How can you create a test plan generator using labview

I am looking to create a testplan generator using labview to help RF Engineers translate test requirements into test parameters and wanted to know how i can go about it.

Have you considered to use Teststand? Teststand organizes all the tests and allows to parameterize them.
Creating a tool with a similar functionality will be more expensive than buying Teststand and modifing the operator interface.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Similar Messages

How can one create a paint color generated from a photo using Kuler?

How can one create a paint color generated from a photo using Kuler?

The best way to remove a pattern is to use a Fast Fourier Transform. There's a free plugin (as well as examples and instructions) here:
http://dl.dropboxusercontent.com/u/6795661/4N6site/improc/fftplugin/examples.htm
Using the plugin requires editing the individual colour channels, which PSE does not natively allow. You'll need the reasonably-priced Elements+ addin:
http://elementsplus.net/
Here's a crop at 100% of the result I got:
The pattern is much reduced. With some experimenting, you can probably do a little better.
Ken

How can you create a spry menu bar with no background colour?

How can you create the first level of a spry menu bar to have no colour? I have a coloured background right now and the colour matches when you load the site in Internet explorer but does not match in Firefox. Any suggestions are welcomed on how to fix this.
Thanks!
HK

Here is the site:
http://partnersnaturally.ca/
I am learning with code, (obviously) so any feedback would be nice. I use dreamweaver CS4, but when I originally designed the site it was in a much older version of dreamweaver. I wonder if that could also be a cause. (besides human error)
Thanks again,
HK

How can you create a writable PDF document from a PPT presentation ?

How can you create a writable PDF document from a PPT presentation ? Upper part with the image , lower part with a free space in order to take notes for students during presentation or course.
Thanks.
B

You can make a PDF file out of you notes and handouts but using the Adobe PDF printer.
Open your PowerPoint Document then go to “File” “Print”
Select ‘Adobe PDF” Printer
Under slides, select which way you want to print. Note it will not print to a printer but to a PDF file.
After then go into printer Properties and Setup PDF properties, do the following: (see second image below)
Default: PDF/A 1-b
Adobe Security: none (change as needed)
Adobe Output folder: Prompt for Adobe file name
Adobe Page size: Letter (change as needed)
Check the following check boxes
View Adobe PDf Results,
Add Document Information,
Rely on system fonts only,
Delete Log files for successful jobs.
Select OK
A pop will ask you where you want to save the document. The file extension should be PDF. After giving the file name select okay and the file should popup as a PDF. Down side is if you want to speaker notes included then you will have to do another file, like wise with just screen shots then combine into one PDF document.
I used Acrobat IX Pro. So to do this you need Acrobat IX or X Pro.
Hope this will help.
Tiger26

How can you create a playlist with music and music video and play those from same playlist through Apple TV?

How can you create a playlist on Ipod touch with music and music video, and play those from same playlist through Apple TV? I can download, create a playlist with both music and music video, stream that through the Apple TV with no problem. The sound and the information show up on the TV, but when it gets to a music video, it only shows the information and "artwork".
I also have a video playlist - videos play fine through the Apple TV, but will not shuffle through all videos - continues to repeat the same one. I have most definitely selected shuffle in both locations - from the playlist and on the ipod video screen while video is playing.

I finally got it... had to sync the photos with the music in iMovie, arrange the voiceover in GarageBand then export to iTunes, and then I was able to put it all together in iMovie and burn in iDVD... had a few glitches along the way but finally finished : )
Message was edited by: jpewald

How can you create a swish pan in Final Cut X?

How can you create a swish pan in Final Cut X?

Andy's - http://andymees.wordpress.com/swish-transitions/
How's that for service?
Cheers!

How can I create an csv/excel file using pl/sql and then sending that file

How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.

968776 wrote:
How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
Whay do you want database (pl/sql) code to do these things?
Anyhow, you may be interested in :
{message:id=9360007}
{message:id=9984244}

How can I create a new entry without using LOV for foreign keys.

Referring to TUHRA sample application based on HR database schema. JDeveloper 10.1.3.0.4
How can I create a new employee without using LOV for the foreign key "job_id".
On the first page I would like to choose the job_title from adf read-only table.
After clicking on the "create new employee button" a creation form appears in which the job_id field is set with previous selection.
Regards M.Winkler
Edited by: user3541283 on 06.10.2008 03:44
Edited by: user3541283 on 06.10.2008 03:50

Hi,
usually the foreign key is only set if the VO you select is dependent from a master. If e.g. you have DepartmentsVO1 that has an EmployeeVO3 as its nested VO, then creating a new instance of employees automatically add the foreign key. If you add EmployeesVO1, which is not dependent to DepartmensVO1, then the foreign key is not set. So if this is the case in THURA (keep in mind that this is not an Oracle demo but a sample used in a book about ADF) then all you need is to take the independent VO when building the new employee form.
Frank

How do you create a stand alone application using DAQmx when your application SCXI hardware isn't on the computer I am using to create the application?

How do you create a stand alone application using DAQmx when your application SCXI hardware isn't on the computer I am using to create the application? The DAQmx assitant won't allow me to create a task with hardware that isn't in my system.

You will need to have at least the DAQ device in your computer to add the chassis. When you add the chassis, don't auto detect the modules. You will have to add the terminal blocks and tell MAX which SCXI module will be connected to the DAQ device. Just make sure you don't test the chassis, when its not there.
I hope this helps.
Joshua

How can i create an apple id without using a visa or credit card

how can i create an apple id without using a visa or credit card

Follow the directions here, EXACTLY:
http://support.apple.com/kb/ht2534

How Can You Track Your Ipod If Lost Using The Serial Number

How Can You Track Your Ipod If Lost Using The Serial Number?

The find my iphone app has nothong to do with it.
That app simply allow you to find other devices using your ipod. It has nothing to do with fining the device on which it is installed.
If you set up the find my ipod feature that is built into your ipod and the ipod is on and it is connected to wi-fi and it has not been restored, then you may be able to get an approximate street address using icloud.
Othrewise, it cannot be tracked.

How do you create and save icc profiles using photoshop?

How do you create and save icc profiles using photoshop?

You don't. Color profiles require specific measurement hardware and software.
Mylenium

How can you purchase additional cloud storage without using account credit?

How can you purchase additional cloud storage without using account credit? Want credit to remain on accounts as it was a gift for my daughter and we haven't finished using it yet but need to purchase additional storage for all of our accounts. Can't I just override the automatic payment from the account and just pay with a separate cc?

Purchasing additional storage will not use account credit anyway. It gets directly charged to your credit card, and you must use a credit card since it is an annual subscription service you are purchasing, not a one time payment option. They insist on a credit card so they have a billable account for the automatic annual subscription fee. At least it was that way when I did it.
Sorry - http://support.apple.com/kb/HT4874 either I did not have enough credit at the time or something has changed since I did it? Maybe call Apple and do it over the phone (explain why you want to do it that way)?

How can i write the data to PIC16F819 using labview?

how can i write the data to PIC16F819 using labview?
Need help!
im using labview in gathering the datas that i need to right to the PIC, then after getting all the datas i am using another program which is ICD2 in order to write it to the PIC. Is it possible to do this task through LV? coz we are spending a lot of time transferring the data from LV to ICD2 manually and its prone to mistake as well.
any suggestion?
thanks,
Pedz

LabVIEW does not currently have a built-in method to communicate with
i2c, but there are other vendors that sell devices to communicate in
this manner with LabVIEW development kits. One that I know of is
from MCC... here is a link: http://www.mcc-us.com
They sell a device called iPort, and then you can buy LabVIEW VIs to go with it. I hope this is helpful to you!
john m

DACF,BC4J: How can i create RowSetInfo from VO generated by createViewObjectFromQuery

How can i create and publish RowSetInfo from VO generated by applicationModule.createViewObjectFromQuery()?
And how can i set named AttributeInfo for
that RowSetInfo?
I can't use VO w/o Entity object generated by wisard becouse in generated code my query will be enclosed to SELECT * FROM (...), and rowsetInfo.setQueryCondition
will add WHERE clause to enclosed select.
(i need to access to inner WHERE clause)
null

I got next exception
oracle.dacf.dataset.DataSourceOperationException: ResultSetInfo: ResultSet TestRS could not be opened because of problems opening one or more attributes.
with next message box:
JBO-25002: Definition SimpleJobber.TestVO of type View Definition not found
Details:
DAC-502: ResultSetInfo: ResultSet TestRS could not be opened because of problems opening one or more attributes.
JBO-25002: Definition SimpleJobber.TestVO of type View Definition not found
for next test code:
private void test() {
final String sql = "SELECT 1+1 X, 1+2 XX FROM dual";
final ColumnInfo x = new ColumnInfo(java.sql.Types.INTEGER),
xx = new ColumnInfo(java.sql.Types.INTEGER);
//at this point session allready has been published
final ViewObject vo = sessionInfo1.getApplicationModule().createViewObjectFromQueryStmt("TestVO",sql);
final RowSetInfo rsi = new RowSetInfo();
vo.remove();
x.setName("X");
xx.setName("XX");
rsi.setAttributeInfo( new ColumnInfo[] {x,xx} );
rsi.setQueryInfo(new QueryViewInfo("TestVO"));
rsi.setName("TestRS");
rsi.setSession(sessionInfo1);
rsi.publishRowSet();
null

How can you create a test plan generator using labview

Similar Messages

Maybe you are looking for