How can you hook up multiple camcorders for video shoot?

I'm making plans for my wedding and I was interested in recording it with stationary camcorders and my Macbook Pro's webcam of the event. I've hooked up my camcorder before as a additional webcam, but I have't recorded from multiple camera's before. This is importabt because I was also thinking of streaming the video from all 3 cameras online so friends and family could watch the event from out-of-town.
I was thinking I could use my Final Cut Pro software to bring the Camcorder footage in using firewire, but I'm not sure about the computers webcam.
  I would really like any opinions and suggestions that don't require additonal purchases.
Any past experiences would be appreciated.

Hello JamieLG. Welcome to the Apple Discussions!
First, let's double-check your AirPort Express Base Station's (AX) settings...
AirPort Express Base Station Setup (AX) w/High-Speed Cable Modem
Setup the AX
Connect to the AX's wireless network, and then, using the AirPort Admin Utility, check these settings:
AirPort tab
o Base Station Name: <whatever you wish or use the default>
o AirPort Network Name: <whatever you wish or use the default>
o Create a closed network (unchecked)
o Wireless Security: <your current wireless security setting: None, WEP, or WPA>
o Channel: Automatic
o Mode: 802.11b/g Compatible
Internet tab
o Connect Using: Ethernet
o Configure: Using DHCP
o WAN Ethernet Port: Automatic
Network tab
o Distribute IP addresses (checked)
o Share a single IP address (using DHCP & NAT) (enabled)
If you have wireless security enabled, which type is it: WEP, WPA, or WPA2?

Similar Messages

  • Can you hook up multiple pairs of wireless headphones to the MDR-DS6500 base unit

    Can you hook up multiple pairs of wireless headphnes to the MDR-DS6500 base unit or do you need a base unit for every pair you would like to connect to your tv? if you can which models are compatible?
    Thanks

    Do I need an AirPort to attach to each set of speakers that I want to connect, or is there another kind of receiver I can hook up to the speakers that do not have any kind of WiFi or Bluetooth configuration?
    You basically have two choices: 1) Place an AirPort Express base station at each of the speaker locations, or 2) Use an AirPlay-Ready receiver that offers whole-home audio support. The latter would require that all speakers be connected back to the receiver.
    Also, if I am planning to set up the airplay by using the extended network configuration, then the Wifi base station does not need to be an AirPort station? I have Fios and had trouble last time I tried to hook up an AirPort in place of the router that they provided.
    The AirPlay networking protocol requires either a wireless or wired connection between the AirPlay server (typically iTunes) and the AirPlay speaker (AirPort Express, Apple TV, or an AirPlay-Ready receiver or speaker). AirPlay will traverse over an extended Wi-Fi network regardless of which manufacturer hardware is used.

  • Can you set up multiple profiles for I pad

    Can you set up multiple profiles for I pad

    Not sure what you want to do.
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • How can you change your security question for I tunes?

    How can you change your security question for I tunes?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

  • How can you unlock a iphone4s sprint for a family member in russia?

    How can you unlock a iphone4s sprint for a family member in russia? i sold it to them but when they took it back to russia is locked them out as if someone has stolen the phone.

    Contact Sprint to see if they offer unlocking and if you qualify.
    Only the wireless carrier to which the iPhone is locked can unlock it.

  • How can you turn off the sounds for receiving a text or e-mail while on a phone call???

    How can you turn off the sounds for receiving a text or e-mail while on a phone call???

    That's the most stupid thing. It may work but the phone shouldn't be going off in your ear while in use from the start.
    Message was edited by: Ford Truck

  • Hi, We are a physiotherapy practice trying to use i-cal as a clinic diary systaem for 15 therapists. We need to block out availability of therapists but cant do this? How can you block someones diary out for specific times on i-cal? Any help please..

    Hi, We are a physiotherapy practice trying to use i-cal as a clinic diary system for 15 therapists. We need to block out availability of therapists but cant do this? How can you block someones diary out for specific times on i-cal? Any help please..

    iCal is designed for personal use, and isn't really meant to handle this sort of situation.
    The best suggestion I can offer, though it's a trifle untidy, is: create a calendar for each therapist, giving each a different colour. Enter the availability for each therapist - if it's on a weekly basis you can make them repeating events. Then add the individual appointments, which will show alongside in the daily view. In this example, the 'purple' therapist is available from 1030 to 1700 and has appointments at 1200 and 1500.
    If you have more than a few therapists available at any one time it's liable to look a bit messy, but it's the best I can think of at the moment.

  • How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

    How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

    InDesign's PDF export engine does not transcode your videos, they are embedded exactly as they were in the original file. The Flash Player runtime which displays video inside PDF files may not show a perfect match to Quicktime etc. because most video playback tools aren't designed for a color-calibrated workflow, but they should be close.
    The playback quality (blocking and aliasing) will be affected if the clip is not playing at 100% (screen pixels != video pixels) and in PDFs with the standard video player widget, that will only ever happen when you use 'floating window' mode. PDF pages have physical dimensions, so viewing them at "100%" does not make them match screen pixels.
    If you don't mind the video clip being smaller than the media annotation in which it's playing, then use my free upgrade to the Acrobat playback widget - VideoPlayerX - which maintains 1:1 pixel scale until the page is zoomed out too far for it to fit. You can install the widget into InDesign so it's used by default when exporting.

  • How can you set the max row for a 'open cursor' in a stored proc?

    I would like to know how can you set the maximum amount of row returned in a resultset coming from a stored proc?
    You can do it via JDBC with cStatement.setMaxRows(10); but it works only for select that you do via JDBC...
    I would like the same functionality using open cursor inside a stored proc...
    Thanks...

    is "where ROWNUM <= 10" the equivalent of "cStatement.setMaxRows(10);" because the ROWNUM as problem with the ORDER BY clause and the setMaxRows() as no problem...

  • How do you hook up a fire wire video camera to the 13 inch aluminum macbook

    I have a 13 inch mac book with only USB, but a video camera that only has a fire wire output jack.
    How can I hook up the camera with fire wire out to the USB in on the new 13 inch MB?
    Is there an accessory I can buy that will do this? Link to the product?
    Thanks!

    There is no option/accessory to do this. You'll need to get a different camera, or use a computer with firewire.

  • How can you use one NetStream to publish video and audio from another NetStream in AS3?

    Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen.  How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere?  I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved.  The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

    RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
    RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
    How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
    URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

  • How can you change the thumbnail selected for an Album in Photos?

    I'm having difficulty changing the photo that is automatically selected as the thumbnail on an iPad Air and iPad Mini.  How can I change this, and what parameter governs which photo is selected?
    There are a number of threads about changing the name, the creation date, the modified date, and none of those have worked for me.  After changing these various parameters, I have unsynced and resynced photos, and at this point, it is becoming an obsession of mine to change this. :-)
    I would appreciate any input if you've been able to do this in iOS7 and Maverics.  Thanks in advance!
    - Robert

    Okay, now it is working. I had to save the XLSX-file into the older XLS format, but that seems to work quite well.
    But I won't ever understand why InDesign loses its backward compatibility from one version to the other.
    Thank you, -hans-.

  • How can you define a different homepage for a user?

    Hi
    I am fairly new to Application express, I have created an application but I would like to define a different homepage for a user when they login. Of course I can modifiy the PLSQL code:
    wwv_flow_custom_auth_std.login(
    P_UNAME => :P101_USERNAME,
    P_PASSWORD => :P101_PASSWORD,
    P_SESSION_ID => v('APP_SESSION'),
    P_FLOW_PAGE => :APP_ID||':1'
    With a different page, however I would like to setup a different home page depending on the user that logs in - I tried setting up a conditional process specifying P_101_USERNAME but this did not work...any ideas on how this can be achieved?

    Hi
    Thank you for your response, I have created the function:
    create or replace function "GETDEFPAGE"
    (auser in VARCHAR2)
    return VARCHAR2
    is
    Defpage number;
    begin
    select DefaultPageNumber into Defpage from users_table where username='aUser';
    return Defpage;
    end;
    Can you please assist me on how I can call the function in the login process within the block:
    wwv_flow_custom_auth_std.login(
    P_UNAME => :P101_USERNAME,
    P_PASSWORD => :P101_PASSWORD,
    P_SESSION_ID => v('APP_SESSION'),
    P_FLOW_PAGE => :APP_ID||':1'
    );

  • How can you set a Firmware Password for Intel Macs?

    PPC macs can use the Open Firmware Password utility to protect the computer from someone booting of another drive to access your data http://docs.info.apple.com/article.html?artnum=106482
    How can this same protection be accomplished with Intel-Macs? Intel Macs use a different fireware/boot process, so OFP above doesn't work. according to the apple article above, it can be done - but it doesn't explain how:
    "Intel-based Macintosh computers can be protected by firmware passwords as well. The firmware in an Intel-based computer uses Extended Firmware Interface (EFI) technology"

    all I get is...
    Your Firmware is too old.
    The firmware on your machine is too old for Open Firmware Password to function. You will need 4.1.7 or later to use this application. Please visit the Apple website to get the latest firmware update for your system.

  • How can you reset your security questions for the life of me I cannot recall my answers

    how can i reset my security questions

    Click here and search the article for '2 out of 3'. Follow the instructions.
    (74147)

Maybe you are looking for