How can you see matching tags in code view?

I'm trying to figure out how to do a very basic, common function in DW CS5.5 that's pretty much in every other IDE I've seen.
In NetBeans, for instnace, when you load a program, then click on a DIV tag, the program automatically highlights the end /DIV tag later in the code. This is extremely helpful when trying to find  the extent of a section, especially in complex sites where nesting of DIVs is common.  The function works the opposite way also, where you can highlight the end tag and the system will find the beginning one.
I can use the Coding Toolbar to collapse that section, expand it, and other things, but nowhere do I see a function that will just highlight the beginning and ending tags. 
Is this possible in DW? If so, how can I set it up to do that?
Thanks.
Korky

That’s a limitation. No way around it.
Bob

Similar Messages

  • How can you see what the WLC ACL is denying?

    How can you see what the acl on our WLC5508 is denying? The counter keeps on going up but what is getting blocked is nowhere to be seen.

    You are right but you can monitor that through the hits counts on the (WLC)Security->Access crontrol list === Hits
    It will give you some idea for trouble shooting also you have the cmd line for details analysis.

  • How can i see number of T code which to assinged to perticular user with di

    Dear All,
    How can i see number of T code which to assinged to perticular user with discription.
    Which report i have to be execute with T code.
    reply me.
    Thanks,
    Regards,
    sachin

    Hi
    Try transaction S_BCE_68001426, or repor RSUSR010 (The Same)
    Regards
    Morten Nielsen

  • How can you start the tag config editor from a vi or when labview starts?

    how can you start the tag config editor from a vi or when labview starts?

    Hi,
    There is a VI called "dsc_TagEditorLauncher.vi" under "C:\Program Files\National Instruments\LabVIEW 7.1\project\lvdsc" folder that can be used to launch the TCE programmatically. I hope this helps.
    Best Regards,
    Remzi A.
    Applications Engineering
    National Instruments

  • If i tag a song in itunes how can i see the tags in finder on a macbook pro

    if i tag a song in itunes how can i see the tag in finder on a mcbook pro

    Those tags are not shown in the Finder.
    Metadata is generally displayed in the program designed to organize and display the content type, such as iTunes, iPhoto, etc.

  • How can i see the text of one view?

    I want to see the text of one view stored in my Oracle DB, then i run the next query:
    SELECT TEXT FROM ALL_VIEWS WHERE VIEW_NAME = view_name;
    The problem is that the information return me truncated.
    How can i see the text of one view?
    Sorry, my English is terrible.
    I'm from Argentina.

    Use 'set long 100000000' at sql prompt. Run your query again.

  • How can I see all the Transaction Code that the client is using?

    How can I see all the List of Transaction Code that the client is using?

    Hello Sugauli,
    Did you mean to ask
    transaction types the client is using?
    instead of
    transaction code
    If so, go to SPRO (in ERP system) and follow this path:
    Sales and Distribution -->
         Sales -->
             Sales Documents -->
                 Sales Document Header -->
                      Define Sales Document Types
    All the transaction types that are not used have an X in the column Block.
    Easwar Ram
    http://www.parxlns.com

  • How can you see all the open tabs?

    When I use the drop-down Windows menu, it only shows the name of the window, not the tabs within each window. And I don't an option for "Activity Window" (like on Safari), or anything else that will show me all open tabs. How can I see them, as flipping through every open window is a pain....

    Hi,
    You can try to set '''browser.allTabs.previews''' to true in [http://kb.mozillazine.org/About:config about:config]. (In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear. Click '''I'll be careful, I promise!''', to continue to the about:config page.)
    [http://kb.mozillazine.org/About:config_entries about:config Entries]

  • How can you see a date on a picture

    When you take pictures how can you go back to see what date you took them

    Not in the Photo app.  You can after you import the photo to your computer.  I have not checked to see if there are any apps allow you to view the date. Photoshop Express does not.

  • HT5616 How can you see a list of devices registered to use our apple ID for FaceTime and other services?

    Sometimes I will get a notification that x device is using my apple ID for FaceTime (or other services). Sometimes it is just generic Mac Book Pro. His can I see which devices are using my ID (and can you see more details than just the name)?

    I just started getting this message too.  Just started the last couple of days.  It doesn't give a time that it was used.  All it says that "appleid" was used to sign in to facetime on Macbook.  My Macbook is not named "Macbook."  It also doesn't correlate to times when computer is being used.

  • How can I see ID3 tag info on TV w/o buying extra gadget e.g. dlo/griffin

    With a simple A/V connection cable, how can I see the ID3 info of the song playing e.g. the name, album name etc. (basically the iPod screen) on TV?
    I know aabout DLO or Griffin accessories, but I do not want them... they do not work so great... Is there a firmware update I need or anything simple?
    Thanks a lot

    You probably are not aware, they use s/w to control the iPod through their remote and create a different screen on TV.
    Try Griffin and let me know. It is $105-ish in Best Buy. Or try DLO HomeDock Deluxe which is around $150.

  • How do you change Matching Tag Highlights color?

    I just updated my Dreamwever CC.
    I have my code coloring set to be dark. I don't like too much white as the background when I'm coding...
    with the new update, I spotted the new change right away, it's great, I like the idea of highlighting matching tags, but I want to change the color to match my color theme and so I can read my codes. this is what I have...
    would someone know how to change the color? thank you.

    You can change the color of the tag highlight by
    Go to DW preferences
    Choose Code Coloring
    In the bottom you will see tag highlighting enabled with a check mark
    Change the color by using the color well below that Tag highlighting preference

  • How can you see a hidden Datasource?

    Using Crystal Reports v.11.0.0.1282 I have written a report, which is running through a C++ program.  I recently had to change Datasources, and now, the report will only run on the c++ program if the data is in  the old datasource and not the new one.  When I look at the datasource location expert, I only see the one I had just changed to.  However, when I look at the dependancies I see this problem:
    Error     Data Source: Verify for table Command failed. Possible report corruption.     C:\acclaim\reports\Invoice Support.rpt
    Warning     Data Source: There are unlinked tables in your report. In some cases this could lead to an excessive quantity of records.     C:\acclaim\reports\Invoice Support.rpt
    Also when looking at or trying to change the links, I see this error:
    More than one datasource or a stored procedure has been used in this report.  Please make sure that no SQL Expressoin is added and no server side group-by is performed. 
    How on earth can I see where the problem is.  I believe as the writer of the c++ program does, that it is still referencing the old Database, but I can't see it. 
    PLEASE HELP!
    thanks you in advance!

    this is an ODBC connection, but yes I have tried a redo of the connection. 
    I also can run the same query though my SQL manager, and get the results which I see in my report.  There does not really seem to be a problem with my report.  The problem seems to be with the program which is using it.  The man which had written is, is adamant it is not his program, and I am adamant that it is not my report.  However, the above errors may indicate that there is in face an error with my report.  I haven't been using crystal reports for very long so it's very frustrating when there is no documentation helpful to the errors.

  • How can you see what the actual fonts look like in menu?

    In WORD - when you go to the menu bar to see the fonts, you'll see maybe a hundred of them - but you see them the list in the "actual" font style of each font! So in a few seconds you can actually "see" a hundred font types - makes it easy to quickly select which one you like.
    I can't seem to do this in FCPro 5.04. I must click each font from the menu bar - type a word and THEN I see what it looks like. VERY TIME CONSUMING if you don't know your fonts!
    Isn't there a way in FCPro se see all the fonts in a list in the actual "style" of each font - like WORD does? There's a haxie called "Fontcard" that does exactly this - but not in FCPro!
    Can anybody do this - or I'm dreaming here - just keep checking them out 1 font at a time!!
    Thanks,
    Larry

    Larry,
    If you're not in too big a hurry when using Title 3D, you can scroll through the font list. As you go from one font to another, the characters you have highlighted will show in that font. Other than that, I use FontBook to preview fonts quickly.
    -DH

  • Inability to RESUME download in ffox - how can you see if server supports resume e.g. any of the filehosts

    hi: i have been trying to dl from filepost (file size 260) and occasionally it stops at 240.
    i tried the answer in support to "dummy resume:"
    https://support.mozilla.org/en-US/questions/672203?esab=a&as=aaq
    it did not work.
    how can i test if the site allows resume?
    or do i need to test for a specific file on that filehost allows resume?
    thankyou

    Hi Cor-el
    I found Opera. Opera browser does not compare to firefox greatness. Nor does their support help forums.
    But Opera does have RESUME button on their download window.
    The trick with opera, is to open the download manager in a new window, and make it look like Firefox great add-on DownloadManager Tweak.
    then it looks the same, so you know what your doing
    AND it has a download / RESUME button
    fyi:
    > I tested Opera Download on all the failed ones (trying the tricky rename workaround) '''Opera RESUMED in all 9 test cases.'''
    > and where i could not get firefox to resume, not once in all 9 test cases.
    so my conclusion is the workaround is not very good. And it had nothing to do with the server i was downloaiding from (in these 9 test cases)
    perhaps..... in a future version: - firefox can also have the wonderful resume button, and the add-on Download Manager TWEAK, can also have the RESUME download button.

Maybe you are looking for

  • Adding a link to open document

    Hi How to add a link to open a document in same browser.

  • IPod Touch and  iOS5 = shorter battery life

    My iPod Touch battery life is terrible after upgrading to iOS5 ... why, and is there anything I can do to make it better?

  • Behaviour of GL Accounts in Hierarchy Nodes

    Hi experts, We have a BI report on Financial statement version. We have a hierarchy used on GL Account. In the hierarchy in a node, suppose in the node Assets some gl accounts are maintained. And another node Liabilities some gl accounts are maintain

  • IME API and IME Text Input Enhancement

    Hi All, I am presently using Adobe Air 1.5 Framework and i want to update the Air 2 Beta version. Help me in setting the same. As in my application, it uses TLF which doesn't supprot IME. But as i came to know the features from AIR 2 Beta it provides

  • Printing iTunes album art in Leopard

    Since installing Leopard I have been unable to print album art or text from iTunes. There is no problem printing from other applications.