How can you enable the internet connection to use iTunes?

I cannot access iTunes Store. How can I resolve it?

Hello ElJohnC
If you are having issues with accessing the iTunes store, the article below will give some troubleshooting steps to resolve the issue.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Similar Messages

How can I stop the screen skipping whilst using itunes!?

Okay, after some spending some time using it, I am finally starting to get the hang of using itunes.
However, when I am listening to a song, and then scroll up or down to edit another song, when the song that I am listening finishes, and plays the song next to it, the screen skips down to that song in the list so I loose my place. This is somewhat irritating. Is there any way that I can stop this from happening?
Thanks.

Anybody?

How can you keep the wifi connected after logoff

I have a brand new MBP with 10.8.4. I would like to login to my AD account but because the wireless is disconnected, I get the red light and the "Network accounts are unavailable". The machine binded to AD just fine....
Thanks for any help.

I have no idea how to keep it connected, but you should have no problems logging back in to the network. The upside to haveing the WIFI shut down when you are logged out is that nobody can remotely connect to your system over WIFI. A wired ethernet connection remains active.
The red light is more informative that indicating you have a problem. I have the same symptoms with my work network and have no problems. The network accounts problem is for those that are setup to have no local login and require a network connection for authentication. Is this what you have?

How can you keep the file name when using "Download Linked File As..."?

I'm a longtime PC user finally making the transition to Mac. Some of the tasks that seemed so simple in Windows have really stumped me! One of the tasks I do frequently is download files into specific folders. After much looking, I finally found the "Download Linked File As..." option if I right-click on the download link. The problem is, when I choose this option, I lose the file name. I get a window in which I can choose the desired folder, but the filename is always "0". If I want to keep the filename (and I usually do), I have to type it in manually. Is there anyway around this?

You can post a screen shot by clicking on the liitle Camera icon above your reply. :)
Just checked on 10.7.4+, still the same, something is borked about your install, to see if we need to re-install...
To find out if it's system wide or user specific, try this...
Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account?

Can you access the internet using wifi only on an iPhone 4?

How can you access the internet using WiFi only (no service) on an iPhone 4?

Assuming your connected to wifi - go to safari.

How can you access the printer settings in CS5 when using Epson 4900?

How can you access the printer settings when using Epson 4900 with CS5 12.1 x 64

Open the print dialog box, click "print settings".

I have a Verizon IPhone 4 and i can't figure out how to get my ringtones from an app to my iTunes account, it doesn't have a tab for Ringtones! I have tried unplugging it and checking if would show up but it didn't, how do you enable the ringtone folder?

I have a verizon IPhone and i can't figure out how to get my ringtones from the app to iTunes, my account doesn't have a ringtone section in the liRingtone Folder?brary, how do you enable the ringtone folder?

Edit > Preferences. Select the check box for Ringtones, this will add them to the listing in iTunes.
Not sure that really answers your question though.

How can you enable back the Android native Menu button in AIR 2.7?

I've noticed in AIR 2.7 for Android, that now the bottom icons in Android 3.0 Honeycomb are hidden (replaced by small dots) in AIR 2.7, whereas in AIR 2.6 they were always visible. That's cool. Since the bottom bar can never be hidden in Android 3, at least now those icons are less visible (unless you intentionally touch the bottom bar, then the icons show up for a few seconds).
BUT I also noticed in AIR 2.7 compiled apps, the native "Menu" icon is not visible anymore, even after touching the bottom bar. In AIR 2.6 you could see and press that button (which can be captured from AIR so you can show a custom settings menu or whatever).
So, quoting the subject --> How can you enable back the Android native Menu button in AIR 2.7?

There is a work around and a reason for the menu issue. Honeycomb doesn't natively support a menu softkey, it is only to support old apps comiled in phone API levels. If you compile a Honeycomb app in 2.7 or 3.0, it is expected you manage the settings within the larger tablet UI framework. See below link for more info and work around.
http://forums.adobe.com/message/3964792#3964792

I have just bought a ibook g4 how do you get the internet

how d you get the internet working from the airport , i have an airport extreme and the spec says airport how do i connect to the internet

You can connect to the Internet via the Ethernet port or wirelessly. To connect either way you need to have internet service from an Internet Service Provider, or via Wi-Fi. To connect wirelessly at home you need a wireless router like an Airport Extreme base station.
Please do post back with further questions or comments if any.
HAPPY HOLIDAYS!
cornelius

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

How can I share the internet without any network distribution?

I am facing a problem of internet sharing.
I would like to share my connection from ethernet to airport,
however, when I chose the "internet sharing" box, safari failed to connect to the internet.
After removing the tick of the box, web browsing became normal again.
how can I share the internet without any network distribution?
thanks!

You'd have to select in Sharing Preferences > Internet Sharing > Share your connection from ETHERNET, and to computers using AIRPORT.

How can I read the internet speed in a MAC?

How can I find the INTERNET SPEED in a MAC?

You typically use a free Internet Speed test. It does an upload and a download from a known site, bypassing certain configuration problems. Just do a search to find a dozen services eager to test with you (in exchange for the Ads on their pages).
Do not pay for this service, and DO NOT accept any CR@P they suggest you download to "fix" your speed. They cannot tell from outside whether you have problems, and none of the things you can download ever makes anything better.
If using Wi-Fi, one generally finds that the Wi-Fi part of the connection is the limiting factor.

How to switch off the internet connection via GPRS by iphone 3G

how to switch off the internet connection via GPRS by iphone 3G?
need help.
thanks

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

How can you enable the internet connection to use iTunes?

Similar Messages

Maybe you are looking for