How can we trigger the notification from SAP backend system to SMP3.0.

Hi All,
Can any one help me to know is there any standard approaches available to get notification from SAP backend system to SMP3.O server after any event that has been triggered.
Any of suggestion related to above will be helpful.
Thanks,
Anjali

Hi Ekansh,
I have few more question regarding push notification from backend.
Refferd Link:-http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40ab6d83-b7b8-3010-65bc-d7a08f0f35f3?QuickLink=index&…
Pushing Notifications Made Easy!!! : Push a Notification
Have perform all the steps till creating RFC Destination to mobile platform by creating a new push service.
I just wanted to have a clarity on target host that we are specifying should also have SMP3.0 server installed???
Actually I am using http listener downloaded from membrane site which is running on that target host machine.
But I am unable to get any response in my listener.
Even wanted to know the necessity of exchange of certificate for SSL Connection.
SMP server Certificate exchange with SAP Backend and SMP server certificate exchange with HTTP Listener????
Because currently I am trying to have a notification from SAP Backend directly to HTTP Listener without having SMP server.
Can u please correct me where I am going wrong.
Thanks & regards,
Anjali Agrawal

Similar Messages

How can i trigger the workflow from REPORT

hi,
my requirement is, whenever Z... Report Is generated there is Icon called print. the write the code for printing icon. if printing Icon fails the workflow will be trigger.
how can i trigger this from report. and i send attachent of report with mail to next person to sap inbox.
pls let me know.
pls give any documentation if you have.
thanks & Regards
Sankar.

Hi,
Workflow container
swc_container        lt_container.
swc_create_container lt_container.
swc_set_table lt_container '<cont_name>' lit_int_tab.
CALL FUNCTION 'SWE_EVENT_CREATE'
    EXPORTING
      objtype           = lc_objtyp
      objkey            = lv_objkey
      event             = lc_event_name
    IMPORTING
      event_id          = lv_eventid
    TABLES
      event_container   = lt_container
    EXCEPTIONS
      objtype_not_found = 1
      OTHERS            = 2.
IF sy-subrc <> 0.
    yv_err_flg = gc_true.
    EXIT.
ENDIF.
Rgds,
Prakash

How can we get the message from sap system to 3rd party system

it is related to XI only .if yes u can configure Java proxi-XI-BAPI or call the bapi directly in synchronous mode which can give u return message in BAPIRET.
can u give the proceser step by step.. plz..
thanks and regards,
suresh

Hi,
Aout Proxy , you can go thru these-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
http://help.sap.com/saphelp_nw04/helpdata/en/87/5305adc23540b8ac7bce08dbe96bd5/content.htm
Regards,
Moorthy

How can we remove the commas from the Formula value in SAP BW BEx query

Hi All,
How can we remove the commas from the Formula value in SAP BW BEx query
We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
Regards
Venkat.

Do you want to remove the commas when you run the query on Bex Web or in RSRT?
Regards

How Can we get the data from Non-SAP to SAP in WebDynpro

Hi,
I hope u understand my query, How can we get the data from Non-SAP to SAP thru WebDynpro Programming.
Help out with the steps for getting the data or procedure.
Regards,
Mutyapu

You can expose the APIs in the Non-SAP backend as Web Services, and consume them in SAP by creating an Enterprise Proxy. Then these can be called just like normal class methods from Web Dynpro.
Regards,
Nithya

How can I remove the "Notifications" icon from the Menu Bar in OS 10.9?

How can I remove the "Notifications" icon from the Menu Bar in OS 10.9?

As far as I can tell, this is your best option: http://reviews.cnet.com/8301-13727_7-57608829-263/how-to-turn-off-notification-c enter-in-os-x-mavericks/

How can we Transfer The Assets From Legacy to SAP

Hi Experts,
how can we transfer the assets from legacy system to sap when business in production ,what is the procedure for transfer the assets.
Regards,
Harish

Hello Harish,
Please kindly refer to SAP Libray for more information about
intercompany transfer.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4f/71e18a448011d189f00000
e81ddfac/frameset.htm
-> Asset Accounting (FI-AA)
->Other transaction during Life of an Asset
->Intracompany and intercompany Asset Transfer
   ->Intercompany Asset Transfer(Between company codes)
Please also refer to following notes and SAP library for further.
information.
310346 ABT1 Defining transfer variant gross
327088 Definition of the delivered transfer variants
http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/1d3c3934f18443e1000000
0a114084/frameset.htm
-> Asset Accounting (FI-AA)
->Other transaction during Life of an Asset
->Intracompany and intercompany Asset Transfer
   ->Intercompany Asset Transfer(Between company codes)
    ->Automatic Intracompany Asset Transfer
     ->Transfer Variant
I hope this helps,
regards
Ray

How can i autoforward that mail from SAP INBOX to the outlook

Hi ,
My Requirement is that,
I have to send an email to outlook, whenever PO Created in SRM System
I have created custom workflow, i have added a sendmailtask step, i given the SAP userid to send SAP Mail to the user.
It is sending SAP Mail to the User to his inbox perfectly.
Now, how can i autoforward that mail from SAP INBOX to the outlook. This is has to work for all users.
Please give some suggestions. ot it can be achived any other way.
Note: This is Email Message not a workitem.
I have doubt that RSWW program will work only for workitems.*
Thanks & Regards,
Suresh.

Hi ST,
what I understand from your requirement is that you are able to send messages using SendMail Step to SAP Inbox and now you want it to be sent to users Outlook.
Here you need to create a container which would store users email address of Outlook (which would be stored in SU01 or in a ztable), use this container in your Send Mail step and in the Recepient Type as email.
Hope it helps.
Aditya

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

How can i access the EJB from a Webdynpro

Dear all,
How can i access the ejb , from a webdynpro?.
Is there any way to do that?.
I want to write the entire code (business functions) within the EJB and i wan to access the entire methods from a WebDynpro Application.This is the situation.
Please help me to , resolve this problem.(Here im using JDBC Connection .. etc.).
I want to do the basic connection setting's and data retrieval part within the EJB and use that within the WebDynpro..
how can i seperate this two(i mean, i want to seperate the JDBC connections and WebDynpro,i dont want to hard code any connection parameters within the webdynpro code)
So that i want use that saet of particular function's in many webdynpro applications..
(i dont need any help regarding webservice way.)
If anyone can , please help me..
I tried that javabean class , manifest file , that way (importing javabean model).
but im getting errors.
I cant properly utilize that..
So please help me with steps regarding that,,
for javabean
and if any , for EJB also..
with regards
Kishor.G

HI,
Since webdynpros follows Model View Controller Architecture You can access EJBs in webdynpro(views/frontend) infact to connec to database uding JDBC you have to utilise EJB ( opening connection to database closing, and other Business functionality).See this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/web dynpro tutorial and sample applications.faq#q-7
<b>How to access the Car Rental Web Service?</b>
Regards,
RK

How can i convert the data from mutiple-table to the other database(MSSQL)?

Dears,
How can i convert the data from mutiple-table to the other database such as MS-SQL?
I have a third party system based on MS-SQL 2000.
Now we want to make a integration between SAP R/3(Oracle) and SQL server.
When my user releases the purchase order in R/3, the application we coded will convert the releated data to the temp database on the SQL server.
But i don't know which tools will help me reach the purpose. BAPI, LSMW, IDoc... ???
Would anybody tell me which way is better and how to do?
Thanks a lot!
Kevin Wang

Hello Kevin,
The question to use which method depend on your detail requirements. If you use BAPI, you need to find which Bapi can provide the data you want. Bapi normally use as a function called by external system. So you need to develop an external program like VB/Java to call this Bapi and move it to SQL. LSMW is use when you want to upload data from an external system to SAP. So it does not serve your requirement. Idoc can be use to export data to an external system. Again like Bapi, you need to find what Idoc can provide the data you want. However, it does not any programming from the external system. If I were you, based on your requirements, I think writing an Abap program that read the data you want and download it to NT/SQL server will be faster and easier.

How can I extract the data from Xstring .

Hi Gurus ,
How can I extract the data from a XSTRING .
I have to get the data which is filled in the survey form the data is getting saved in form of xstring .
Someone told me that there is a standard FM for that . but I am not able to find .
Please reply with the FM in case some one knows about it .
Thanks in advance .

The following code works as of 7.0 (in any SAP system):
FORM XSTRING_TO_STRING USING input TYPE xstring CHANGING output TYPE string.
TYPES : BEGIN OF ty_struc,
          line TYPE c LENGTH 100,
        END OF ty_struc.
DATA lt_char TYPE TABLE OF ty_struc.
DATA length TYPE i.
length = xstrlen( input ) / cl_abap_char_utilities=>charsize.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
    buffer                = input
tables
    binary_tab            = lt_char.
CONCATENATE LINES OF lt_char INTO output RESPECTING BLANKS.
output = output(length).
ENDFORM.
Edited by: Sandra Rossi on Mar 30, 2010 12:24 AM

How can i store the data from the list to MS-Access?

Hi all,
We all know that from alv it is possible to export data to Ms-excel or word or text file. Can anyone tell me how can i store the data from alv or reports to Ms-Access?
Thanks in Advance,
Abhijit

Hi,
If you want that without code, i suppose there is a option in MS-Access to import data from Excel, so you have to first export to excel and then import to Access.
If you want to code it yourself then have a look at FM TABLE_EXPORT_TO_MSACCESS, as said in Exporting Data from R/3 to MS ACCESS
You can also see the search results in SCN for [export data to MS-Access (45 Results)|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=exportdatato+MS-Access&cat=sdn_all].
Regards
Karthik D

How we will pull the data from Sap-Bi to sap-Bpc

Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AM

Tough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection...

How can I calculate the load from all modules in ECC6.0 for our production

Hello Experts,
I have doubt , how can I check the load from all modules like FI, SD, MM, HR, PP, BASIS, ............etc from sap level. Can you explain from which transaction and how to check the workload for each module seperately from sap level. We are wondering about the size utilization of each module. Our production database is R3 ECC 6.0 on Oracle 10.2 on AIX operating systems.
Thanks for your help in this regard.
Thanks & Regards,
Haseem.

Hi
Check in ST07 the application monitor.
Regards
Bhaskar

How can we trigger the notification from SAP backend system to SMP3.0.

Similar Messages

Maybe you are looking for