How can we trigger the BAdI MD_PIR_FLEX_CONS in a MTS strategy

Hi All!
We have 5 Plants: 4 commercial plants and 1 production plant.
The sales orders are created in the commercial plants with a Make-to-order with consumption Requirements type; (Individual customer stock is an issue of the client).
Planned independent requirements are entered at finished product level with Consumption indicator for planning requirements 4 - Flexible Consumption for Different MRP Elements (BAdI); we create the purchase order (L - Subcontracting) for the finished product based on the PIR.
We need to do the consumption and reduction of planned independent requirements based on the purchase orders creation or in the Goods Receipt for the Outbound Delivery.
We implemented the BAdI MD_PIR_FLEX_CONS but the BAdI isnu2019t trigger for Planning strategy 10 or 40 but. The BAdi is trigger only when Requirements class of the Requirements type of independent requirements as value 2 (Consume planning w/o assembly) in the Consumption indicator and value 3 (Single-item planning) in the Planning Indicator.
How can we trigger the BAdI in a MTS strategy u2013 The BAdI documentation doesnu2019t mention that can only be used in MTO strategy?
Thanks.
Regards.
Adelino

Hello Adelino
Strategy 10 is a special business case without consumption and only with the PIR reduction during the delivery (goods issue). You can see in customizing OPPS that both requirements KSL and LFS are set with "No consumption with customer requirements". In this case, BAdI MD_PIR_FLEX_CONS is not called.
The BAdI can be used with strategy 40, so please make sure that the consumption indicator of the PIR is set to '4 - Flexible Consumption for Different MRP Elements (BAdI)'.
BR
Caetano

Similar Messages

If i Know the Interface name of the badi ,how can i know the badi definitio

Hi Experts,
1. If i Know the Interface name of the badi ,how can i know the badi definition name?
2. And also if i know the name of the implimentation class,how can i know the implimantation name and definitin name
Thanks&Regards
Ramakrishna L

Hi,
in order to find BAdI definition starting from the interface, you should perform a "Where used List" from SE24.
Type your interface name and then, in the where used dialog box, tick the 'Business Add-in" check box.
1.But is there any table which stores Implimentation name and Implimentation class name?
2.And also any table that stores BADI Definitiion name and Implimentation names.
1. SXC_CLASS table; Exit, implementation side: Class assignment (multiple)
2. SXC_EXIT table: Exit: Implementation side: Assignment: Exit - Implementation
Regards,
Andrea

How can i trigger the workflow from REPORT

hi,
my requirement is, whenever Z... Report Is generated there is Icon called print. the write the code for printing icon. if printing Icon fails the workflow will be trigger.
how can i trigger this from report. and i send attachent of report with mail to next person to sap inbox.
pls let me know.
pls give any documentation if you have.
thanks & Regards
Sankar.

Hi,
Workflow container
swc_container        lt_container.
swc_create_container lt_container.
swc_set_table lt_container '<cont_name>' lit_int_tab.
CALL FUNCTION 'SWE_EVENT_CREATE'
    EXPORTING
      objtype           = lc_objtyp
      objkey            = lv_objkey
      event             = lc_event_name
    IMPORTING
      event_id          = lv_eventid
    TABLES
      event_container   = lt_container
    EXCEPTIONS
      objtype_not_found = 1
      OTHERS            = 2.
IF sy-subrc <> 0.
    yv_err_flg = gc_true.
    EXIT.
ENDIF.
Rgds,
Prakash

How can I active the BADI Z_ME_PROCESS_PO_CUST in SAP ECC 6.0?

Dear all,
I have created new BADI Z_ME_PROCESS_PO_CUST in spro :Materials management=>Purchasing=>Business And-ins for Purchasing=>Badi:Enhance processing of Enjoy purchase order
But I can not active this BADI in se19. SAP give me an information:Implementation Z_ME_PROCESS_PO_CUST migrated (see long text for instructions)
Enhancement Implementation:Con_FIN_Subcontract ,I don't know how to do ?
Could you please give me some help.
Thanks in advance.
Best Regards,
Merry

Hi Merry,
I encountered the same problems as you,
I want to say when we changed the 'Multiple use' is selectd system is not problems?
What can you do it ? can you share your's experience on here ?
BAdi - ME_PROCESS_PO_CUST 不能触发
Thank you very much !
Regards,
Alex

How can i active the BADI 'LE_SHP_GOODSMOVEMENT' in IMG?

I have try LE_SHP_GOODSMOVEMENT in my IDES,it can work.
But when i goto the develop enviorment,creat a new customer BADI and activeit.
When i come to DEBUG mode,it can not be touch off.
I guess the develop enviorment do not configure this BADI Defination.
How can I handle it?
In T-CODE SPRO?
Or any other.
Tks a million~~~

Hello,
Hope you implemented the BADI in SE19 and activated the Method which u implemented within the BADI .
Would you please activate the Implementatin of the BADI also .......(Better go to se80 and provide u r implementaion name activate everything and come to SE19 activate the BADI IMplementation )
Regards

How can we trigger the notification from SAP backend system to SMP3.0.

Hi All,
Can any one help me to know is there any standard approaches available to get notification from SAP backend system to SMP3.O server after any event that has been triggered.
Any of suggestion related to above will be helpful.
Thanks,
Anjali

Hi Ekansh,
I have few more question regarding push notification from backend.
Refferd Link:-http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40ab6d83-b7b8-3010-65bc-d7a08f0f35f3?QuickLink=index&…
Pushing Notifications Made Easy!!! : Push a Notification
Have perform all the steps till creating RFC Destination to mobile platform by creating a new push service.
I just wanted to have a clarity on target host that we are specifying should also have SMP3.0 server installed???
Actually I am using http listener downloaded from membrane site which is running on that target host machine.
But I am unable to get any response in my listener.
Even wanted to know the necessity of exchange of certificate for SSL Connection.
SMP server Certificate exchange with SAP Backend and SMP server certificate exchange with HTTP Listener????
Because currently I am trying to have a notification from SAP Backend directly to HTTP Listener without having SMP server.
Can u please correct me where I am going wrong.
Thanks & regards,
Anjali Agrawal

How can we take the cursor to a different sub-screen from the BADI?

Hi,
We have to do some validation on Header, Operation and Relationship of any work order (IW31, IW32). We have checked that validations can be done at BADI WORKORDER_UPDATE in the method u2018AT_SAVEu2019. But user wants us to take the Cursor back to the field and screen due to which the error is coming. How can we take the cursor to a different sub-screen from the BADI?
Thanks in Advance,
Pranav

You 'ran out of room' because you tried to put your entire question into what is the 'Topic line' of the post.
This is a fairly common error, as a scan of the topic list will show, and likely due to a design flaw in the layout of the composition page.
Most posters who make this error do so on their first post, and are able to avoid a similar misstep on their second and subsequent questions.
Regards,
Barry

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

How can i write the trigger for Global Temporary Table

Hi Grus,
How can i write the trigger for Global Temporary Table.
I was created the GTT with trigger using the below script .
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
trigger was create successfully, but the wouldn't insert into to EMPNAME Table..
Please guide whether am correct or not? if not kindly give a correct syntax with example
Thanks in Advance,
Arun M M

BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
you are referencing old value in insert stmt.
BEGIN
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
END;then run ur application it works fine...
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
dbms_output.put_line(:OLD.EMP_C_NAME||'yahoo');
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
dbms_output.put_line(:OLD.EMP_C_NAME);
END;
create table EMPNAME as select * from GLOBAL_TEMP where 1=2
insert into GLOBAL_TEMP values('fgfdgd');
commit;
select * from GLOBAL_TEMP;
select * from EMPNAME;
output:
1 rows inserted
commit succeeded.
EMP_C_NAME
fgfdgd
1 rows selected
EMP_C_NAME
fgfdgd
1 rows selectedgot it Arun
Edited by: OraclePLSQL on Dec 28, 2010 6:07 PM

I can't open my gallery after i migrate the iphoto! How can i fix this bad problem?

HI,
I can't open my gallery after i migrate the iphoto! How can i fix this bad problem? Flz help me!!

Try repair permissions with Disk Utility
Regards
TD

How can i find the exact BADI For a Particular Transaction

hi ppl,
How can i find the exact BADI For a Particular Transaction. Is there any Standard transaction or Programs to do this or suggest some other way.

Use this code:
*& Report ZGET_BADI
REPORT ZGET_BADI.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
*Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
*Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
*For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Regards
Vinayak

How can I open the windows file directory in "WHEN-BUTTON-PRESSED" trigger

Dear All,
How can I open the windows file directory in “WHEN-BUTTON-PRESSED” trigger?

Blessan Joseph,
The solution is dependent on your Forms version and if your applications is traditional Client/Server (CS) (Forms 6i and lower) or web deployed (Forms 6i and higher). For CS, you would use the Get_File_Name() built-in as Faa demonstrated. For Web, you will need to use the WebUtil library function Client_Get_File_Name() as Sarah (OGIR) demonstrated. Both of these functions will return the full path to a file. Note: WebUtil is an external library so it requires you to perform some configuration on your developer client as well as on the Application Server. WebUtil is included with Forms 9i and higher, but you must download it for Forms 6i.
My requirement is user should able to select windows directory for the output.Do you really need to allow the user to write to a file in the Windows directory? This is very dangerous and you should not allow users or programs to write to the Windows directory. Users should only be able to write files to "User" directories (\My Documents\<Directory name>).
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How can I update the trigger table?

I need a insert trigger on a table and also wants to insert the result value in one of its field.
it gives mutating error........
so wots the way of updating it? how can i update the same table.

For example like this (inside the BEGIN/END section of the trigger):
:NEW.Col2 := :NEW.Col1;
C.

Need help badly!! how can i use the front camera i...

guys, i need help with the front camera of my device
how can i enable the front camera of nokia N900 to shoot photos or videos,
this problem is really bugging me...
need help badly...

You can't.. it is terrible..
the only app that really uses it is mirror
Open this link on your phone to install mirror
http://maemo.org/downloads/product/raw/Maemo5/mirror?get_installfile
the camera firmware is bad, so the image quality is truely terrible.. play with mirror to see.. it may be fixed in a future firmware release (it *IS* better than it was.. the firmware last year had a line through the picture!)

I downloaded bundle for ms office only to realise its just a template.my questions are can i be refunded and how can i get the right msoffice because am in need of it badly

i downloaded bundle for ms office only to realise its just a template.my questions are can i be refunded and how can i get the right msoffice because am in need of it badly

You can request a Mac App Store refund at reportaproblem.apple.com
You can buy Microsoft Office at office.microsoft.com

How can we trigger the BAdI MD_PIR_FLEX_CONS in a MTS strategy

Similar Messages

Maybe you are looking for