How can x86 Solaris detect a expanded SAN volume

I have a x86 solaris box (SunOS jdnm01cdr01s 5.10 Generic_137112-02 i86pc i386 i86pc) that connects to a SAN volume with initial 10G space.
I increases the volumn size to 20GB.
Format commands displays the name is updated to 20G.
AVAILABLE DISK SELECTIONS:
       0. c0t600A0B800039BE61000016894ACD4D2Ad0 <SUN-LCSM100_F-0617-20.00GB>
          /scsi_vhci/disk@g600a0b800039be61000016894acd4d2aHowever, the partition tool is still report the wrong size.
Current partition table (original):
Total disk sectors available: 20955101 + 16384 (reserved sectors)
Part      Tag    Flag     First Sector        Size        Last Sector
0        usr    wm                34       9.99GB         20955101
1 unassigned    wm                 0          0              0
2 unassigned    wm                 0          0              0
3 unassigned    wm                 0          0              0
4 unassigned    wm                 0          0              0
5 unassigned    wm                 0          0              0
6 unassigned    wm                 0          0              0
8   reserved    wm          20955102       8.00MB         20971485
format> label
Ready to label disk, continue? yes
partition> p
Current partition table (original):
Total disk sectors available: 20955101 + 16384 (reserved sectors)
Part      Tag    Flag     First Sector        Size        Last Sector
0        usr    wm                34       9.99GB         20955101
1 unassigned    wm                 0          0              0
2 unassigned    wm                 0          0              0
3 unassigned    wm                 0          0              0
4 unassigned    wm                 0          0              0
5 unassigned    wm                 0          0              0
6 unassigned    wm                 0          0              0
8   reserved    wm          20955102       8.00MB         20971485How does it detect the new size?

The disk is running in ZFS and has data on it.
Does it harmful if I modify the VTOC label?
I get the following from the server. Shall I extend the slice up to 41943039?
# prtvtoc /dev/rdsk/c0t600A0B800039BE61000016894ACD4D2Ad0s2
* /dev/rdsk/c0t600A0B800039BE61000016894ACD4D2Ad0s2 partition map
* Dimensions:
*     512 bytes/sector
* 41943039 sectors
* 20971452 accessible sectors
* Flags:
*   1: unmountable
* 10: read-only
*                          First     Sector    Last
* Partition Tag Flags    Sector     Count    Sector Mount Directory
       0      4    00         34 20955068 20955101
       8     11    00   20955102     16384 20971485

Similar Messages

How can I hide the "home" and "net" volumes in mountain lion

I have a MacBook Pro that I updated to Mt. Lion. The home and net volumes are now visible in the Finder at the root level. They contain 0 bytes of data. How can I make them invisible?

Sometimes it takes me a while to remember this stuff. The issue is that these invisible folders are actually symlinks and not real folders. They behave differently. Here's something that used to work and may still:
Open Terminal in the Utilities folder:
cd /
nano .hidden
Press RETURN after each line. In the editor listing enter, one line each, home and net. CTRL+O to save the file. Now log out and log back in or restart. The files should be invisible.
Beyond this requires downloading the XTools in order to use one developer tool not included with OS X.

How can I fix the top of the volume button that is stuck on my iPad?

The top of the volume button on my iPad is stuck. How can I fix it?

Take it to the Apple store and have them take a look at it.

HT1043 My midi controller sends message thru mainsage to rewired Reason. How can I stop Mainstage from automatically sending volume control and other messages to Reason?

I have assigned the volume control on my Yamaha midi keyboard to a screen control in Mainstage to do a different function. But it simultaneous does my assigned job as well as controlling volumes of instruments in rewired Reason. How can I stop that from happening. I don't want any of my knobs to control Reason. I use touchOSC on my iPhone as a mixer. It also send all soughts of undesirable faders and knob massages through Mainstage to reason. I must point out that, I have disengaged keyboad control in reason preferences.
Every knob on any controller which is sending CC07 message to mainstage automatically controls instrument volume in Reason. Some other CC messages are also sent automatically. How can I stop that from happening?
Thanks in advance.

If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple.

How can I see /tmp on a Network Volume?

So if I'm using Connect to Server AFP volumes when I connect in Finder to the root volume of another machine directories like /tmp are not visible how can I see /tmp and other folders?

That and all the other Unix directories are invisible. They are invisible so that the user cannot access them and because they do not require access by a user. Is there a particular reason why you would need to access /tmp or the other invisible files and folders?
In order to see invisible files and folders via the Finder, you must turn on the capability. You can do that by opening the Terminal application in the Utilities folder, and at the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles Yes
To turn off the feature substitute No for Yes in the command line. There are also numerous third-party utilities that can do this such as TinkerTool and ShowHideInvisibleFiles - VersionTracker or MacUpdate.

How can main vi detect whether sub-vi closes after opening and running it by user?

Hi I learned more using the call by reference node function.
From what I know is that, after opening and running subvi by means of method nodes.
So after running it, "call by reference" node stays active and there is no flow of data coming out of it till it is closed.
However what if I do not want to use this "call by reference" node as I have multiple sub-vis to choose. So how does the main program detect that any one of sub-vi is closed by user?
regards,
Clement

Hi Clement,
first: you may run the vi with the option "wait until completion" set to false, the call-by-reference node will return promptly.
2nd:
There are many options to signal the completion of the subvi to the main vi: globals (easiest, but may lead to race conditions), LV2-style global, queues. You can even check the status of the subvi (running or not) via vi server.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can iPhone browser detect the website keyboard button?

I cant use the keyboard provided by the website (https://www.libertyreserve.com/en/login). That is very important. After the 1st page logon, another page will ask for enter a pin by using the keypad provider but iPhone browser can't detect the keypad value. I have try out many browser eg. atomic, flash, skiyfire, mercury and more but all cant work it out. Hope can get solution from here. Thank you.

but it work fine if using computer to access. My friends who using Samsung and Motorola mobile can use the keyboard or keypad provided without any problem. I so surprise iPhone cant work with this... This make me crazy!

How can I schedule the Ringer and Alerts volume?

On a daily basis, I turn down the Ringer and alerts volume at night so my alarm clock does not wake me up with a super loud alarm. I then move the volume up before going to work so I can hear my phone ring throughout the day. This same routine happens every work day. I was wondering if there's an app that I can use to schedule how this volume goes up or down? kind of like the Do not disturb... any ideas?
Thanks!

jcamber123 wrote:
On a daily basis, I turn down the Ringer and alerts volume at night so my alarm clock does not wake me up with a super loud alarm. I then move the volume up before going to work so I can hear my phone ring throughout the day. This same routine happens every work day. I was wondering if there's an app that I can use to schedule how this volume goes up or down? kind of like the Do not disturb... any ideas?
Get an alarm app that has an independent volume and/or raises the volume over a few minutes (most of them will do this).
Also, you can schedule different alarms for different days (such as M-F then weekends) with different sounds.
I use NightStand -> http://www.thomashuntington.com/iOS/Nightstand_Central.html

Ques: when I synch GB to Itunes, how can I make sure each song's volume...

My wife and I perform live. To make a fuller sound, I recorded a number of bass-and-drum-track songs that I can run off the Ipod into our PA system to play while we're performing. Each song sounds great, but I have a question: I've got the 'songs' in order on the Ipod, but I don't want their volumes to play differently from each other, you know, so I won't have to constantly monitor the Ipod output volume.
Thus, before I synch the GarageBand songs with the Ipod, is there a pretty foolproof way to ensure that each song is the same volume as the others? I'd sure appreciate any help on this...thanks.

Volume (or rather loudness) is a subjective measure. You can check the box in GB's prefs that makes sure all the songs are normalized - but then they all tend to be less loud. The best way is to make sure you have a good level in GB and use some mastering techniques like compression to max out the subjective loudness.

How can I enable Spotlight on an AirDisk volume?

Hi everyone,
I've had a 2 TB external drive connected to my AEBT for a few months and I've been happy offloading stuff there. The problem is that now, I can't find anything... It's not that it's not neat: I've categorized stuff in folders but this can only get me so far and now I find myself NEEDING TO SPOTLIGHT THERE.
Please, can you help me?
Thanks in advance!

Not possible. Used DEVON's EasyFind to make up for it. Not ideal, but it's better than nothing.

How can I download Acrobat 8 updates on volume licence? I am spending 4 hr. now!

Acrobat 8 can not Support upgrade or update!

you could try adobe support, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

How can I set ACLs on MAC remote volumes.

Hi,
I am having Mac OS X 10.5 leopard as server and 10.4 as client. I have mounted 10.5 server from 10.4 remotely through Apple Filing Protocol(Basically an AFP mount). On the remote mounted volumes I am unable to enable/set the ACLs right now. But I have already enabled the ACLs on 10.5 local volumes before I mount them from different clients.
"sudo fsaclctl -p </Volumes/MACVOL1> -e" is the command used to enable ACLs on the remote MAC Volumes. This one throwed ENOT SUPPORT error. It should not be due to any file system differences, as both are having same file system.
*Basically I want to see an ACL(AFP's FPGetACL/FPSetACL) request going on wire from a MAC client to contact the MAC server.*
I have tried the option of workgroup manager. There the sharing option was dimmed out after the authentication part. And I was unable to add the remote server in the server admin part. I have tried all the options that were suggested in various threads. But nothing worked out.
I am looking out for some simpler solution to see the ACL request coming from a Mac client directing to a MAC server.
Thanks,
Yogesh.

Any suggestions please...

How can l keep the same track mixer volume levels in logic when bouncing a project ? HELP !!!

When l bounce a project, all of the mixer levels return at the defult level automatically, they do not stay at the levels l require (levels l have previously set for each track). Which means l do not get each track at the volume l need when it is made into an mp3.
Below is an example from a help-discussion website with someone who has the exact same problem as me. However, none of the suggestions the people have made on it will resolve the on-going problem for either of us :
http://www.logicprohelp.com/forum/viewtopic.php?p=374597 (there is a clear explanation of the problem on this link with helpful screen shots)
Any help, suggestions or advice would be much appreciated.
Many thanks.

I gave the most probable cause/solution in that thread:
Open the event list (E), select and remove all MIDI CC [b]7[/b] messages from all tracks/regions.
To select all MIDI CC 7 messages in one region, first select one, then hit shift-S.

How can I change the speaker and listening volume for incoming calls?

When I get calls, I'd rather have them be louder. When I use the speaker feature, same thing. Not loud enough. Help, and thanks!

You're a GOD! Thanks so much.

How can I expand the stage (in one direction) on rollover? Or click?

Hello,
I'm looking to create an expanding/collapsing HTML5 banner using Edge Animate.
For example, say I start with a 728x90 banner. How can I make the stage expand (from the bottom edge) to 728x270?
At the moment I'm looking to expand on rollover then collapse back to original stage size on rollout - but in the future I know I'll want the same functionality using a button.
All help is appreciated, thank you!

I am on the go for the day but here is a quick routine, using the toggle() method.
In your case you can't collapse the etage to 0, otherwise you have no way of getting to the second click.
In my exmple, click anywhere on the stage, it collapses to the minHeight value of 15.
Click it again and it restores to the predefined height of the stage.
var minHeight = 15;
var myStageHeight = sym.$("Stage").css("height");
sym.$("Stage").toggle(function(){                    // run on first click of Stage
    sym.$("Stage").animate({height: minHeight}, 500 );
}, function() {                                                   // run the second click of Stage
    sym.$("Stage").animate({height: myStageHeight}, 500 );
If you are going to apply to an element, say a button, then its going to require you to move (flow) the button to the collapsed position.
I'll play with that notion later, when I get back.
Try the above
hth
Darrell

How can x86 Solaris detect a expanded SAN volume

Similar Messages

Maybe you are looking for