How can we transform a video from progressive to interlaced with final cut?

How can we transform a video from progressive (720x1080 50p) to interlaced (PAL) with final cut pro???????
The video is taken with Sony EX3

Hi Nick
Sorry but your first link says +"The file you are trying to access is temporarily unavailable."+ ... but tell me, are you viewing these interlaced encodes yourself on an interlaced monitor (eg are you burning them to disc and viewing on a TV) as they are meant to be seen, or are you just playing them back from file on your (progressive) computer display?
By the way, I did manage to download your source file and encoded it here. Looks ok to me ... in a addition to the instruction above, I also changed the Field Dominance in the Encoder > Video Format tab to Top First (it defaulted to progressive due to the progressive source file).
Let me know if that helps
Andy

Similar Messages

  • How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

    How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
    I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
    Simply exporting from Premiere back to final cut is also very complicated.
    Thanks for any ideas.

    First, copy the card to a hard drive connected to your fcp workstation.  I always back up all card based media at least 2 or three times.  All hard drive will eventually fail.  It's a question of when, not if.
    I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files.  You can try importing these directly into fcp.
    If you don't, you can try something like clipwrap
    http://www.divergentmedia.com/clipwrap
    or
    Magic Bullet Grinder
    http://www.redgiantsoftware.com/
    But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy.  HDV is a problematic format.  Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

  • Outputing video from the MacBook Pro with Final Cut Pro

    Hi
    I wounder if there is a BlackMagic card that can be connected to the new MacBook Pro - with FW or with ExpressCard 3/4.
    I want to output video signal from Final Cut Pro to an external monitor, and to capture footage into the FCP.
    Thanks
    Roi

    Ditto-- I need to know the same thing. i want to view hd video from final cut on an external monitor. Does someone have an answer?

  • How can i detach the video from a clip so i can only use the audio when using imovie?

    how can i detach the video from a clip so i can only use the audio when using imovie?

    First, go to iMovie/Preferences and enable the Advanced Tools.
    Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

  • How can I delete a video from an album on my iPhone 5?

    How can I delete a video from my iPhone 5? I created an album and accidentally placed a video in the album and want to delete it. Is it possible to delete a video or picture from an album?
    Thanks!

    How do I delete photos from my Photo Stream in iCloud?
    Individual photos cannot be deleted from your Photo Stream. You can, however, delete all the photos in your Photo Stream by clicking the Reset Photo Stream button in your account at icloud.com. The Reset Photo Stream button will instantly delete all Photo Stream photos stored in iCloud, but it will not remove any Photo Stream photos that have already been pushed to your devices."
    iCloud: Photo Stream FAQ

  • We are evaluating the use of iPod touch devices to record best practice videos on our manufacturing floor and to post to an internal Moodle web site. How can you upload a video from the iPod touch to a site other than YouTube?

    We are evaluating the use of iPod touch devices to record best practice videos on our manufacturing floor and to post to an internal Moodle web site. How can you upload a video from the iPod touch to a site other than YouTube? The Moodle upload interface is expecting a file selection dialog box like windows or OSX. I do not want to have to go through an intermediary step of messing with a pc.
    Thanks!

    It should be around 7 and a half gigs. In iTunes, across the bottom there should be a bar that show how much storage is being used and by what. (music, movies, apps, etc.) To make music take up less room, you can check the box to make it convert the music to 128kbps AAC. This lowers the quality, but with most earbuds and speakers, you can't even tell the difference.
    The iPod touch has parental controls built in. You'll find them in Settings. I think they only work for enabling/disabling Safari, Mail, YouTube, and App Store. Here's an app that does more: http://www.mobicip.com/online_safety/ipod_touch

  • How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

    How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

    download the new you tube apps in i tunes, in os6 just pick a video in the photos apps and select share, the old you tube app icon will appear

  • I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    You are in luck, Refer to this recent post by tt2, on recovering media using 3rd Party Software.
    He has made a comprehensive list, browse through them and decide which  suits your requirements.
    Have a nice day!

  • How can I download a video from a trusted site two minutes in length ?

    How can I upload a video from a trusted site to an installed version of Adobe Flash Player ?
    What is involved in downloading a two minute government promotional video for a travel destination ?

    For YouTube videos
    http://www.any-video-converter.com/mac-tutorial/6-ways-to-download-youtube-video s.php
    For other sites it depends upon the site.

  • How can I download a video from the net? is there is any special download softwear than realplayer?

    how can I download a video from the net? is there is any special download softwear than realplayer?

    There are a variety of file formats for storing and sending video. You will probably want to install VLC, which handles most open formats. RealPlayer is used on their proprietary format.     
    http://www.videolan.org/

  • How can I retrieve deleted videos from my iPad 2?

    How can I retrieve deleted videos from my iPad 2?

    Did you backup your device after you took the video but before you deleted it?  If so, restore your device with that backup.  If not, then there's no way to retrieve that video.

  • I have ipad 1st generation. How can I remove featured videos from you tube app?

    I have ipad 1st generation. How can I remove featured videos from you tube app?

    Start by providing some relevant information if you need troubleshooting help. We have no idea how or what you are doing whatever it is that you are doing.

  • I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it.  I need the videos out of there.  I have tried every way I can think of.

    Like the title says...
    I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it.  I need the videos out of there.  I have tried every way I can think of.
    I have also tried from the iphoto side, to export the videos or share them to final cut.  I have had no luck.
    I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
    I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible.  I see this on forums and youtube videos of the older versions.
    However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
    Thank You for the Help

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • How can i transfer my contacts from iphone4s to imac with different apple id without loosing everything on my phone

    how can i transfer my contacts from iphone4s to imac with different apple id without loosing everything on my phone

    Move the iPhoto library from the Pictures item of the Finder's sidebar on the MacBook Pro to the same location on the iMac via FireWire Target Disk mode, or a drive, partition, or disk image formatted as Mac OS Extended, or through AFP file sharing over a network.
    (68308)

  • Can I transfer a project from the trial version of Final Cut Pro X to the Full version

    Can I transfer a project from the trial version of Final Cut Pro X to the Full version which I have now downloaded.

    The trial version is named "Final Cut Pro Trial" and the App Store version is called "Final Cut Pro".
    So, they can both be in the Applications folder at the same time, but only one can be open/launched at a time.
    If, for some reason, your trial is older (like version 10.0.4) that your newly purchased FCPX (should be 10.0.5), and you do not click Update to your events/Projects, they will NOT show in the bought version!
    Open the licensed FCPX and make sure it does update your things, in case it asks for it!

Maybe you are looking for

  • Problem with parallels desktop.....

    hi. im not sure if this has been said or answered before but i have installed the trial version of parallels desktop for mac. i don't really know how to use it and i just really wanted to see what it does. unfortunately....i dont need it. but, now i

  • Permissions changing over and over

    My Mac started to give me a lot of spinning wheels. I runned the Disk Utility, found and repaid a lot of damaged permissions. Everything went Ok for an our or so, and then it happened again. The permissions were damaged again. And it is repeating sin

  • .eps no Thumbnail in CS3

    Bridge used to generate thumbnails for .eps vector files from a clip art gallery I have, but now all I get is generic icons in the Preview pane. I've purged the cache and deleted preferences. Any other ideas?

  • How to display the dataset field values in my ssrs bar chart report ?

    HI i have a Bar Chart report in that i want to display the dataset one  field values in my x-axis of my ssrs report? so how should i display those values into my bar chart report? consider i want to display the Every Qtrly details in my x-axis so how

  • How to check at replicat process a target conditional before add

    How to check on replicat , check on target table conditional before add data. Example : REPLICAT   SOURCEDEFS /u01/app/oracle/ggs_2/dirdef/TABLE_SOURCE MAP  sourcet.table,target.table QUERY "SELECT A.COL3 FROM TABLE_SOURCE A, TABLE_DEST B where B.COL