How can you display to multiple monitors using a Mac book pro

I Need to out put my display to a projector and a vison mixer the projector is VGA and the vision mixer is DVI is there a adaptor that I can  use or hardware that will carry out this task for me

Sorry, but your Mac can only support a single monitor. Will need to buy a Mini-DisplayPort to DVI or VGA adapter, you will need to decide what you need best.
The newer (2011 & forward) Macs come with a Thunderbolt port instead, and that supports up to 2 cascaded devices.

Similar Messages

  • How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

    How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
    I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

    Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
    To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
    Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
    Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
    The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
    You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
    Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

  • How can i restore safari web browser on my mac book pro?

    how can i restore safari web browser on my mac book pro?

    Backup your system/data then start up holding down Command + R and select to reinstall your OS X. You have not mentioned which OS X you are using. If you have somehow deleted the Safari App for some reason, you need to reinstall the OS X to reinstall Safari properly. You should not lose any data, but if you do, then that is what the backup is for.
    Pete

  • How can I make a disc cleanup on a Mac Book Pro ?

    how can I make a disc cleanup on a Mac Book Pro ?

    I'm not sure exactly what you're asking, but note that Macs don't need regular "cleaning." See The myth of the dirty Mac.

  • How can I exchange my whole data between my mac book pro and my iMac?

    How can I exchange my whole data between my mac book pro and my iMac?

    i use both, the macbook at work and the imac at home, but ineed to have the same data on both macs, how can i sync them?

  • Please can you help me? I have a Mac Book Pro with OS X 10.7.4 and my FaceTime doesn't open anymore. It appears this sentence:"the server detected an error during the elaboration of the registration. Please try later". What happens??

    Please can you help me? I have a Mac Book Pro with OS X 10.7.4 and my FaceTime doesn't open anymore. It appears this sentence:"the server detected an error during the elaboration of the registration. Please try later". What happens??

    Start the computer from the installation disk and perform Repair Disk and Repair Permissions using Disk Utility

  • How can I print from my iPad through my Mac Book Pro which is connected to a printer?  I was told I could do this.

    How can I print from my iPad through my Mac Book Pro which is connected to a printer?  I was told I could do this when the iPad and Mac Book Pro are synched together.

    Antique lady wrote:
    So If I download Printopia on my Mac Book Pro, do I go to iTunes to somehow connect the computer and the iPad? 
    No.
    Printopia (running on your Mac) connects the iPad to your printer.

  • How can i run a windows based program on mac book pro

    Can I run a windows based program on mac book pro mountain lion 10.8.4

    You can use bootcamp to install windows natively on the hard drive.  You then choose which OS you wish to use at startup - OS X or Windows.
    You can also install Windows in a virtual machine - Parallels or VMWare Fusion - and run it simultaneously with OS X (a virtual machine is just a PC emulated in software, and you install and run windows in the emulated machine hardware).

  • How do i run 2 external monitors on my mac book pro?

    so im trying to run 2 external monitors off my mac book pro and was wondering how and the best way to do it?

    Matrox.com has a device for that.

  • Can a USB drive be formatted using a Mac book pro

    Can a USB drive be formatted using a Mac book pro

    Yes, use Disk Utility in your Utilities folder.

  • How can I increase hard drive space on my mac book pro

    I have only about 30 gb left on my hard drive. I have a mac book pro I bought in 2013. I've deleted or transferred to an external hard drive
    as much material as possible. How can I find out what is taking up all the room?? My dropbox always says it can't sync because I don't have
    enough room on my hard drive. Why isn't 30gb enough? Please tell me how I can find out which files are taking up so much room and how I can
    find out what I can get rid of (are there programs I don't know about?) thanks
    Isabella

    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Get an external hard drive on which to store some of your files after which you can
          erase the data from your internal drive to free up space.
      5. Also see Freeing space on your Mac OS X startup disk.
      6. See Where did my Disk Space go?.
      7. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • Where can I find Garageband 11 6.0.4 or any old versions and how can i get it installed on my 2014 Mac Book Pro

    Where can I find Garage 11 v6.0.4 to install on my 2014 mac book pro .

    You cannot download a full installer from Apple's download site, only updates. Apple does no longer sell GarageBand '11, since the current version is Garageband 10.
    Try to find an iLife '11 installer DVD at Amazon. This will install an early GarageBand '11, version 6.0.x, and you can update it from Apple's support site to GarageBand 6.0.5 using this link: GarageBand 6 .0.5

  • Can you connect the TC directly to a Mac Book Pro thru either USB or Ethernet?

    Can you hook a Time Capsule directly to a Mac Book Pro thru USB Port or Ethernet or?
    So that you can speed up the transfer time??
    It's so slow compared to directly connected FW800 and Thunderbolt Drives...
    It's painful...
    Thanks

    Ethernet, yes. Connect the Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule. This should be 4-5 times faster than wireless. Be sure to turn off wireless on the Mac.
    USB,no.

  • How can I buy black rubber feet for my mac book pro mid 2009

    MY 2009 Mid Mac Book Pro bottom pad came off.  Very very poor design.  These should last forever.  I noticed that this was a design or product failure.  Thus I need the part number to order them.  Cant seem to get any assistance.

    I have located the pads on Ebay.  I biggest issue is the design for removal and install.  Yes nothing last forever!! If you look at the message boards they are failing on new product also.  Poor design any way you look at it!!
    pbparts.com 
    http://pbparts.com/shop/076-1399
    Thanks syndelklett for the reply have a great weekend!

  • How do you completely erase recently calls from your Mac Book Pro

    I am trying to erase numbers from my most recent on my iMessage on my Mac Book Pro.  Its memorizing the number and I don't want it to.

    Oh, that means you've had a kernel panic. Just restart the computer. You don't have to disconnect the other computer if it's on an Ethernet connection.

Maybe you are looking for

  • Subcontracting PO from Sales order = Delivery address tab = customer

    Hi, We have a Sales order which saves a PR. If I transfer the PR to the subcontracting PO. The delivery address is equal to my company. But I want to send the goods directly to the end customer. I will post a dummy receipt. I need a customer field in

  • Error in system created to connect BI from portal

    I'm  getting error when i connect with our back end system BI. i created a system using template SAP system with load balancing. i created alias for this system and did user mapping. when i run connetcion test i got the following as test result Test

  • Movie doesnt start at the right place.

    Using idvd 7.0.3 I created a DVD project. Ive made many w/o a problem. Each has two movies. Each movie on the second screen shows 2 menus "play movie" and "scene selections" (the chapters). Problem: When I click "Play movie" the movie instead of star

  • JSP with XML SOAP

    Hi, Anyone know where to get the example to create the xml soap by using jsp? i tried to search it in web but no relevent links found. Can anyone give me some example if you know about it? Thanks

  • How Do Property Wrappers Work?

    Bellow is an example of a simple string property wrapper. In the program bellow I expected any changes that I made to a property object to be pushed back to the field in the Pojo that it wraps. Based on the outpup it doesn't seems like changes are pu