How can you do this effect in Premiere?

Hi
The cycling team Saxo Tinkoff have produced some very cool videoes. A lot of the effects, I can figure out how to do, but one is puzzling me. 
The effect can be seen in the video about Roman Kreuziger here at 6 seconds and 55 seconds:
http://www.saxobank.com/cycling/
The effects pushes and shakes the picture a bit to one side and the empty bit of the frame is fillede with a red blue tone, to similate and old school burn out from the days with 9mm.
Hope you guys can help

Video Copilot Twitch
https://www.videocopilot.net/products/twitch/
A plugin that works in After Effects.
Twitch is used in varying ways throughout that video.

Similar Messages

  • Cool effect..how can i create this effect on Motion 3?

    that's great.
    Someone please tell me how can i create this effect on motion 3?
    http://www.ayatoweb.com/aetips_e/ae17_mov05e.html
    thanks

    Use the bezier tool to create your shapes, give the shapes an Airbrush outline. Then apply a Write On behavior to each shape. Position the shapes in the timeline so they appear sequentially. To achieve the zooming out effect, you can either scale the whole group, or convert the group to 3D and use the camera to zoom out.

  • WHAT iS THIS EFFECT CALLED? OR HOW CAN I GET THIS EFFECT?

    WHAT'S THIS EFFECT CALLED? OR HOW CAN I GET THIS EFFECT?
    first of  all i don't know what's this kind of photo effect called, i just describe it as bright, clean and w/o lack of contrasts
    secondly, i wanna learn how to achieve this effect.....really don't know how
    need help here....
    btw i don't know where to post this post....so i just start from here  =)\

    For my part you are welcome, Lisa.
    then what about the color tone here? it's very pure and clean, a touch of blue i think, is it from the nature light or from photoshop effect?
    The colour tone is (hopefully) a result of the nature of the natural light faithfully reproduced by the high quality of the camera (and film if relevant).
    You will get quite different and sometimes rapidly changing tones of colour depending on the natural light; this is different for different times of day, different directions, different weather conditions.
    Just to mention a few comparisons, the warm light from the setting sun is quite different from the cool light from the clear bright sky through a (high) window to the north at noon, and the light of the sun can be changed immensely by the huge white (or grey) filter sometimes applied to (parts of) the sky.
    You may do many things in Photoshop, but photography is still an art form, not just cheating, at least for some.
    I believe one of the real provings of cameras/films is the ability to reproduce the delicate but profoundly different tinges in snow on a clear day.

  • I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s but does not connect , it shows that it wants to connect , how can you connect this?

    I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?

    http://support.apple.com/kb/ts1538

  • How can you search this forum without searching all the other forums

    how can you search this forum without searching all the other forums at the same time which is a big fat waste of time.

    Follow this tip to create a bookmark to a search page that searches only the forum you want or...
    Browse with Firefox and enable this Greasemonkey script, which forces all searches from a sub-forum to be local.

  • I am using Toast 11 to burn dvd's. With FCP10.1.3  I could go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn.  How can you do this with FCP 10.1.4?

    I am using Toast 11 to burn dvd's. With FCP10.1.3  I used to go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn.  How can you do this with FCP 10.1.4? 

    BenB it creates a disc image only and it's not in .m2v. I think it saved it as an Apple Pro Res 422 format instead. The disc image file format will not allow
    Toast 11 to create menus etc.  Thanks for your help.

  • HT1589 how can you do this for windows 8?

    how can you do this for windows 8?

    It should be the same as in other versions of Windows; hold down the Shift key and launch iTunes. Have you tried that and found it not to work?

  • How can i make this effect in After Effects?

    hello guys, im new to this awesome program, im using the trial version so ive limited time to learn XD
    can you tell me ho can i replicate this effect in after effect?
    http://tinypic.com/player.php?v=2ajnybc&s=6
    looks like speed effect... is there a way to replicate it in after effects?
    thank you

    CC Bender is really easy to use. Just take the default settings and animate the amount with about three keyframes.
    We can make it a lot more complicated with something like liquefy, or even Time Displacement.

  • HT1535 How can you do this on the new iTunes 11?

    How can you sync your iphone manually on the new iTunes 11?

    To analafond: (and everyone else)
    I don't have an answer for you but I'm going thru the same thing. I just want to select MANUALLY MANAGE MY MUSIC AND VIDEOS on iTunes so that I can ADD -- not remove or replace -- what I already have on my iPhone.
    I couldn't find an answer so I just went ahead and "replaced" music and added movies to my iPhone. I thought I had the "manually" box selected. It wiped out ALL my ringtones and everything else important to me. Thank you God for iCloud.
    BUT with iCloud, in order to actually use this fabulous feature, you have to "restore to factory settings" So you have to strip it down and start over. Grrrr.
    So I wanted my ringtones back and I got everything I had BACK (minus a few text messages and photos I didn't back up) but I'm still having the same issue.
    THE MANUALLY MANGAGE MUSIC SELECTION BOX DOES NOT WORK!! I don't want to have to load my iPhone with what I want -- back it up -- strip it down -- bring it all back -- just to get what I want on my device. But then iCloud does NOT back up your music unless you "purchased" it. Seriously? That's unfair and stupid. I have 80 GB of music on my computer. I want to put what I want on my iPhone.
    Anyone? Anyone? APPLE? This is the worst update ever.

  • I have no audio what so ever i have seen in one of the tables where it was deleted how can you fix this i tried everything i know

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    i have been trying to get the audio to play for 3 days now i did see where it had been deleted this is a used comp i haven't had it long can you fix this i'm at my wits end
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows NT 5.0
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
    == Plugins installed
    ==
    *-Default Plug-in
    *Adobe Acrobat Plug-In Version 5.10 for Netscape
    *Java(TM) Platform SE binary
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    *Network Object Plugin
    *Windows Multimedia Services DRM Store Plug-In
    *Npdsplay dll

    Hello Virginia.
    You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?

  • HT201365 how can you disable this feature?Don't want to have to use passcode everytime i need to use the devise.

    How can you disable the password feature? Don't want to have to use code every time I need to use the phone.

    goto settings->general->passcode lock->turn passcode off

  • How can I get this effect?

    Hello! Good day to all.
    I was wondering if any of you experienced photoshop users can help me to learn how to get this effect.
    Here is the "before edition" image:
    And here is the "after edition" image:
    I got this effect playing around with filters in my Adobe Elements, but now that my father bought Photoshop CS6 Extended, I took advantage and installed it on my laptop aswell. The problem is, I have no idea how to use most of it.
    I've been learning some tricks on YouTube tutorials and courses, but I just can't find the way to get this one effect.
    I'm very gratefull for you taking the time to reading this and helping me, and I wish you a great day.

    Lots of ways to do that. After applying the Threshold adjustment, you could use Gaussian blur followed by levels and drag the black and white sliders toward the center like this:
    Or
    You could use the Magic wand with Contiguous un-checked, and select the blacks.  Then use Refine Edge, and add some Smoothing, and wee bit of feather.  OK that and fill with black  (Alt/Opt backspace with black as your foreground colour)
    Now invert the selection (Ctrl Shift i or Cmd Shift i) and fill with white.  You will loose fine detail acording to the settings you use in Refine edge - especiall the amount of Smoothing.
    Or
    Copy the layer with Ctrl/Cmd j
    Add a new background layer, and fill with white.
    Select the blacks with the magic wand (remember to uncheck contiguous in the Options bar), and with the selection in place, add a layer mask.
    Now completely fill the layer (not the layer mask) with black.
    You can now adjust the effect with the Mask Properties panel.  If you can get it right with Feather you can make as many adjustments as you like to fine tune, but if you use Mask edge, you only get one go because it is destructive editing.  

  • How can I make this effect to introduce somebody in my video?

    Hi,
    I like to know how I can make this effect to introduce somebody: www.hofleverancier.be
    You can see the effect on the 7nd second.
    Can anybody help me out?
    Thanks!
    Glenn.

    There are many ways.
    One of them would be:
    export the specific point were it starts to Quicktime Conversion > Still Image >OPPTIONS: Photoshop.
    Open this still in Photoshop. Cutout the man by using the magic lasso tool.
    So then 2 layers. Background and Foregrond (The man).
    Import this 2 layered PSD in FCP. Cut it right after the point you exported. On V1 the Background, On V2 the Man. Bring the background to Black and white. Set Keyframes for the SCALE on V2, in order to 'zoom in' on the person a little bit.
    And ad a title effect.
    Well, this is the short version. Try to play with it yourself. You can also do all the compositing in Motion, or After Effects.
    Rienk

  • How would you create this effect?

    I am curious if there is a fairly straight-foward away of creating the effect seen in this image. I am talking about the pixelated effect made up of many little red boxes of various hues at the top part of the image.
    I was thinking of zooming in real close to an image in photoshop and doing a screen capture, but I'd rather have a vector image that can be easily scaled in size and easy to change the hue to different colors.
    Something like this able to be done in illustrator without building it a box at a time?
    Regards,

    Well I'd say that PDF is a vector.
    The PDF contains nothing other than a raster image. It contains no vector paths.
    (By the way: "A vector" is a single expression of a direction. Calling a vector-based illustration "a vector" is like calling a raster-based image "a pixel.")
    I zoomed in as close as I could and didn't see any pixels.
    All you could see is pixels. That's all that's there.
    If it's raster I'd be interested in knowing what resolution...
    Its resolution is 1. It's a single-pixel raster image (as given away in its title).
    I've never experienced a raster image that didn't get more pixelated the larger you scaled it up.
    Yes, you have. That's exactly what I demonstrated in post 5 and in the PDF.
    The operative word in your comment is more pixelated. That misconception is the point of the demonstration. Your image is already pixelated, and that's exactly what you want. It won't be "more" pixelated whatsoever, no matter how large you scale it.
    At the heart of the [quite common] misconception is this: What you are calling "resolution" is not. True resolution is the measure of the amount of information contained. A raster image contains only a fixed amount of information. PPI is merely a scale factor. It's merely an expression of information density, not quantity. As you can see, that PDF is every bit as "resolution independent" (i.e.; scaleable) as a vector square.
    The same priciple applies to your raster image. Your whole intent in your posted example is to display pixelation. So if the very thing you're trying to depict is the pixelation of, say, a 10 pixel x 20 pixel raster image, then all you need in order to depict that at any scale is a 10 pixel by 20 pixel raster image. At a scale of 10 PPI, you've got a perfect depiction of 10 square Pixels Per Inch. At a scale of 200%, you've got a perfect depiction of 5 square Pixels Per Inch (i.e.; 10 Pixels Per 2 Inches). You can scale it to the size of the moon and you'll have a perfect depiction of 10 Pixels Per Moon. It's just as scaleable as a 10 x 20 array of vector squares.
    In other words: All the actual resolution of your raster image (all its information—all its pixels, in all their squareness) is already visible. Reducing its information density (by scaling it larger) will not reveal more of its actual information (the square shape of its pixels—the information that one usually wants to conceal or disguize about raster images, but not in this case).
    The whole purpose of making sure your raster images have "sufficient resolution" in desktop publishing is to disguise the squareness of their pixels (what is commonly called "pixelation"). But that is exactly what you are intending to depict in this case. And you want to be able to depict that with equal clarity at any scale. There's no need to re-draw it as vector paths in order to do that. In this situation, you are not trying to avoid "pixelation," you are trying to show it, which is exactly what a raster image does by its nature.
    Think of it this way: If all you are trying to draw is 200 squares, it can easily be argued that a raster image is more "data efficient" than a file containing 200 square vector paths. For each vector path, you have to include four coordinate pairs (800 anchor points). For a raster image, all you need is 200 color values.
    This is not just a symantic or academic or pompous know-it-all point of argument. It's a point widely applicable to many common situations, and something every graphics professional should understand. For example, consider the software instructions author who pointlessly frets over the misunderstood "requirement" for pixel density when his illustrations necessarily consist of screenshots that are, after all, supposed to accurately and clearly depict what the user sees on his screen. Or the fact that you see single-pixel raster images scaled to the full width of the page, or dimensions of a table cell or large section of a whole background on web pages everyday. Or the widespread misconception that intentionally fuzzy raster effects like soft drop shapows "require" 300 PPI.
    JET

  • How Would You Do This Effect in Logic?

    I'm trying to figure out how I would best achieve the vocal effect in Kesha's song "BLOW."
    http://www.youtube.com/watch?v=_USZ2D0GTxo
    In the chorus, there is the catchy "blow....oh...oh..oh..oh..oh..oh" section. Someone suggested she sings the entire line, which gets interrupted by a gate, which could be triggered by a keyboard, so everytime you hit a note, it stops the steady note she's singing. If you guys think that's what they are doing, how would I set this up? This kind of thing goes on in modern pop all the time and I have to find a way to do this effect before it drives me crazy;)
    I get hired to do karaoke tracks all the time and whenever there is one these to day it is always a pain due to my being more a traditional guitar, keyboard "organic" producer than synth/FX guy.
    Thanks for any help.
    Tom

    Thanks David.
    The plug ins you mention don't really help though, because they can only be set to preset patterns. This is a specific pattern of course. I know The Bee Gees did this in Robin Gibb song from the 80s called "Boys Do Fall In Love" ....there was a section that went "B......B...B...Boys fall in love." They did it by sampling the phrase into the Emulator back then and playing the phrase. I guess I could do that with EXS.
    The best solution would be if there was a way to make a gate respond to a midi track, so I could play the rhythm on the midi track, quantize it, then use that as a trigger to the gate...gonna try that...Guess I could also record the midi track as a sidestick or something and use that audio track to trigger the gate....hmmmm.
    Tom

Maybe you are looking for