How can we  transport the master data from one server/client to another server client?

plz guide me this issue

Re: transfer data in between servers
Navaneetha Krishnan Jun 25, 2007 2:59 PM (in response to suresh chandrra
Most of the times, masterdata is transferred between servers through ALE. This is considered to be one of the best and efficient ways of transferring data. You can try this too.
BDCs are another way (which can be done through LSMW or through a custom made program.

Similar Messages

  • How can we transfer the accruals posted from one rebate recipient to another in SAP.

    we have like 20 invoices posted in SAP for one rebate recipient. but now the salesman has changed the territory and is replaced with another. starting May1st we need to pay the accruals to the new salesman instead of old salesman. Please advice.
    Regards
    Pradeep

    Ideally, still you need to pay the rebate to the same salesman since accruals is nothing but value accumulated in the past and the salesman is suppose to reap the benefits.
    G. Lakshmipathi

  • How can I restore the game data from an old ipod touch to a new one?

    How can I restore the game data from an old ipod touch to a new one?

    Restore it from the backup of the old ipod.

  • HT1202 My home computer has died. How can I transfer the music/ photos from my ipod classic to another computer

    My home computer has died. How can I transfer the music/ photos from my ipod classic to another computer

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Is it possible to move the master data from one server to onther server?

        is it possible to move the master data from one server to onther server?

    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • How can I transfer all iTunes purchases from one apple id to another

    How can I transfer all iTunes purchases from one apple id to another?

    Delmar Ford wrote:
    Don't agree. I have two accounts, one for work which I set up years ago and bought a few tracks. I've recently bought iPhone and iPad and created a home ID and wanted to transfer the old purchaces. Everyone says it can't be done, but I've done it.
    1. on the iPhone/iPad change your "store" Apple ID to the one you want ot transfer from.
    2. go into iTune on the device and download the purchaces.
    3. on you PC/Mac change the iTunes login to the same as the device's ID
    4. sync your device
    5. change both ID's back and the purchaces stay on both iTunes and your device.
    Delmar,
    The procedure you describe is putting content from two different IDs into a single library, which can readily be done.
    However, each item of purchased content will still be tied to the ID from which it was originally purchased, and they will be treated separately for purposes of Cloud, Match, Purchase History, etc.

  • How can i transfer a digital movie from one apple id to another apple id?

    how can i transfer a digital movie from one apple id to another apple id?

    You buy it from that ID or ask the iTunes Store staff for assistance.
    (80985)

  • How can i extract the particular data from Base tables

    Hi
    I have some Base R/3- Tables . I need to exact the data from these base tables.
    But i need to select some type of datarecords(eg: select Material Documents from MSEG and MKPF tables based on movement types 261,262).
    Something like that . So how can i select the particular category datarecords from base tables. Anyway im going to create the Custom DataSource.
    So please let me know . how can i extarct tha particular data from base tables
    kumar

    Hi Venkat
    See i have some 5-tables . I need to extarct from these tables.
    first i need to extract the data from one table fully.
    Then i need to extarct the data from second table based on profict centers, company codes of first table.
    Then i need to extract the data from third table based on profict centers of first table and movement type = 2p,2n,2s condition.
    So how can i extarct like this data from multiple tables.
    Please let me know
    kumar

  • How can i get the meta data from database?

    Hi, all java and db experts,
    I need to write a tool to generate java file which will be used to hold the resultset of a stored procedure of Oracle. Is there any API call or tools to connect to db and then get the meta data of the return cursor instead of reading stored procedure definition on my own?
    Please help, thanks a lot.
    Hanna

    if i execute a Oracle stored procedure, the resultset of a cursor is returned. It's easy to know the meta data at the runtime.
    However, could i get the meta data about the resultset of a cursor before runtime? Such as by connecting to the database and ask it about meta data of a specified stored procedure?
    Is it feasible?
    DatabaseMetaData dbmd = conn.getMetaData();
    ResultSet rs = dbmd.getProcedureColumns("", "%", "SP_NAME", "%");
    while (rs.next()) {
    String colName = rs.getString(4);
    int colType = rs.getInt(5);
    int colDataType = rs.getInt(6);
    int colPrecision = rs.getInt(8);
    int colLen = rs.getInt(9);
    int colScale = rs.getInt(10);
    long defaultValue = rs.getLong(11);
    But what i get is a list of stored procedure parameters. In oracle, cursor is IN OUT parameter . How can i get the meta data about the resultset of cursor?

  • HT2736 How can I transfer a gift balance from one apple id to another?

    I have changed iphones and created a new apple ID.  How can I transfer a gift card balance from one apple ID to another.  I tried using Itune Gift but it requires the use of a credit card not a gift card.  Any ideas?

    You can't currently transfer an account's balance from one account to another, nor can you use it to gift content. You shoudl be able to use your old account on your new phone, it's generally best just to have the one iTunes account

  • How can I Cut & paste an address from one address book to another on my PC.

    My work computer has 3 address books - 1 personal address book, 2 collected address book, 3 work related address book.
    After a couple of years I would like to tidy up my address books & cut & paste some of them from here to there. However there seems to be no cut & paste or copy & paste feature that I can locate anywhere????
    I can't drag & drop an address from one to another either.
    Can anyone please help
    BevN

    Cut and paste a whole contacts information has never available because it entails different components. Cut/Copy and paste has always been available if you are only selecting one part of the information, but this means you have to open a specific contacts Properties.
    '''How to drag and drop contacts between address books:'''
    In the left Directory Pane, select the address book containing the contact you want to move. You should see a list of contacts in the right Contact Pane.
    Drag & Drop process:
    * Left click and hold down on a contact in the list to grab, then drag that contact to the left and hover over the address book where you want to put the contact. Then release the mouse button to drop into that address book.
    You can move more than one contact.
    * Hold down 'Ctrl' key and use mouse to select and highlight various contacts.
    * then use the D&D process - (left click, hold down on any highlighted contact to grab all highlighted contacts).

  • How can I get the image data from Clipboard with LV

    Anybody knows How can get the image data after pressd "print screen button" with LV?
    I want to program a software which can save a image as a bmp or jpeg etc, and the image data is from pressed print screen button. 
    How to get it out from clipboard. I am trapping about. thanks in advance.
    Try to make everything Automatic

    You can have a look at Rolf Kalbermatter's post here (give him stars) or, if you're using scripting, you can use the Application class Get Clipboard Image method.
    Try to take over the world!

  • How can I read the trace data from Agilent(HP​)8510C in C++ using NI488.2 and PCI-GPIB ?

    Hello! I am trying to develop an application in C++ for measurements with Agilent(HP) 8510C network analyser using NI488.2 and National Instrument's PCI-GPIB card. In HPBASIC the trace data is read using OUTPDATA command which contains PREAMBLE, SIZE and then the data string in real and imaginary pair for the required points. The ibrd function gives data only for one point. Kindly guide me how I can read the whole trace and and separate out the real and imaginary data values. Regards, kapil

    Hey Kapil,
    It seems that in HPBASIC you were using an instrument driver for the 8510C. OUTPDATA is not a native HPBASIC function. National Instrument has similar instrument drivers for LabVIEW and CVI.
    http://zone.ni.com/idnet97.nsf/9b2b33e1993d8777862​56436006ec498/7b235254f3881ddb862568ab005fbd2e?Ope​nDocument
    http://zone.ni.com/idnet97.nsf/9b2b33e1993d8777862​56436006ec498/24ca7db880ab78ae862568ab005fbc0f?Ope​nDocument
    For example in the CVI instrument driver you will find a source file called hp8510.c. In the source code you will find a function called hp8510c_dataInRaw that sounds similar to the function that you described.
    Note that this example is designed for CVI, but it is possible that you could extract the information you need for C++. If
    you had a copy of CVI you could just add the files downloaded from the instrument driver to a project and then compile and run the project. It already contains a ready to run example that allows you to capture data and use your instrument.
    If you want try CVI you can download an evaluation copy on-line at http://ni.com/lwcvi/launch.htm.
    I hope this helps out,
    JoshuaP
    National Instruments

  • How can i make the Master data extractor to delta enable

    Hi,
    I am working on 0EQUIPMENT_ATTR(Master data).
    I want to load the data to ODS,
    By default SAP has not provided delta for this Object.
    can anybody know how to make this 0EQUIPMENT_ATTR to delta enable.
    or any other solution.
    its urgent..
    help me
    Madhu

    Hi dear and welcome on board !
    If a std datasource is not available in delta mode, you cannot change it in order to deliver a delta...if you consider your requirement absolutely necessary, you can go for a generic datasource (RSO2) and try to set a generica delta...
    Hope it helps!
    Bye,
    Roberto
    ...please don't forget to reward the answers...it's THE way to say thanks here...

  • How can I transfer my iTunes data from one computer to another? PS. My old computer won't turn on

    I Recently bought a new computer and I need to transfer all my iTunes data from my old computer to the new one, how can I do that? And by the way, my old computer won't turn on

    Hello Nousernamebrah
    Well get get your music from your old computer to your new computer, the old computer would have to work and turn on to access the files to be copied over. You also can access any previous purchased music and download it to your new computer as well. Check out the articles below for more information. 
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    Download past purchases
    http://support.apple.com/kb/HT2519
    Regards,
    -Norm G.

Maybe you are looking for

  • System can't find apple loops (accidentally pressed Re-index button)

    Hi, I installed some new loops lately but because the installation was not successful, when i tried to listen to one of the loops (which was not properly installed) an option came up asking me if i wanted to re-index my loops. I accidentally pressed

  • Firefox is freezing, then only showing a white blank screen when I try to load it.

    Ok, I have not had any problems with firefox, I was logging on it all the time, everyday, etc... with no problems until today. Today when I went to log onto the net, firefox opened, and it looked like everything I had customized from tabs, bookmarks

  • Chatserver not working like it should

    Hi I have created a chatserver and a chatclient where the chatserver is running as a multithreaded server where is can receive multiple requests at a time instead of only being able to handle one request at a time. When i start up the server, it work

  • Persistant troubles, before and after reinstall and formatting

    Hi, I have a 2ghz Macbook Pro with 1gb of Ram. Up until recently it was running the most recent version of 10.4, but one day recently a number of files were corrupted (not sure how many or how) leading to frequent startup troubles. I would start up a

  • Calculation in a condition

    Post Author: rohan_ferns CA Forum: WebIntelligence Reporting All, Pretty novice user of WebI. I'm currently running a query in my WebI inbox which prompts user to enter year and month as takes these inputs to give the final output. Is there a way by