How can you identify when a RP has a bootflash failure on CRS-1?

Hi Everyone,
I am hoping someone can assist me in identifying when a RP has a bootflash issue and requires RMA. We have some CRS-1 running in our network with IOS XR 3.8.2 and some with 4.0.3. All the commands that I am aware of do not identify when a RP has a problem in bootflash. CCO recommends that if there is a problem with upgrade and you are moving to a code using filesystem fat 32 that you format the bootflash of the RP's. It was at this point we started having issues. We went into ROMMON and recieved the following error.
rommon B1 > dir bootflash:disk0/hfr-os-mbi-4.0.3 Checksum failed on hfr-fslib-m
Expected checksum: 6a53, calculated checksum: beba
open: file "hfr-fslib-m" not found
loadprog: error - on file open
cannot load the monitor library "bootflash:%hfr-fslib-m" from device
If someone has some insight on how we can validate the state of the RP outside of the typical command set:
show redundancy summary
show platform
etc
I'd appreciate it.
Cheers,
Rashmi

Hi,
Provide some more information on your problem.
If you want to check the directory contect try
dir bootflash:
is it displaying any output?
In general above error doesn't indicate that there is any problem but it is not able to find particular directory or file.
Thanks
Parthiv

Similar Messages

How do you identify when a report has finished?

Hi all,
I've got a big report that is taking a while to run (approx 1min) and the problem I'm having is that my users are getting bored of waiting and starting to click around my web application and re-running the report because they think it has failed. The re-running of the report is causing more load on the system and the reports to run even slower. What I would like to do is stop them re-runnning the report maybe by somehow locking the web page until BI publisher has finished but I don't know how to get a message back from BI publisher.
Currently I'm running the BI publisher report by having a button push which redirects the users web browser to a url such as:
'http://'||:BI_PATH||'/xmlpserver'||:BI_DIRECTORY||'/Custom Reports/'||:p180_report||'/'||:p180_report||'.xdo?_xpf=&_xpt=1&_xdo='||:BI_DIRECTORY||'%2FCustom%20Reports%2F'||:p180_report||'%2F'||:p180_report||'.xdo&_xt='||:p90_template||'&_xf=rtf&_xmode=4'
And then as I'm returning an rtf doc the familiar save, open or cancel popup comes up. The problem is that before the popup appears they can re-click the run report button.
One way round it I've thought of is to have the report generate to a file system and redirect the user to a waiting page that checks periodically for the files existance and then when it does exist forward the user to a page with a view report button. This sounds like a lot of effort, does anybody know of a better way?
I've also wondered if running the report using webservices would be an option, is there a way of getting BI publisher to run a web service when a report has finished? This could then interact with my back end server and the web page could act on that, or am I totally barking up the wrong tree?
Any help would be greatly appreciated!
Thanks,
Darren.

Hi Darren
couple of ideas
1. Rather than 'run' the report, get it to run through the scheduler immediately. Once its running through the scheduler you could then poll the scheduler tables to see when it completes. You could either redirect the users to a wait page or show an egg timer until the document has been created. this would require the document to be delivered to somewhere for you to poll as the URL will not return a job id.
2. Bit more involved but probably better is to hook into BIPs web services. So rather than the button issue an http request it calls a servlet to issue a web service call to BIP to schedule a report. The WS will return the job id to the caller, you can then poll the scheduler via a ws to check the progress of the job. Once complete you can then retrieve the result form the scheduler tables via another call.
Food for thought I hope
Tim

How can you tell when your timeline has surpassed making one DVD?

Is there a way that Final Cut Express lets you know that you have passed a certain amount of space to record on one DVD?
Thanks,

There are many variables to this problem. iDVD, for instance, lets you record 1 hour of video [total] for the best quality. It also can record up to 2 hours compressing it down as needed, so you loose quality. If you are using DVD Studio Pro, you have many different compression options, and therefore, you can have different maximum lengths of time that can be recorded onto DVD. Then, there are applications like Burn* that are simple, and don't do menus, so it offers more room for video. Then, of course, you can use a Dual-Layer DVD, which doubles the capacity of a DVD, so there's more content you can burn using iDVD** (or just better quality). I'm sure others can contribute more than I did.
- Craig
* http://burn-osx.sourceforge.net/
** Using iDVD 6

On IOS 7, how can you tell when your battery is charging for your phone?

on IOS 7, how can you tell when your battery is charging for your phone?

thanks everyone=you all helped.
I wasn't used to not getting the 2 sided plug- now I know I am ok>
**hugs**

How can you find an ipod that has been lost

how can you find an ipod that has been lost and the icloud is not turned on

lost/stolen
No app is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
iCloud: Find My iPhone
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
and go to FIndMyiPhone. If the iPod has been restored it will never show up.
iCloud: Find My iPhone
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

How can you know when your Apple Pass word has expired?

How do you know when your Apple password expires?

They were wrong. Apple Passwords don't expire. Unless you choose to change it, your Apple password can stay with you forever.

How can I tell when a video has captions?

Is there a way (an icon or something) to tell when a video has captions? I've paid for several videos only to find out that none of them has captions. How can I tell whether a video has captions before I buy it?
A related question-- Are there any videos in the store now that do have captions? How can I find them?
--Gil

I have the exact same question. One of the main reasons I pre-ordered Leopard for launch-day delivery was that I thought that iTunes and the new iPods would now be able to play captioned videos. I know that it is supposed to work, but I can't find anything in the iTunes Store that says that it has captions. Is there some way to tell, or are there just no videos available yet in the iTunes Store that have captions?

How do you know when Acrobat xI has been downloaded?

How can you tell Acrobat Xi has been downloaded?

What is your operating system? Where did you download it to? Did you also install it after downloading?

How Can You Track a Person That Has Your IPhone And You Want It Back

How Can You Track a Person That Stole Your IPhone And You Want It Back

Log into icloud.com with your Apple ID and use Find my iPhone to track it. If it can't be located that way, there is no way to track it.

How can I tell when a JEditorPane has finished loading the document?

Hi!,
I've got a JEditorPane connected to a viewport and a couple of scrollbars, and I realy need to know when the JEditorPane has completed loading the document, so that I can decide whether to turn on or off the scrollbars.
When I try to check the viewport.getView().getWIdth() right after calling setText() or setPage() the values come out wrong... is there an eventHandler that I can register ?
thanks in advance
-Miguel

OK, I'm not an expert. But, why set the scrollbars manually? Would it not be easier to put the JEditPane in a JScrollPane with the scroll policy set to "as needed"?
Ken

How can I tell when a movie has fully downloaded?

I rent a movie and after a while, AppleTV says it's ready to watch. I hit play and realize the movie really isn't ready to watch. How can I improve this process?

No easy way to do this.
AppleTV only downloads/prebuffers enough video to allow you to start watching while the rest downloads in the background before it says it's ready to play - generally if your internet connection speed is steady this works fine.
Doing other things with AppleTV eg watching trailers, streaming local content, youTube can 'flush' any predownloaded contenet necessitating a restart of the download.
AC

OWB - How can I see when a record has been added or amended

I am using OWB to convert and transform some data from another system. I have
created a primary key constraint and have set the Loading Type to Inser/Update.
What I need to know is how can I update a column in the destination table with
the text INSERT when a new record is inserted or UPDATE when it is updated.

I have found a work-around that does what I need. I have written a function that sits between the source view and destination table, check if the incomming key exists in the destination table and returns a string containing UPDATE, INSERT or EXCEPTION depending on what happens in the function. The value is then passed to the destination table.

How can you tell when your new tablet was first actervated

I bought a HP Omni 10 window's 8.1 tablet display model (last one) and was told it was never turned on ,when i first turned it on windows was activated and the tablet was running and i did not have to set any thing up .
My question is ,is there a place on my tablet that has recored the time it was activated.
Lewis from Australia.
This question was solved.
View Solution.

Hi justlewis. I understand you want to determine when Windows 8.1 was originally activated. This will show you when it expires, but I am not certain how long it takes to expire:
How to Confirm that the Windows 8 System is Activated Successfully
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How can you tell if the line has errors?

I'll try and keep this as brief as possible.
<background>
For 2years (up to 6months ago) I was on BE ADSL and was very impressed with the quality of the service (low latency, decent bandwidth) on my line. However when I heard that FTTC was being rolled out I switched to Zen internet on the understanding that I could then switch to the FTTC product as soon as it was available.
Immediately after switching to Zen I started to experience problems with VOIP (I use VOIP extensions against an externally hosted PBX) and was seeing CRC errors on the line. In the process (~2months) of getting this diagnosed the FTTC product became available and since I wanted uncapped switched to BT Infinity for Business Option 2.
</background>
I now find that again I get sporadic VOIP problems (but not as bad as on the ADSL2 service via Zen) but very regular BBC iPlayer dropouts listening to the radio.
Due to the previous problems whilst on ADSL2 I suspect I still have a minor line fault but as I can't access any stats on the line have no way to verify. Does anyone have any pointers on where to get line stats to see what is going on on the connection? I can't get any info out of the OR modem.
Regarding my network. I am using a cabled, gigabit connection directly to a Draytek 2820n which is in turn doing the PPPoE through the BT OR modem. I use two different machines and experience the same issues on both. I'm a server & network admin by trade so pretty sure it's not my internal infrastructure at fault.
My IP profile is apparently 38717 Kbps down / 10000 KBps up.
BT Speed tester shows achieved 26581 down and 4912 up though

jmansford,
I may be wrong about this as I am only refering to my own 2750n settings,but looking at your upload throughput test results some if not all of your problems could be due to a wrongly wieghted QoS setting and/or port capacity setting based on QoS.
As you line profile is ok at 38717 Kbps down / 10000 KBps up it looks like there is no problem on your actual line,but phone line noise test might find some crackle,but I don`t think so.
By your post,you say your are routing PPPoE through the Draytek into the OR modem.?
If so,maybe you could try leaving the OR or Draytek out of the chain as a process of testing where faults [if any] are.?
To sum up a bit imo leaving the OR modem out of the net chain might be a better way as I only use the 2750n on it`s own as the OR modem is not then needed.
Opps! sorry I might be wrong in my above thinking,but is your Draytek just a router or a modem/router combined like the 2750n.?
But either way the QoS setting are still important.

How can I see when a transport has been made in an other environement?

Hi,
Is there anywhere in SAP where you can see if a transport as been made in an other environement? I'm trying to figure out if a transport in the DVL environement has been made in the SANDBOX environement. I tried SE10 transaction, but it seems that once the transport has been made in an other environement, it doesn't appear in this transaction anymore.
Thanks, points will be given if helpful.

Hi,
Thanks for the transaction code, but my question is not answered yet.
For example, I use STMS_IMPORT in the Development environement to see the list of the transport that has been made in that environement.
I now have a list of these transports, with a status. But I wanna know if that transport that has been created in the Development environement has been moved to the Sandbox environement.
STMS_IMPORT shows me only the list of transports that has been created in that environement. It doesn't tell me if a transport in DVL has been moved in the QAS, SANDBOX or PRODUCTION environment.
Thanks again,
Julien

How can you identify when a RP has a bootflash failure on CRS-1?

Similar Messages

Maybe you are looking for