How can you change the volume level????

Hi all:
I don't know if this is possible but sometimes I want to reduce or increase the volume level of several clips (10 or 20) by the same amount while they are linne up in the timeline, they are individual clips arranged back to back during the edit.  I want to either up the volume by 10db or down 10db from baseline 0db.
Do I have to do it induvidually or is ther a way to select them and apply the change to all of them at one time.????
Your input is appreciated
Thanks,
AppleLou

And to go a step further, put them all into a Compound Clip, and you can apply a single filter to them all at once, plus keyframe your audio over time to them all at once.

Similar Messages

  • Crrystal Reports using ADO.  How do you Change the Isolation Level?

    Post Author: jmetaxas
    CA Forum: Data Connectivity and SQL
    Crrystal Reports using ADO.  How do you Change the Isolation Level?  I found a knowledge base article that allows you to change it for ODBC.   But nothing on ADO.  I kicked around changing the reports to ODBC but even then the keys described in the article do no exist.  Any suggestions?
    Thanks,
    John Metaxas

    T-Bob wrote:
    I want to make sure that points 2&3 are at the same level, so I can just move the envelope region between them up and down to change the volume. Any quick way to do this to speed up my process?
    Specifically to address this point: if you mouse over the audio levels' rubber band segment BETWEEN your points 2) and 3) until the cursor changes to an up/down adjustment arrow ⬍, and move it up/down, it will adjust BOTH the levels at 2) and 3), maintaining the relative difference between them (or, if points 2) and 3) start at the same level, this adjustment will keep them equal as you drag them both up/down together in one action.)
    As usual, much easier to DO it, rather than describe it!

  • I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

    Hi
    I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
    TY!!!!

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

  • How Can You Change the Look and Feel of Charts in OBIEE 11g

    How Can You Change the Look and Feel of Charts in OBIEE 11g?
    Edited by: user11973122 on Jul 18, 2012 12:13 AM

    Check these files
    OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\s_blafp\viewui\chart\dvt-graph-skin.xml
    OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\views\dvtchart\obips.dvtchart.xml
    OFM_HOME\Oracle_BI1\bifoundation\web\display\chartfontmapping.xml
    Pls mark correct or helpful if helps

  • How can you change the bubble color in the message app on the iphone 5

    How can you change the bubble color in the message app on the iphone 5?

    If you are having trouble reading your texts you can increase the font size until it becomes clear. Put in a feature request for the colour change though, it won't happen unless people ask for it.

  • How can you change the font size in the application and system headers?

    How can you change the font size in the application and system headers?  I searched the system and finder prefs to no avail.  Changing the screen density is not a good option.
    Thanks

    I downloaded Tinkertool.  Found the font section and increased the size of most selections.  The only thing that changed that I can see is the window label.  The apple line, bookmarks line, the tool bar in safari are all the same---font size of about 4.  Found the finder "show view options" but that didn't seem to change anything either.  I'll keep working.  Restarted all apps after changes as well.

  • How can you change the banner of the FTP-server on the Linksys WRT610N ?

    Dear readers,
    My question is this : How can you change the banner of the FTP-server on the Linksys WRT610N ?
    At present it says : "Welcome to WRT610 Router's FTP service" which gives away the type of the device.
    Which is a clue I would rather hide. Besides that I would like to change it to something more personal.
    But how do you do that ?
    The UG is silent about this.
    Regards
    John

    Try this to change FTP banner?
    * Login as admin
    * Open Internet Information Services (IIS) Manager
    * Expand FTP sites (from tree view)
    * Right-click on the particular FTP site, select Properties
    * Click on the Messages tab
    * Setup new message
    * Save the changes

  • How can you change the language in Photoshop [Danish to English] ?

    How can you change the language in Photoshop [Danish to English]?

    Cloud language change http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html

  • I just set up a wireless network using an airport express. How can you change the network name

    How can you change the name of a wireless network set up with an airport express

    Yes, you can. If you use the current AirPort Express, Apple says that you can connect up to 50 devices. Realistically, make that 25-30 or so before the speed really begins to drop.
    Remember that you will have to reset the modem though, before you connect it to the AirPort Express as the modem "remembers" the settings for your computer.

  • Can you change the volume display at bottom of screen to the song time instead?

    I have just bought a new Ipod Nano and really like it!  The only problem I'm having is when playing songs the bottom of the screen shows the volume level rather than how far it is through the song in time (like the old nanos used to show).  I find it really annoying not knowing at a quick glance how much more of a song is left to play.
    I know this info is displayed by double tapping the screen (although it is only shown temporarily).  Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
    Thanks in advance.

    Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
    There is not.  You can let Apple know how you feel about it using the form on this page.
    http://www.apple.com/feedback/ipodnano.html
    B-rock

  • How can you change the display size on the task bar

    how do you change the display size on the task bar

    If, however, you want to change the size of the display of the menubar, meaning make the icons and text larger, there is no way to do that directly other than to change the resolution of the screen.
    You can change the as-viewed size of that temporarily by using either -
    • Mouse zoom - if you have a Magic Mouse (Apple wireless mouse), hold down the Control key and use the scroll up and scroll down finger gestures on the mouse.
    • Zoom - go to System Preferences > Universal Access > Seeing and turn on Zoom. You can also use the noted keyboard shortcut to enable/disable this Zoom feature.

  • How can I change the log level of Sun Clsuter software?

    Hello,
    Now we have a problem about Sun Cluster.
    But we cannot isolate the cause.
    So we'd like to raise the log level of the cluster software.
    I think we can do it.
    I'm soory that we don't have any manuals about SUN here
    And this is an aregent issue
    Please let me know how to change the log level.
    Thanks in advance.
    Masaharu Nakashima.

    I am not sure I understand your question fully. Are you referring to SC2.2?
    The man pages of the sun cluster commands is included in the product. You may want to look into those for any command line options.
    Set your MANPATH environment variable to /opt/SUNWcluster/man.
    Thanks
    Sujeet

  • Can i change the volume level for just a part of a track?

    i am trying to raise the volume level for just a little section of a track without raising the volume for the whole track, just a one little section. can i do that on garage band? how would it do that?

    Yes you can
    On the track instrument selector, there is a row of small buttons, one being an upside down triangle. Click the triangle to display Automation. The default controller is Track Volume. You will see a bright green line which is the volume level throughout the track..
    Simply, go to the location where you want to reduce the volume, click on the green line to insert a control point. The first click is used the maintain the current volume. Go to the point where you want the volume to be reduce to, and click-and-hold the line and drag the new control point to the target volume.
    NOTE: Use the Shift key to adjust incremental amounts.
    Have fun!!

  • How can you change the thumbnail selected for an Album in Photos?

    I'm having difficulty changing the photo that is automatically selected as the thumbnail on an iPad Air and iPad Mini.  How can I change this, and what parameter governs which photo is selected?
    There are a number of threads about changing the name, the creation date, the modified date, and none of those have worked for me.  After changing these various parameters, I have unsynced and resynced photos, and at this point, it is becoming an obsession of mine to change this. :-)
    I would appreciate any input if you've been able to do this in iOS7 and Maverics.  Thanks in advance!
    - Robert

    Okay, now it is working. I had to save the XLSX-file into the older XLS format, but that seems to work quite well.
    But I won't ever understand why InDesign loses its backward compatibility from one version to the other.
    Thank you, -hans-.

  • How can you change the location of the iCloudDrive folder from it's default location assigned when downloaded.

    I recently downloaded the iCloudDrive folder for PC to keep my files up to date amongst my devices. I want to move the iCloudDrive folder from my default location "Jordan" to another folder I have saved on my PC. However, when I do so, the folder looses it's internet capabilities. It therefore does not automatically upload to my cloud storage, files that I add to the relocated folder. This function only seems to work when the folder is placed in "my personal folder": "Jordan". How can I move the iCloudDrive folder to a different location on my PC AND continue using it with internet functionality?!

    You cannot control, how the printed score will look. It is not supposed to be a tool for musical typesetting - only a convenience to be able to check your midi tracks quickly. You cannot even control, how the notes will be assigned to the staffs with the bass cleffs or treble clefs.
    Use other programs for better typesetting your musical scores, e.g.Finale.

Maybe you are looking for

  • [SOLVED] Wireless connection fails after upgrade to dhcpcd 6.2.1

    After upgrade of dhcpcd 6.1.0  to 6.2.1 three days ago (pacman -Syu) my wireless connection fails: deauthenticating from ... by local choice (reason=3) # uname -a Linux localhost 3.12.9-2-ARCH #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014 x86_64 GNU/Li

  • Installation Adobe Premiere Elements not working

    I'm trying to install the Adobe Premiere Elements 13 but it's not working. I downloaded the file for the trial version, after downloading i also had to download something called Akamai netsession Client ? I dont know what it is, but i installed it as

  • LDAP Authentication / User-Role in a database (Weblogic Security)

    Hi, I would like to configure the Authentication with an LDAP Server (LDAP Authenticator) and the mapping between users and roles in an external database. I saw the following post, http://biemond.blogspot.com/2008/12/using-database-tables-as-authenti

  • Oracle 11g - How to repair block corruption(on free space) in datafile

    Hi, I have a tablesopace with 3 datafiles, out of which one datafile has corrupted block. But no objects or data is affected as the corrupted block os in free space. This was shown in the alert logs. Please see below the details: Wed Apr 06 15:30:04

  • Create user who can update another schema table

    Hi, We have a prod system under which we need to update  the application schema by running different update statement and  create/execute function,procedure,package body. This is very easy if you use the owner schema. But i need to run those activiti