How can you see a date on a picture

When you take pictures how can you go back to see what date you took them

Not in the Photo app. You can after you import the photo to your computer. I have not checked to see if there are any apps allow you to view the date. Photoshop Express does not.

Similar Messages

How can i see the date of the pictures i took? help!

how can i see the date of the pictures i took? help!

Import them to your computer (see http://support.apple.com/kb/HT4083) and the date and other exif data will be available.

How can I see the dates of all of my app downloads (free and paid) from the iPhone? If this is not possible, from the computer? Is there an apple website for this?

I would like to know how I can check the download dates of all of my iPhone 4 apps from the phone itself, the free apps downloaded too. Is there a website I could go to to see these?
If not, how can you see this on a PC?

View Purchase History
http://support.apple.com/kb/HT2727

How can you see what the WLC ACL is denying?

How can you see what the acl on our WLC5508 is denying? The counter keeps on going up but what is getting blocked is nowhere to be seen.

You are right but you can monitor that through the hits counts on the (WLC)Security->Access crontrol list === Hits
It will give you some idea for trouble shooting also you have the cmd line for details analysis.

How can I see the date on my photos taken from my iPod touch

how can I see the date on my photos taken from my iPod touch...

The requirements for the app are:
Requirements: Compatible with iPhone, iPod touch, and iPad.Requires iOS 5.0 or later.

How can I see website data from itouch 4th generation? My 8 yr old may have been on inappropriate sites and I need to see the data from website data stored on the itouch.

How can I see website data from itouch 4th generation? My 8 yr old may have been on inappropriate sites and I need to see the data from website data stored on the itouch.

There is no way to see where he has been.
Go into Settings > General > Restrictions > Safari and turn it off. Then add the MacGruff browser from the app store. After that go back to Restrictions and turn off the ability to add apps.

How can you see all the open tabs?

When I use the drop-down Windows menu, it only shows the name of the window, not the tabs within each window. And I don't an option for "Activity Window" (like on Safari), or anything else that will show me all open tabs. How can I see them, as flipping through every open window is a pain....

Hi,
You can try to set '''browser.allTabs.previews''' to true in [http://kb.mozillazine.org/About:config about:config]. (In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear. Click '''I'll be careful, I promise!''', to continue to the about:config page.)
[http://kb.mozillazine.org/About:config_entries about:config Entries]

HT5616 How can you see a list of devices registered to use our apple ID for FaceTime and other services?

Sometimes I will get a notification that x device is using my apple ID for FaceTime (or other services). Sometimes it is just generic Mac Book Pro. His can I see which devices are using my ID (and can you see more details than just the name)?

I just started getting this message too. Just started the last couple of days. It doesn't give a time that it was used. All it says that "appleid" was used to sign in to facetime on Macbook. My Macbook is not named "Macbook." It also doesn't correlate to times when computer is being used.

How can you copy form data from an online PDF, in your browser?

Just a quick query, I've recently filled out an online application and I filled this out on an online PDF form. This is the form link:
http://3fivetwo.com/dloads/application_pack_-_admin_long10.pdf
How can I copy the data I typed into this form, to a word document for example? Or is there any way I can save this as a PDF with all the data in the form, to send it as an email?
I've downloaded the form, but it just shows blank pages with no fields filled.
Thanks very much!

download the form to your local disk
open it with Adobe Reader and fill in all the details
save it
send the completed form by email

How do I see the dates that the pictures were taken?*

How do I find the dates that each picture was taken? It would be like right clicking and seeing when the picture was taken or saved. I can't find this info anywhere.

Hi catswalk,
iPhoto is the photo app on a Mac. If you have Windows, it would be under My Photos, or Pictures - not sure exactly. But basically, the picture information is only available on a computer as a direct part of the photos. You should be syncing your iPhone to iTunes on a computer so that you can back up all of your stuff. If you have iCloud, that backs up some things, but not your entire photo library - only your Photo Stream and Camera Roll from your iPhone.
So, really, it depends on what type of computer you are syncing with.....
However, there is an App in the App Store called Photo Investigator. It is free, but the free version comes with ads. For .99 cents, you can remove the ads. Once it is installed, you can select any photo on your phone, and it will give you not only date and time, but a lot of other info that you may or may not care about.
There probably are other apps available to do what you are looking for as well....
Hope this helps!
Cheers,
GB

How can you see a hidden Datasource?

Using Crystal Reports v.11.0.0.1282 I have written a report, which is running through a C++ program. I recently had to change Datasources, and now, the report will only run on the c++ program if the data is in the old datasource and not the new one. When I look at the datasource location expert, I only see the one I had just changed to. However, when I look at the dependancies I see this problem:
Error Data Source: Verify for table Command failed. Possible report corruption. C:\acclaim\reports\Invoice Support.rpt
Warning Data Source: There are unlinked tables in your report. In some cases this could lead to an excessive quantity of records. C:\acclaim\reports\Invoice Support.rpt
Also when looking at or trying to change the links, I see this error:
More than one datasource or a stored procedure has been used in this report. Please make sure that no SQL Expressoin is added and no server side group-by is performed.
How on earth can I see where the problem is. I believe as the writer of the c++ program does, that it is still referencing the old Database, but I can't see it.
PLEASE HELP!
thanks you in advance!

this is an ODBC connection, but yes I have tried a redo of the connection.
I also can run the same query though my SQL manager, and get the results which I see in my report. There does not really seem to be a problem with my report. The problem seems to be with the program which is using it. The man which had written is, is adamant it is not his program, and I am adamant that it is not my report. However, the above errors may indicate that there is in face an error with my report. I haven't been using crystal reports for very long so it's very frustrating when there is no documentation helpful to the errors.

How can I see the data in the aggregates

how can see the data available in the aggregates.
Jay

Hi Jay,
its so simple,
please goto the manage aggregates screen and copy the technical name of the aggregate and add
/bic/exxx xxx is the aggregate technical name, and for f fat table use /bic/fxxx, and go to se16 and enter the table name and thats it ur data is with u.
R

How can we see Last Date and last quantities in Bex Analyzer ?

Hı BW Gurus,
I have a query that shows consumption quantities for a material regarding to a date interval. On initial screen i specify a material and a date interval ( 01.04.2007 - 15.04.2007 for example). Then query brings total consumptions(261 and 601 movement types) for materials. I set up the query according to stock cube.
But my client wants the last consumptions (last 601 and last 261) quantities and dates in a different columns. When we include calendar day it can be seen easily all the lines day by day. But we dont want to include calendar day. Thus for one material only one row will be exist. Report template will be like that:
On initial screen we defined april 2007 , Output:
Material         Total consump. quantity     Last Consump. Quant.   Last.Cons.Date
XYZ                         457                                 76                        18.04.2007
PS: 76 is included in 457.
How can we achieve this result?
Thank you all indeed
Evren Temiz
Message was edited by:
        Evren Temiz

Hi Evren,
What do you mean?
Regards.

How can you see matching tags in code view?

I'm trying to figure out how to do a very basic, common function in DW CS5.5 that's pretty much in every other IDE I've seen.
In NetBeans, for instnace, when you load a program, then click on a DIV tag, the program automatically highlights the end /DIV tag later in the code. This is extremely helpful when trying to find the extent of a section, especially in complex sites where nesting of DIVs is common. The function works the opposite way also, where you can highlight the end tag and the system will find the beginning one.
I can use the Coding Toolbar to collapse that section, expand it, and other things, but nowhere do I see a function that will just highlight the beginning and ending tags.
Is this possible in DW? If so, how can I set it up to do that?
Thanks.
Korky

That’s a limitation. No way around it.
Bob

How can i see the date and time of iPhone pictures, How can i see the date and time of iPhone pictures

I would Like to know where i can see the date AND time on a picture i take With My iPhone? AND if not on the phone automaticly,.. Why not?... If even the cheapest phones provide this BASIC info.

You can get this info if you have iPhoto for your phone (costs $5) - you can also try out the app I made (free) https://itunes.apple.com/us/app/photo-date/id605218393?ls=1&mt=8 Would love to know what you think!

How can you see a date on a picture

Similar Messages

Maybe you are looking for