How can you get the mail boxes in yahoo onto the e.mail app
How can you get your yahoo mail boxes onto the e.mail app on an IPad mini?
Go to the Settings App
Pick Mail, Contacts, Calendars
On the right side you'll see under the Mail section "Add Account”
Pick that and fill out the requested information
Similar Messages
-
My boyfriend has lost all of his contacts on his phone after downloading the new iphone softwear. why would this happen and how can he get it all back
You don't have to post the same question at one minute intervals. Somebody will answer it, but perhaps not in 60 seconds.
-
How can you get your phone turned back on if the main line phone is being worked on?
My brother shattered his phone & his phone is the main line so my service is off. Is there anyway to get it turned back on?
Hello soccergril2013,
If you unable to get your iPhone to show up on your computer, then pick on of the articles below that goes with the type of computer that you are using. Each article will have you look at using different cables and checking drivers.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for OS X
http://support.apple.com/kb/TS1591
Regards,
-Norm G. -
Really want to get movies from my computer over to the ipad but don't want to sync it to my itunes (it is already sync'd to my wife's) Help!
Importing photos and videos to computer
http://support.apple.com/kb/ht4083 -
How can you get files from your outlook folder from the ipad2 and keep it there for future reference?
It's unclear what you are asking outlook is a mail, appointment, tasks and contacts
Programs outlook have no direct contact with files -
How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP
Kappy wrote:
Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
Boot into Recovery (hold ⌘R on boot)
Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
Quit Disk Utility
Then Select: Restore from a Time Machine Backup. -
How can you get your photos in the order they are in your computer
How can you get your photos synced to your phone in the same order as the file on your computer?
The iPhone Photos app orders photos by date.
-
How can you get your submit buttons on the quiz template to be a single click instead of the default double click? (The option to choose double click or not is not showing in properties for this).
Hmmm... Submit button doesn't need a double click at all. Maybe you are talking about the two-step process? When you click on Submit, the feedback appears with the message to click anywhere or press Y. Is that what you are talking about? If you are talking about a real double-click, something must be wrong in your file. And which version are you using?
http://blog.lilybiri.com/question-question-slides-in-captivate
Lilybiri -
We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?
Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben -
how can you get your passcode off ipod when you can't remember the numbers?
Connect the iPod to its syncing computer and restore via iTunes. If iTunes asks for the passcode and you can't enter the passcode or you do not have the syncing computer, place the iPod in recovery mode and then restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
How can you get your iTunes music back when your iTunes Match expires & you no longer have access to the computer it ws stored on?
Try here:
iTunes: Error 13019 during sync -
How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
How can you get audio for books on the kindle
how can you get audio for books on the kindle
The audio inputs on Macs are line level inputs and not mic inputs. You need a mic with a built in preamp (battery powered) or more conveniently a USB mic or bluetooth headset.
-
How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?
Welcome to the Apple Community.
Unfortunately the Apple TV doesn't have a web browser so you can't do that. -
How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.
You can check the file prefs.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and remove the line(s) related to that extension (procon.password).
Maybe you are looking for
-
Error occurred during activation of iMessage
I did the apple update and now my son's iPod is requesting me to fill in the password for our iTunes account to activate Facetime and iMessage. I fill in the password and it still says there is an error and to try again. Help?
-
Hi All, We have to configure EDI 852 scenario using Seeburger Adapter. We have xsd of 852, what else I need to start the develeopment? Do I need to create the Mapping using BIC mapping, if yes then from where I can get the BIC mapping tool? Or we hav
-
I have been doing research about how to download my clips from my AVCHD card for quite some time now and STILL can't figure out how and what is the best way to do this in Mt. Lion. I have tried exporting them to desktop, dragging them, importing them
-
Hi- we have uploaded forecast into dp using the APO-BW functionality. also have created the CVC. but then the data is not showing up on in the planning book for DP. it says livecache anchor not found. could anyone enlighten us on as to why this error
-
Can anyone pls let me know what is the difference between these 3 terminology? How we r using it in SD?