal trial period for the carrier to test signal and reception and such ifyou are signing up for new service (or a new contract term). AT&T is 30 days to return or exchange the phone if it does not work where you need it to work. I don't know about Verizon or Sprint these days, but it will be at least two weeks, if not 30 days as well.

Help me how can i test mms sending in my application

please help me how can i test the senario to send the mms in my Application i am using motorola sdk and using eclipse as a development IDE plzz help me out how can i test it in the real senario.
Thanks in advance

Question: Do you think the response from the support staff is correct? I mean, surely, I can't be the only CF user on a shared box whose other users need to modify the date and time within their applications. Even if they do it at the application level for their domain, surely it wouldn't affect mine, would it? That was what was implied by the support people, but I have a feeling they are way off, or covering for some goof-up on their end. I struggled like hell yesterday trying to get this to work and I did not get very far at all.
I found an interesting tutorial here which does a comparison of time zones and, theoretically, this might do the trick. But if what the guy told me was nonsense then I won't bother with it. For the record, our calendar has been working fine for about a week now.

How can I test for a special character in action script ?

I have XML which I use within Flex. One off the values passed in is a special character (the infinity symbol). This displays great within the datagrid, but I want to do some other action script rendering based on this. How can I test this in an if statement.
XML snippit
<data>∞</data>
var infin:String = data[column.dataField];
if (infin == "∞") // This is the bit I can’t work out
// Do Something here

Hi schaerm,
you have to dig deeper.
An idea is this one:
The red marked word is containing the unit - in a coded way. Somewhere in the LV help you can find the description of this coding (I remember a chapter on memory representations of all LV datatypes...). (There surely is an easier or better way - but the example is done quic&dirty.)
You can also format the number into a string and analyze the unit here...
Message Edited by GerdW on 02-07-2010 07:21 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can i test if i'm in the EOF of my file text in applescript?

hello
i want to known how can i test my EOF of my file text or if i meet "Plan N°" when i read each linesdxhezdcxezkchcochzhejc
my file text :
Plan N°1
94.64%
MDF_280;;3050;1850;1
piece;0;0;500;500;0;AAA
piece;0;504;500;500;0;AAA
piece;0;1008;500;500;0;AAA
piece;0;1512;500;500;0;AAA
piece;0;2016;500;500;0;AAA
piece;0;2520;500;500;0;AAA
chute;0;3024;26;500
piece;504;0;500;500;0;AAA
piece;504;504;500;500;0;AAA
piece;504;1008;500;500;0;AAA
piece;504;1512;500;500;0;AAA
piece;504;2016;500;500;0;AAA
piece;504;2520;500;500;0;AAA
chute;504;3024;26;500
piece;1008;0;500;500;0;AAA
piece;1008;504;500;500;0;AAA
piece;1008;1008;500;500;0;AAA
piece;1008;1512;500;500;0;AAA
piece;1008;2016;500;500;0;AAA
piece;1008;2520;500;500;0;AAA
chute;1008;3024;26;500
piece;1512;0;700;300;1;BBB
piece;1512;704;700;300;1;BBB
piece;1512;1408;700;300;1;BBB
piece;1512;2112;700;300;1;BBB
chute;1512;2816;234;300
chute;1816;0;3050;34
Plan N°2
93.58%
MDF_280;;3050;1850;1
piece;0;0;300;700;0;BBB
piece;0;304;300;700;0;BBB
piece;0;608;300;700;0;BBB
i want test
i : line 1 ok next
i <- 94... ok -< next
if i == MDF_280 => loop (exit while EOF or when i == Plan N°)
do ....
end loop
soory but i'm novice in apple script
and i'm french
i need to improve my english
this is my applescript
repeat with l in lesLignes
if (l as text) starts with "MDF_280" then
while ???? (!= EOF or "MDF_280") do ....
if (l as text) starts with "piece" then .....
end if
end if
end repeat
THANKS

property sString01 : "Plan N" -- String to search for.
property sString02 : "MDF_280" -- String to search for.
set uFile to (choose file) -- Select file to process.
set tText to read uFile -- Read contents of selected file.
repeat -- Cycle through contents of 'tText'.
set {offset01, offset02} to {offset of sString01 in tText, offset of sString02 in tText} -- Obtain offset locations of 'sString01' and 'sString02'.
if (offset01 = 0) then exit repeat -- If 'sString01' does not exist, exit repeat loop.
-- Adjust content of 'tText' as to position of 'offset02' relative to 'offset01'.
if (offset02 > offset01) then set tText to get (characters (offset02 + (count sString02)) through (count tText) of tText) as string
set offset01 to (offset of sString01 in tText) - 1 -- Obtain next offset of 'String01'.
if (offset01 < 1) then set offset01 to (count tText) -- Correct 'offset01' to obtain remaining contents of 'tText'.
set tmpText to get (characters 1 through offset01 of tText) as string -- Obtain subset content of 'tText' - between 'sString02' and next 'sString01', of end of 'tText'.
display dialog tmpText -- Display obtain subset of content of 'tText'.
end repeat
Since you posted 'how can i read a file text by applescript', and have not replied to others posts; nor marked any reply as 'answered' or even 'helpful'; and, I anticipate you creating a new post asking how to incorporate one of the 'how can i read a file text by applescript' replies into the above (or similar) code - a revised version of 'how can i read a file text by applescript' incorporated within the above code is provided below.
property sString01 : "Plan N" -- String to search for.
property sString02 : "MDF_280" -- String to search for.
property sString03 : "piece" -- String to search for.
property sString04 : "chute" -- String to search for.
set uFile to (choose file) -- Select file to process.
set tText to read uFile -- Read contents of selected file.
repeat -- Cycle through contents of 'tText'.
set {offset01, offset02} to {offset of sString01 in tText, offset of sString02 in tText} -- Obtain offset locations of 'sString01' and 'sString02'.
if (offset01 = 0) then exit repeat -- If 'sString01' does not exist, then exit the repeat loop.
-- Adjust content of 'tText' as to position of 'offset02' relative to 'offset01'.
if (offset02 > offset01) then set tText to get (characters (offset02 + (count sString02)) through (count tText) of tText) as string
set offset01 to (offset of sString01 in tText) - 1 -- Obtain next offset of 'String01'.
if (offset01 < 1) then set offset01 to (count tText) -- Correct 'offset01' to obtain remaining contents of 'tText'.
set tmpText to get (characters 1 through offset01 of tText) as string -- Obtain subset content of 'tText' - between 'sString02' and next 'sString01', of end of 'tText'.
set tPars to paragraphs of tmpText -- Obtain list of 'piece' entries.
repeat with i in tPars -- Cycle through list.
if (i begins with sString03) then
set {var01, var02, var03, var04, var05, var06} to my handle_List(i) -- Obtain individual values.
-- Your code here.
display dialog ("Piece: " & var01 & " ... " & var02 & " ... " & var03 & " ... " & var04 & " ... " & var05 & " ... " & var06) -- Code sample.
else if (i begins with sString04) then
set {var01, var02, var03, var04} to my handle_List(i)
-- Your code here.
display dialog ("Chute: " & var01 & " ... " & var02 & " ... " & var03 & " ... " & var04) -- Code sample.
end if
end repeat
end repeat
on handle_List(localList) -- Extract values, from each line of data, and place into a list.
set {oAStid, AppleScript's text item delimiters} to {AppleScript's text item delimiters, ";"}
set tItems to text items 2 through -1 of localList
set AppleScript's text item delimiters to oAStid
return tItems -- Return a list of values.
end handle_List

How can i test my vpn connection?

so recently i decided to test if ver 1.3.0.3 of the quickvpn client would work better with the 1.3.0.5 rvs4000 firmware. i loaded quickvpn to an xp pro computer (freshly built, i might add) and got to work. in order to test the connection, i attempted to piggy back off an unsecured wireless network. this network is on the same ISP network as i am.
i use dynamic DNS, and the unsecured wireless network could resolve my IP correctly, but for some reason i couldnt connect to my home network from the unsecured network. my router is set to respond to lan requests, but i couldnt ping it. my router passes HTTP traffic to a computer in my network, but i couldnt bring up the webpage. finally, my router responds with the router config page over port 443, and i couldnt bring that up.
so i used my ISP's dialup service to test. initially, as always, i had a million problems with the vpn client. systematically, i tried to resolve the issues. i installed the patch in the readme for quickvpn. i checked log files to see where stuff was failing. eventually, i could connect to the VPN, but would get that "remote gateway is not responding" crap. i know of a (poor) workaround for this which allows you to "finalize" the connection, but that workaround doesnt allow you to ping around in your network. sometime later, after randomly messing with settings, the tunnel would connect without the workaround. i have no idea what "fixed" this.
despite all this, my 28.8Kbps connection wouldnt allow me to do anything meaningful on my network. i couldnt connect to the router or to a server of mine (http or fileshare). the only thing i could do was ping internal devices. other requests seemed to "hang" rather than timeout or do anything more concrete. basically, i gave up on testing using dialup, even though my router and the client software confirm a good connection. but i still wasnt convinced.
next, i figured i could create some type of "DMZ" on my network by placing a switch between my ISP's modem and my router. im not a cisco network professional by any means, but im pretty familiar with networking on a above-average level. that said, despite my best, i couldnt get my quickvpn computer to see my router from the "DMZ".
finally, i figured i could just test the tunnel while directly connected to my network's lan. bad idea. everything seems to go okay until it locks up on "activating policy". rebooting or otherwise ending the negotiation ends in the computer being unable to do anything anymore. when i try to ping anything, i get "negotiating ip security" ad infinitum. the only way i could fix this was by doing a system restore.
so here's the question: how can i test my quickvpn connection?why can't i just tunnel through my network? and before you scream that you can't, thegreenbow vpn client has NO PROBLEM connecting to my rvs4000 while connected to my own network.

Hi Aaron,
I am going exactly the same thing as you however, I had my cousin buy and install a RVS4000 at his house in Australia.
I access it from the USA so that I can help manage his Local Area Network, he is just not technical..
I setup a DDNS client on his RVS4000 so that I can always get to his Router via a domain name rather than a IP address.
I noticed that you didn't mention anything regarding importing client certificate into the directory of the VPN client on your PC.
I also noticed I disabled IPSec passthrough on the router in Australia, see the pictures below, not sure why, but the VPN client is working.
I also did not setup any gateway to gateway VPN tunnels, Only added a client , exported certificate as per the manual, See the last screen capture below.
You will also note if you view the screen captures that my cousins RVS4000 has not been upgraded to the new code.Is there a reason for that...not really...he's just a user, not really technical. Also note I have not added any VPN tunnels on my RVS4000.
I have a reasonably reliable connection between the USA and Australia. I didn;t have to play with any other options, just add users to the VPN client database.
Your description of the working environment of your PC is missing details on the version of XP, so i will mention the following taken from the software release notes of the RVS4000 ;
There is a known issue with Windows XP SP2 Firewall.
ICMP packets are always dropped by the firewall when the firewall is enabled.
This issue causes the QuickVPN client to be unable to establish a tunnel with the remote QuickVPN server successfully.
Microsoft has released a patch to fix this issue, which you can get from:
http://support.microsoft.com/kb/889527/en-us
After you install the patch, the issue should be resolved. You can also fix this issue by upgrading Windows XP to SP3.
You cannot plug a PC on the same network as the router for testing, they must be on dissimilar WAN networks for testing purposes.
Your remote PC VPN client will not be allocated a IP address in the RVS4000's network, hosts behind the RVS4000 will still respond to pings, as they direct the responses to their default gateway, the RVS4000.
The thegreenbow VPN client is a distracter at this point costing 50 something EURO for a license, lets try to get the quickVPN client working !
So, if you still wish try the following, firstly make sure your XP has been upgraded to SP3;
1. If you upgraded your router to the new version of code, then reset your router to factory defaults to re-initialize your router, yes start again.
2. Export the VPN client certificate to the directory that contains the VPN client. In my case it is;
"C:\Program Files\Cisco Small Business\QuickVPN Client"
3. add a VPN client account to the router
4. Use port 60443 from the quickVPN client. and try VPNing to the router.
5 hmmm, if the client still fails try disabling IPSec Passthrough on the router for grins and giggles.
If this fails, call the SBSC at the following location for resolution;
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
good luck ...regards Dave

How can i test the boolean state of button action?

Hello,
in as2.0, how can i test the boolean value if a button was
pressed or not?
I have a simple function im trying to work with like this...
button_btn.onRelease = function (success:Boolean) {
if (success) {
trace("we pressed the button - value is true");
else {
trace("value is false");
working with booleans in this way is new to me - any pointers
will do - thanks!

Well, I'm not really that familiar with using video in flash,
but from what I understand of what you are going for, these are my
suggestions:
If the code within your button has scope of the variable you
are testing for:
_global.myInfoObject;
button_btn.onRelease = function(){
if( myInfoObject.code == (value your are testing for) ) {
trace("value is correct);
} else {
trace ("value incorrect");
if you aren't in scope you can always maybe forward the
onRelease function to some handler that is in scope:
var myInfoObject;
var release = function(){
//to do code here;
button_btn.onRelease = release;
I hope some of these ideas help a little.
You can always send your .fla to my email at
[email protected] and I'll take a look at it.

How can I test RMAN

Hi,
how can I test RMAN ? How can I verify if my RMAN backups are correct and in the case of problem can be helpful ? Apearently we can not recover the dropped objects !!! Then how to test recovery by RMAN ? Any scenari ?
Many thanks before.

How can I verify if my RMAN backups are correct rman>crosscheck backup;
rman>validate daafile "no"
in the case of problem can be helpful ? Apearently we can not recover the dropped objects for point in time recovery
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10769/toc.htm
http://download-uk.oracle.com/docs/cd/B14117_01/server.101/b10770/toc.htm
Message was edited by:
Mohammadi52

How can I test the effect of fill factor?

I noticed that the fill factor in my data base script is set to 80 and I believe i could optimize the performance by setting it to 100. After setting it to 100, how can I test whether it has made a positive effect or not? Currently my database have about
50 tables and thousands of records. Please advice.
mayooran99

You have to monitor the page splits/sec counter. If this counter increases considerably after you change the Fill Factor (FF) from 80 to 100, then it might be a indicator that you FF setting is too high. You can monitor the page splits counter in Perfmon
but a caveat is that this counter is accumulative of all page splits across all DBs on a particular SQL Server. If the clustered index is on an ever increasing numeric field (like identity field), the page splits do happen at the end as the data gets added
– this is not necessarily bad, but the Perfmon counter (Page splits/sec) includes the counts for even this type of page splitting too, which should be ignored.
Check your daily index fragmentation rate - this can be done by storing the index fragmentation levels in a custom table and comparing it with values after you increase FF to 100
However, for heavily inserted/updated tables try changing FF value to 90 first (there is no point in changing FF to 100 for heavily inserted/updated tables as they are bound to incur page splits)
In general, changing the FF from 80 to 100 may improve the read performance of your queries as more data fits into a single page.
There is no blanket % that will be appropriate/optimal for all tables. It all depends on the data and the frequency of the key column that is being updated. So, the only correct answer is TEST, TEST, TEST...
Satish Kartan www.sqlfood.com

How can I test SSL communication

I have successfully imported a SSL certificate to d:\JRE\Sun\1.4.2\lib\security\cacerts in Windows 2003 server. How can I test this SSL communication between my server and the other SSL Windows server?

michaelfromchattanooga wrote:
There is a card plugged into the reader, and it has good data on it as I have just used the printers card reader to copy the pictures off of it. But the wireless printer is very slow.
I contacted Sonnos (manufacturer of the expresscard/34) and Eric from their support department was kind of smart-mouthed about it. He assured me with 100% certainty that I had inserted the card reader backwards. I replied to him that the card will NOT allow you to insert it backwards, by design. This was yesterday and he has yet to reply.
My main question is if the card reader is defective, or is the slot on my Macbook Pro defective? I only have one MBP so I can't test the card reader in another machine.
Anyone?
Is the slot being recognized in your system profiler? >(option key)About this Mac>Hardware.
You can also run the Apple Hardware test by booting with the D key held down.
You can try put the card in before you boot or reboot with it in. It may only recognize if present at boot.
MacBook Pro, Mac OS X (10.6.7), 2.4GHz IntelCore i5 320 HD 8GB RAM

How can I test my thunderbolt port? It's not working after the update to 10.10.1

I have been using my computer with the Thunderbolt Port for a while and after updating to 10.10.1 and after I while of using my computer I tried to use the thunderbolt port with my external monitor.. and it doesn't work at all.. video doesn't come out.. I tried a different screen with the mini adapter from thunderbolt to HDMI and another with thunderbolt to VGA and in both adapters I don't get video from my mac.
Any idea how can I test my Thunder bolt port?
This is what I have done:
1 cable adapter thunder bolt to mini HDMI to an LCD screen with HDMI : No video, but my computer detects that there is something connected
2 cable adapter thunder bolt to VGA to an LCD screen with VGA : No video, but my computer detects that there is something connected
3 cable adapter thunder bolt to mini HDMI to an 40' TV with HDMI : No video, but my computer detects that there is something connected
All the test pass from the Hardware test at the startup (press D at boot time).
Any ideas? my guarantee it's expired and no coverage. Due the nature of where the port it's installed, if this is a hardware problem seems that I will (may be) have to buy the Logic Board.. no good. No bueno!!
Thanks!!!

restore iPhone

How can I get Apple to send the invoice of one of my orders?

I ordered a MacBook Air 13 at apple store online but I haven't get the invoice of the product. How can I ask apple to send it to me?
Thank you,
Luiza

Thank you for your response, Dominic. I'm in Brazil now and unfortunately I'm not able to call the 1-800 number. There is another problem, I can't solve this by viewing my order online, as I haven't inserted my apple ID to the order ...it doesn't allow me to print the invoice or do anything else about it...
Do you know if there's any online support that I can contact?
Thank you again!

How can you test the video card?

I just got a cinema display and I am having trouble calibrating it.
I just notice that when I open up bridge CS4 it takes awhile for it to refresh. When I go to film strip view and click on a picture it will not diplay it.
Then I change views and there is a line down the middle of the display where it gets update but the left side does not.
Any thoughts on what it could be?
Video card of is it the monitor?
How can I test it?

The only ways I can think of to test the card are XBench and the Apple Hardware Tests (insert Install DVD and restart while holding down 'd')

How can we test SCript before sending to recipient/

Similar Messages

Maybe you are looking for