How can you get a imac to boot from install disc(external drive)

It tries for a while then says you have inserted a disc mas osx does not recognize.

sirmark1:
Thanks for the clarification. It helps to get a better grasp of the situation.
If you have not already done so, try this:
• With computer shut off insert disk in external optical drive.
• Start up computer and immediately after chime hold down Option key.
• If CD shows up select it and click the straight arrow.
However, the version of Mail you get from Jaguar will be the earliest version of Mail, whereas the version of Mail in Panther is 1.3.1. You can download 10.3.9 Combo Update and either install the update, or try to extract Mail from the Combo update using Pacifist
Hope one of those work for you.
cornelius

Similar Messages

How can i get itunes to find my music on my external drive?

How can I get Itunes to find my music on my external drive?

has been resolved. Got thye .xml files transferred over

How can i get my Powerpc to boot from a PCIe drive

Hi, I just upgraded my PowerMac G5 Quad 2.5 with 16GB of ram & two 1.8 tyrabite drives. My problem is, I also installed a Velocity solo x2 PCIe card
for a solid state drive. the system recogizes the drive but I'm having a problem with getting my system to boot from that PCIe card drive. Please if anyone
can help me I greatly appreciate it.

If you cannot get the ssd to boot, you can move folders to the ssd.
Unix command ln -- The Unix make link command. I have a copy of virtual PC. It insists on using a folder in my documents folder for saving all of the virtual machine information. This folder is rather large. I used the terminal command ln to move the folder to my external hard drive. Virtual PC had no problem with this move. I do not think that Mac applications notice the ln redirects.
You can use the Unix command ln to redirect a reference to folder on your small partition to a folder on your larger partition. You need to be careful when you pick the folder. You best avoid any system folder, those folders needed at startup. You could pick some user data folder.   Home folders, that is folders in /Users, are a good choice. Please try this when you have a full backup.
mac harddrive > Applications > Utilities > Terminal
man ln
ln -s target source
example:
let's make like my Christmas card folder is on my desktop and make like the names is cards.
mac $ ls /Volumes
GREEN/          Macintosh-HD@
mac $ ls /Volumes/GREEN/Christmas\ Cards/
10 - NeoOffice Writer.pdf*      christmasLabels.odt*
AddressList.ods*                env - NeoOffice Writer.pdf*
ChristmasAddressList.xls*       env.odt*
ChristmasAddressList0.odb*      getLabels.odt*
al.odb*
mac $ cd ~/Desktop/
mac $ pwd
/Users/mac/Desktop
mac $ ln -s /Volumes/GREEN/Christmas\ Cards/ cards
mac $ cd cards/
mac $ pwd
/Users/mac/Desktop/cards
mac $ ls
10 - NeoOffice Writer.pdf*      christmasLabels.odt*
AddressList.ods*                env - NeoOffice Writer.pdf*
ChristmasAddressList.xls*       env.odt*
ChristmasAddressList0.odb*      getLabels.odt*
al.odb*
mac $
An alternative way would be to install SymbolicLinker. SymbolicLinker is a tiny contextual menu plugin that, once installed, allows any user to create symbolic links to files inside the Finder.
http://www.macupdate.com/info.php/id/10433/
How to redirect your iPhoto and ITunes files to an external harddrive:
http://discussions.apple.com/thread.jspa?messageID=6058202#6058202
Robert

How can I get network connection when booting from usb stick or dvd

Computer: HP Pavillion P6-2450eo
Secure Boot disabled
Legacy Boot enabled
Thruogh F9 I can boot in uefi mode from DVD and USB stick but I can't get at network connection from the loadet program. I have tried with Ubuntu 13.04, Linux Mint 15 and Boot Repair - all with same result.
How can I get the programs to boot with network connection?
On beforehand thanks!
poul1304
This question was solved.
View Solution.

Please verify that the programs (Ubuntu, Mint, Boot-Repair, etc.) you are attempting to use, support the Atheros AR8161L gigabit ethernet controller natively. Not all operating systems and software programs support every network device and/or configuration otut of the box. Many times, specific drivers must be loaded or injected into the OS for a device to function properly.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Can't get my Imac to boot from external HD

Hello everybody out there in the community,
while preparing my system to update to Lion, I noticed, that my Imac appears not to boot from an external HD, when selected. When I press option-key and select the clone HD, I nevertheless hear the booting from the internal HD. Tried with firewire and with USB connection to no avail. Both ext. HD's are formatted MAC OS extended (journaled), with a GUID partition.
Any tips, hints or ideas will be appreciated!
Thank you!
(Specs: 3,6 GHz Intel Core i5)

Selected the clone from Preferences > Startup, did a reboot and it still appears that the booting is from the internal HD. I mean it appears like 90% of the booting sound comes from the internal HD, there is only a bit of light flicker (LED) at the beginning and the end of the booting process on the external HD. The clone is named 'clone'.
I did booting from an external HD on my old G5 imac a good few times, it took a while longer and I coud hear and see the booting (LED) from external HD, so I have kind of a 'feeling' how it should be like.
The external HD starts up no problem. It appears on the desktop, I can select it under Preferences > Startup and it shows up during startup using option-key.
Having done the booting, selecting the external HD, I can dismount it and still can open programms and documents, so it ought to be the internal HD ?

Can't get my Imac to boot from CD rom

Sorry for posting the same thread. I made a mistake on the last threads title but I marked the last one as answered. Anyways,I'am trying to use the Mac install CD version of disk utility to repair parts of the disk that can't be repaired by the one on the operating system. I tried holding option key. Whenever I click CD rom, it still boots from the hard drive. I also tried using system preferences to boot boot from CD rom, holding c at startup, and holding cmd option shift delete at startup and it still boots from the hard drive. Why is the computer doing this?

Selected the clone from Preferences > Startup, did a reboot and it still appears that the booting is from the internal HD. I mean it appears like 90% of the booting sound comes from the internal HD, there is only a bit of light flicker (LED) at the beginning and the end of the booting process on the external HD. The clone is named 'clone'.
I did booting from an external HD on my old G5 imac a good few times, it took a while longer and I coud hear and see the booting (LED) from external HD, so I have kind of a 'feeling' how it should be like.
The external HD starts up no problem. It appears on the desktop, I can select it under Preferences > Startup and it shows up during startup using option-key.
Having done the booting, selecting the external HD, I can dismount it and still can open programms and documents, so it ought to be the internal HD ?

How can i get my itunes to recognize itunes on an external drive

My itunes for some reason doesn't recognize my external drive
It has done so for years and NOW it doesn't ... I need help.
Greg

As far as i know, itunes stores the artwork information in the same file as the music itself.
So if you configured iTunes correctly to use the library on your external disc, that should work.

I have a new mac and my old mac had my photos on it how can I get my photos onto iPhoto without using a external drive or flash drive?

My dad put a new mac in and the old Mac had my photos on it, and I checked iPhoto after it the new computer was plugged in and there was no photos in it, and my dad said that they should be in there but they aren't, so is there a way to get my photos onto the new Mac without the old one and without an external or flash drive? Because a lot of my photos I don't have on my camera because the memory card was full and the pictures that I had already had been on the old mac....
Thanks!

Have your dad post de what happened - you need to be at least 13 o se these forums and we need to be able to understand what you are asking
the basic answer to moving photos is Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward. but you say you do not have the old computer
Unless you have a backup or there is more information the answer is there s no way now
LN

How can i get my imac to sync ical from icloud

my iphone and ipad 2 have the correct ical, icloud also has the correct ical, how can i get my imac to sync from them?

Use iCloud to sync the calendar between your MacBookPro and your iPad.
See Settings > iCloud on the iPad and the OS X control panel.
See here: https://www.apple.com/icloud/setup/pc.html

IMac won't boot from install disc

My iMac has been running a little slow the past two days and so I ran Disk Utility. DU reported that I had the incorrect number of thread records and an invalid volume count. It instructed me to repair the disk by booting from the install disc. The problem is that when I try to boot from the install disc (after I choose the disc from the options), I just get a gray screen with the apple logo on it. Nothing else happens, no disc activity, nothing.
Anyone have any ideas as to how to get my iMac to boot from the disc and, ultimately, to get Repair Disc running from DU?
Thanks,
Rich

It should only take a minute or so at most to boot from the DVD.
If your sure you have the correct Install Disk for that iMac, I'd start over. Then if it still doesn't work then perhaps a trip to your Local Apple Service Provider with the Disk or Disk and iMac is in order.
http://www.apple.com/buy/locator/service/
Alternately using the correct Disk as per the following article, see if you can run the Apple Hardware Test? > http://support.apple.com/kb/HT1509

Booting from Install Disc

This seems like such a simple question, but for the life of me I couldn't get it to work. I was helping a friend with her new MacBook Pro and tried doing a CD boot from the Install disc. The computer booted fine, but immediately went into the installer, and I could find no way to exit the installer without shutting down. How can I do a straight CD boot from the discs that come with Leopard and not run the installer (or at least how do I boot and then exit the installer) so that I can access other programs, run disc utilities, etc?
Thanks!

lowbarprods wrote:
I should have been clearer. Running disc utility was only an example. There are other programs I need to run from the hard drive, but only after a CD boot. How do I exit the installer and access the hard drive?
you can't, not easily. That's not what the install DVD is for. It provides a very limited version of the OS and all the apps you can run are in the Utilities menu.
according to this[macosx hint|http://www.macosxhints.com/article.php?story=20071105135450731&query=insta ller%2Bapplications] you can run some apps from your hard drive while booted into the installer but I haven't tried that and I'm quite sure that most things won't run because of the absence of required frameworks.

How can i get my imac proceed to home page from restarting endlessly? it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

how can i get my imac proceed to home page from restarting endlessly? it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

Hi
My Powerbook was the same. Only fix is to reinstall OSX from the install CD but be sure not to pick the Format and install clean. Once you boot with the install CD pick the preserve user data and settings.
On My machine the reinstall looked perfect. My network, email, files and all the programmes were all there. Most apps worked fine but Adobe CS2, Virtual PC and NetBarrier all needed reinastallation as they reported a few files or registration was missing. I went for the 10.4.3 upgrade again and it worked fine.
Good luck
D

How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP

How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP

Kappy wrote:
Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
Boot into Recovery (hold ⌘R on boot)
Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
Quit Disk Utility
Then Select: Restore from a Time Machine Backup.

How can I get my imac to get valid ip numbers?

how can I get my imac to get valid ip numbers?

Try renewing you DHCP Lease, click on your system preferences and then click network. Select your ethernet connect on the left then click the advance button, when the windows opens make sure the TCP/IP tab is selected then click the Renew DHCP Lease, wait a few minutes and then check your IP address. Also check you DNS by clicking on the DNS tab and taking a look at you DNS servers then should be the same as you other computers.

How can I get my IMac to recognise the scanner part of the HP printer/scanner? It prints!

How can I get my iMac to recognise the scanner part of the HP printer/scanner? It prints!@

I had a similar problem right after the first update to 10.6.7, which happened to quite a few people. It took a couple of software updates and then an HP printer update to fix it. So make sure that all your software updates are up to date. Mine is an older printer: C6280 All-in-one but scans fine now that my mac recoginises it. You might want to check on the HP site also.
It was really frustrating because it had worked fine before.
laverne's mom
Message was edited by: laverne's mom

How can you get a imac to boot from install disc(external drive)

Similar Messages

Maybe you are looking for