How can you evaluate a graphed point in numbers

After you make a graph and incorporate a trendline. How can you evaluate that trend line at a specific x/y value point, even if it is not a graphed point in your table?

If you know the constants from the trendline then you can use them to extrapolate. To get the constants check the "Show Equation" box in the Chart Inspector > Series > Trendline
On the graph you will see the equation for the trendline:
In this case the equation is "y=2.6x + 2"
I added a new column to the data table and named is "Y extrapolated".
Then I highlighted the graph
Then click on the "sprocket " for the X values in the data table and select the "Share X Values"
Then click and hold the little circle at the bottom right corner of the selection in the table (to add the new column to the graph), then drag to the right one colum (my column is green).
Then in the new column add the formula as shown:
C7=2.6*A7+2
select C7 and fill down as need (by clicking and holding on the little circle at the bottom right of the selected cell).
I hope this helps

Similar Messages

How can you set a ringtone for unknown numbers

How can you set a ringtone for unknown numbers?

You can set up each one of your contacts with a ringtone and use the default for all other unknown numbers. There is no way to set up a ringtone for unknown numbers.

Premiere CS3: How can you encode xml cue point data in the chapter section of a marker for FlashVid?

Hi there,
I'm a total newb to this forum, so hello adobe premiere community! I'm perplexed by Adobes documentation on Premiere (and I'm sure I'm not the first ) anyway on the live documents page below:
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS9390BED7-9466-46ea-A0E A-3240F1AFC36C.html
it states that:
“The cue point data in the Chapter field of a sequence marker in Adobe Premiere Pro will be encoded as Flash XML. For the XML protocol required, see Flash Help.”
Which is great…except this information doesn’t exist seemingly in either the Premiere documentation or Flash either for that matter, but as I’m interested in working with the chapter/marker area in Premiere – should I really be told to go off and search the documentation for another application, probably not! What would have been useful would have been a code snippet saying you do it like this, but of course, that would make things too easy!
Basically, I understand that in After FX you can add Flash marker information specifically for interpretation when exporting to Flash Video (i.e. name, type and parameters etc) and it suggests that you can do the same above in Premiere CS3 using some kind of concatenated string in the chapter area…it just doesn’t tell you how anywhere seemingly – WHY ADOBE!
Currently when I export markers as cue points based on the advice in the page above, anything I put in the chapter section to force Premiere to create a cue point is converted to a string, which becomes the cue point ‘name’.
This cue point name is then automatically appended to the ‘time’ the marker was inserted at and is always encoded as type ‘navigation’, with no obvious means of adding ‘parameters’ into the equation.
So (finally) does anyone know if you can insert this information into the chapter area for correct interpretation by flash (i.e. thus allowing you to choose between either 'navigation' or 'event' types, and pass as many 'parameters' as you wish etc) or are you just limited to supplying a name, and it being automatically set to the navigation type with no parameters?
I’m sorry for this long essay but at least the issue is well defined for you to answer, honestly any help you can provide what so ever would really be most appreciated!
Best regards,
Kat
PS – I have utterly no knowledge of XML either just in case you were wondering – and my only interest in XML is getting this basic information encoded into the FLV file from Premiere Pro CS3! Please help, pretty please with daisy’s!!!

Hi dradeke,
Thanks for your reply, which is indeed useful as clearly Adobe have made this task easier and less obscure in CS4 by adding simple interface functionality, however I'm stuck with using CS3 for the moment. Its not majorly a problem as the video material in question can be exported uncompressed then setup with cue points using the Flash encoder as an alternative (i.e. or even After FX CS3 also) which both provide the same features as Premiere CS4 seemingly. It is just that it would be much easier to be able to drop in simple markers whilst working with Premiere CS3, as this is what we are going to be using primarily, I just wondered if anyone knew how to invoke this in CS3 - its possible you can't, the documentation is vague at best!
However I really appreciate your response and help, thanks

How can I get my graph to plot vs. my data points instead of vs. time?

how can I get my graph to plot vs. my data points instead of vs. time?

Maybe you could exaplin in a few more words what "my data" is. Are the values equally or randomly spaced?
If they are equally spaced, just adjust offset and multiplier, and axis label.
If they are randomly spaced you are probably looking for an X-Y graph. Check the shipping examples.
LabVIEW Champion . Do more with less code and in less time .

Can you get a power point program for the mac, my daughter has a power point assignment and i am not sure how to do it on the mac

Can you get a power point program for the mac, my daughter has a power point assignment and i am not sure how to do it on the mac

You can use a free alternative like openoffice for this:
http://www.openoffice.org/porting/mac/
or libre office which is a fork of open office:
http://www.libreoffice.org/

How can you tell if a file is being used in your project or not?

How can you tell if a file in your bin is being used in your project or not? My director dragged hundreds of reference files into my project and only used a few of them. I'd like to do some house cleaning and delete the ones that are not in use. This project file has 100 sequences in it, so it would be a tough manual hunt to figure this out.
In Premiere Pro (or Flash for example), where all the information is in the Project Bin such as in/out times and duration, there is where it tells you how many times that piece of media has been used or if it hasn't been used yet.
Can FCP tell me this info?
Thanks for yout time!
-Monty

Monty,
Within FCP, there is a menu item called "Media Manager" (depending on what version you are in). This would be worth your while to look into. It basically organizes your project by moving/archiving any used assets of a project and leaving out un-used assets. It saves a ton of disk space.
For example, say you have a 5 minute clip with an in/out point that is just 30 seconds. Media Manager will "archive" just that 30 seconds, not the entire clip. There is even a setting that you can add additional "handles" time to the front andd back of the clip if you think you may need to add or change transition.
Do a google search. I was just watching a few Youtube videos on this myself.
Jonathan

How can you save a draft SMS on X3-02 ?

How can you save a draft SMS on X3-02 ?
Can't seem to find an option to do this ... Lost message typed half way when I got out of the editor to check the calendar.
Am I missing something or has Nokians obsoleted this function on the latest S40 platform ?
Solved!
Go to Solution.

Hi all,
Like sudude here pointed out that's one way of leaving text as "draft" to message editor. Or you can also select Options > More > Exit editor to do the same. And, next time when you select Create message that previous text should be there as it was left.
But there is also another option to start writing SMS's - with Notes application. Select Menu > Apps > Notes. Write a note and save it. Then for that note select Options > Send note > Send as message. Now your note is copied to message editor and you can send it or further edit and then send. Neat thing here is that when you use Notes application, text can be saved for later editing or use.
-ThreeOs

How Can You Change the Look and Feel of Charts in OBIEE 11g

How Can You Change the Look and Feel of Charts in OBIEE 11g?
Edited by: user11973122 on Jul 18, 2012 12:13 AM

Check these files
OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\s_blafp\viewui\chart\dvt-graph-skin.xml
OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\views\dvtchart\obips.dvtchart.xml
OFM_HOME\Oracle_BI1\bifoundation\web\display\chartfontmapping.xml
Pls mark correct or helpful if helps

How can you make an image adjustment on all images in a Stack

If one had a stack of images that need a brightness adjustment. How can you preform the adjustment a stack of images that need the same amount of adjustment?
Many times I have a stack of images that need a +10 brightness adjustment on them and it would save a lot of time if I could do it on a whole stack of images.

good points, as l/s takes every adjustment ... including autolevels/exposure ... BUT DOESN'T make them auto to the next image(s), it just lifts the current image settings !!! which is fine for a five shoot series all at the same exposure, but not so much when it is not !!!

How can I cache dvt graph results?

Hello colleagues, I need some help regarding dvt graphs performance.
In our application we have big amount of data which the user can filter by adding grouping options, time ranges, etc. For the graph to be updated (the query to be re-executed), the user has to press a "Refresh" button each time he changes the query parameters.
Once the new results are displayed in the graph, the user can change the graph type by pressing either a pie, bar, line or table buttons. As a consequence of this, the query is re-executed and returns the same previous results. This obviously drops the performance of the application.
So, how we can manage to refresh the type of graph (for example from pie to bar) without re-executing the query. Note that the "Refresh" button should always re-execute the query even if the parameters were not changed.
I'll appreciate your help.
Regards,
Nicolas
Edited by: 864814 on Oct 14, 2011 6:05 AM

And by the way how are you switching the graph type? Are you using an af:graph tag and switching just the type? Or are you rendering a complete new graph on your page?

How do you determine transportation planning point

Hi Gurus,
Badly need your help. How do you determine transportation planning point?
Thanks,
Paul

Dear John
It is based on routes and route schedules are determined based on the following conditions:-
=> Shipping point
     Where are the goods coming from?
=> Ship-to party and unloading point
     Where are the goods going to?
=> Shipping condition
     How are the goods being shipped?
=> Transportation group
     Which goods are shipped?
     --> For example, which type of goods?
=> Calendar week / year
      When are the goods to be shipped?
If you do not explicitly enter the week and the year, the entry applies for each calendar week. If you enter a week and a year, the route schedule only applies for this week.
You can only use route schedules if you have maintained the working times and therefore at least one of the following times in minutes:
       -> Transportation planning time
       -> Pick/pack time
       -> Loading time
       -> Transit time
A route schedule can leave the warehouse exactly once in a week. If a route schedule runs several times, either on several days or several times a day, it must be copied to another route schedule.
Thanks
G. Lakshmipathi

How can you found out what computers you are home sharing so you can delete some, How can you found out what computers you are home sharing so you can delete some

How can you find out what computers you are sharing with so you can delete some

Oh, have you brought up so many good points. Not to take us off-topic, but I could rant all day about Eloqua consulting firms who let low-level employees (Eloqua skill-wise) loose on clients projects. Just not fair for either the employee or client. There was one company that did this to me a few years ago, and since then dozens of people have asked me about them for a reference. Needless to say, they never get a good one from me, and have likely lost hundreds of thousands of dollars in projects because of this. Not worth it in the long-run to cut corners.
Back to the topic at hand....
You really hit the nail on the head in so many ways. It really all does come down to one thing: hard work. There are no shortcuts. Always keep learning. Embrace every Eloqua challenge you can, and never say never. Never be fearful of being wrong by asking something 'silly', or 'looking stupid'. I remember several times that I've submitted Eloqua support tickets, or tickets to other related vendors about things that I was convinced were bugs/major issues. Turned out to be my mistake. But that's ok. You brush off, stand back up, and learn from them.
And finally, be modest. You will never know everything about Eloqua. Be willing to learn from others, and know that there actually may be a better way to do something than you may have spent days or weeks working on.

Cs6 , how can i add a anchor point in the curve in the channel Red or Green?

Hi
how can i add an anchor point in the curve in the Channel R / G and B?
in cs5 , with ctrl + click i was able to click on the image and add an anchor point in the curve channel RGB
and with shift +ctrl + click i was able to click on the image and add an anchor poing in the channel Red , 1 in the channel Green and 1 in the channel blue
i know cs6 doesn't have any more ctrl+mouse click , there is the targeted adjustamanent tool
i can do it with ctrl+m and call the curve
but i can't do it with curve adjustament tool
is there a way to add a anchor point in each channel red , green and blue (like the prev photoshop)?
thanks

thanks that's correct! thanks
but it's not 100% correct
to add a multiple points in rgb shift+click doesn't work!
from adobe
Keyboard shortcuts: Curves
You can use these keyboard shortcuts for Curves:
To set a point on the curve for the selected color in each color component channel (but not in the composite channel), Shift+Ctrl-click (Windows) or Shift+Command-click (Mac OS) in the image.
To select multiple points, Shift-click points on the curve. Selected points are filled with black.
To deselect all points on the curve, click in the grid, or press Ctrl‑D (Windows) or Command-D (Mac OS).
To select the next higher point on the curve, press the plus key; to select the next lowest, press the minus key.
To move selected points on the curve, press the arrow keys.
(Curves dialog box) To set a point on the curve for the current channel, Ctrl-click (Windows) or Command-click (Mac OS) in the image.
If you’re instead using the Curves adjustment, simply click in the image with the On-image adjustment tool .

How can you edit a form that you've already created?

I'm not referring to the form fields. I mean if you have a typo for example in the docuyment you created from InDesign and now you need to go back and correct it. How can you do that and maintain all the fields you've already created?
If you're not able to do this, that would be a huge flaw in the workflow.

metonda wrote:
Oh my gosh. That is so simple. I'm embarrassed that I even asked the question.
Thanks very much!!
No need to be embarrassed. That gets a lot of people. Most assume (and I did too at one point) that replace pages does that, replaces the page and everything on it.

How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it??? At the moment, if I view them on my laptop, landscape photos fill the screen, but portrait photos only show the middle part.

How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it (in Slideshow)??? At the moment, if I view them on my Mac Laptop, landscape photos fill the screen, but portrait photos only show the middle part, so I loose the top and bottom of the picture. Have tried cropping, but that means I lose top and bottom part of the picture, so that is not the answer!!

Homestly haven't a clue what's going on there.
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

How can you evaluate a graphed point in numbers

Similar Messages

Maybe you are looking for