How can you see Software Update compliance breakdown by Client?

I want to see a view in the Software Library that breaks down by client what is shown in the "All Software Updates" node.
Basically, with SCCM 2012 you can see all the software updates and there compliance summary which is nice, however I can't find a way to see a detailed version of this that breaks this all down by client.  
For example if I have a Software Update that is Required on 5, Not Required on 3, Installed on 4, and Unknown on 2 clients I want to know which specific clients make up those numbers. I want to know which clients are required, which are not required, which
are already installed and which are unknown.
There doesn't seem to be a view like this in SCCM 2012 and its very odd that it doesn't provide this look into the data.
Am I missing something, can someone point me to the way to see this data quickly.

I am aware of that view however that is just mapping the state number to a name for several different "TopicTypes". And the one you are point to is actually not for Software Updates Scan Status. The TopicType for a Clients Update Scans is 500,
which has 0-3 only. 0 is supposed to be Unknown, 1 not-required, 2 required, and 3 installed.
They set the status for an endpoint/update for 2 and 3 but I have several Unknown, and Not-Required and they don't write those rows to the database if they are in that state. 
It seems when they are gathering data from the client the summarize everything, and one keep the specific rows for clients if they are required or installed, and they don't create a row for the other states. From some digging it looks like they stored this
data in 2007, but dropped in in 2012.  
Maybe it is to conserve space or something I don't know but its stupid. It would be nice if there was a hidden setting that would enable it to store these rows as the database is set to collect them, they just don't.
FYI...
For WMI Queries you can use SMS_StateInformation which maps to the v_StateNames.

Similar Messages

  • How can you see what the WLC ACL is denying?

    How can you see what the acl on our WLC5508 is denying? The counter keeps on going up but what is getting blocked is nowhere to be seen.

    You are right but you can monitor that through the hits counts on the (WLC)Security->Access crontrol list === Hits
    It will give you some idea for trouble shooting also you have the cmd line for details analysis.

  • HT4623 how can i download software update on iphone 4s, there is option of software update

    how can i download software update on iphone 4s? there is no software update when i click on General.

    Connect to iTunes on your computer and select "update."
    iOS: How to update your iPhone, iPad, or iPod touch

  • How can i find software update on an i phone

    how can i find software update on i phone

    An iPhone 3G can't be updated past 4.2.1 and therefore won't ever have the Software Update button. To update it to 4.2.1, connect it to iTunes on a computer, and if possible, the one it's normally synced with.
    (83744)

  • How can you see all the open tabs?

    When I use the drop-down Windows menu, it only shows the name of the window, not the tabs within each window. And I don't an option for "Activity Window" (like on Safari), or anything else that will show me all open tabs. How can I see them, as flipping through every open window is a pain....

    Hi,
    You can try to set '''browser.allTabs.previews''' to true in [http://kb.mozillazine.org/About:config about:config]. (In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear. Click '''I'll be careful, I promise!''', to continue to the about:config page.)
    [http://kb.mozillazine.org/About:config_entries about:config Entries]

  • How can you see a date on a picture

    When you take pictures how can you go back to see what date you took them

    Not in the Photo app.  You can after you import the photo to your computer.  I have not checked to see if there are any apps allow you to view the date. Photoshop Express does not.

  • HT5616 How can you see a list of devices registered to use our apple ID for FaceTime and other services?

    Sometimes I will get a notification that x device is using my apple ID for FaceTime (or other services). Sometimes it is just generic Mac Book Pro. His can I see which devices are using my ID (and can you see more details than just the name)?

    I just started getting this message too.  Just started the last couple of days.  It doesn't give a time that it was used.  All it says that "appleid" was used to sign in to facetime on Macbook.  My Macbook is not named "Macbook."  It also doesn't correlate to times when computer is being used.

  • How can one time software updates to allow uploading at off peak times?

    How does one time software updates to allow uploading at non peak periods?

    Apple has plenty of servers for handling the downloading of software updates.  There is no optimum time since the updates are available worldwide.  Anytime is a good time. 

  • How can I disable software update in the settings of our company iPad?

    Hi, Just need your help guys. How can I disable or hide the software update settings in our company's iPad? Our company don't want to update all the iPad fixed asset to our employee. Thanks.

    There are two files that ought to change when you set your preference:
    "/Users/yourname/Library/Preferences/com.apple.systempreferences.plist"
    "/Users/yourname/Library/Preferences/com.apple.scheduler.plist"
    Try moving both of them out of the prefs folder. Then launch System Preferences and reset your preference to whatever you want (or uncheck the box altogether). See if that works. If it it does you will have to also reset your other System Prefs, since all will be returned to the default. If it doesn't do the trick, you can put the originals back and thus avoid the resetting.
    Francine
    Francine
    Schwieder

  • How can i save software updates to a stick

    Please I need help, and before I start I do apologize if this is somewhere else I have searched endlessly but found nothing very helpful. Okay, I am on a very slow dial up, please don't suggest get rid of the dial up -believe me if only I could! Very sore point but dial up is the only option I want to download the software updates and share it with a buddy ( who has dial up as well ) so how can I do this? I did read somewhere when the software screen is open to press the update button, then press download only, which I did for iTunes 9.2. Beauty got it downloaded, only took all night and the opened package and updated it, which worked fine, then I dragged the package on to a stick to put on the other Mac , all seemed to go well, then tried to open iTunes 'big problem' it's gone, I managed to get iTunes back from 'time machine'. Can someone please tell me where I went wrong ? Thankyou in advance

    I would think so. In any event if you use SU with the option set to save the files, then they should be on your hard drive. If they are not in the Downloads folder then look for them either in the /Library/ or /Home/Library/ folder in a separate folder that may be named Updates.

  • Can't see software updates; can't print; browser images garbbled

    Recently my boss' G4 Powerbook 17" running OS X 10.4.11 started displaying garbled images in Safari and Firefox. We reinstalled the OS, ran disk utility and now he has problems printing multiple page docs over the network or take credit card payments over the internet as well as still having the images show up distorted in the before mentioned browsers. Funny thing is he can work fine from home using his wireless internet. Thinking it was the ethernet card we took the puter to the local apple store where they connect it to their network via an ethernet cable. Wouldn't you know it, it worked perfectly on the automatic setting. We brought it back to the office, sprayed it out with canned air and we are back to square one. We have 3 tried different ethernet cables, different router ports, different IP addresses and still no improvement. It seems like there is some kind of blockage not allowing all the information in or our of the computer. Worst problem is that we cannot see the updates on the popup window after hitting software update.
    Any ideas?

    Well, that wasn't the problem. It has started up again. The computer was working fine this morning then it seemed as employees were coming in and turning on computers it went back to normal. Could it be a networking issue?

  • How can I view software updates?

    ML now appears to take me to the App Store app for OS updates, etc.  I don't see an option now that allows me to view the updates I've applied to my machine.  I'm specifically thinking of firmware updates, etc., like the SMC update for the Power Nap.  I can't see that I downloaded it (not via the App Store), and I can't find an option that allows me to see what was installed, and when (sometimes very important to know the when as well).
    I've perused System Info, and don't see anything there either.

    Please READ THE QUESTION AND DETAILS.
    I know Software Update is done via the App Store - the question is - how do I see what's been applied AFTER THE FACT?
    I have no "Software Updates Installed" option anymore that I can see to see WHAT was installed, and WHEN.

  • How can I reinstall Software Update?

    I have a MacBook Pro (early 2008 model) running OS 10.6.8.
    When I try to run Software Update, I immediately get an error message that says "Software Update cannot be opened because of a problem.  Check with the developer to make sure Software Update works with this versio of Mac OS X. You may eed to reinstall the application.  Be sure to install ay available updates for the application and Mac OS X."
    I have never encountered this error before today, but I can not figure out a way around it now.  I have tried researching the problem, restarting the computer, etc, and can't figure out what to try next.  Can someone please help me figure out how to fix this?  I cannot find a solution anywhere.
    Here is the full Problem Details and System Configuration:
    Process:         Software Update [706]
    Path:            /Users/Heather/Backups/Backups from Macintosh HD (trashed HD-March2012)/System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
    Identifier:      com.apple.SoftwareUpdate
    Version:         ??? (???)
    Build Info:      SoftwareUpdate-355000000000000~3
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [94]
    Date/Time:       2012-09-22 18:52:55.694 -0700
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          679 sec
    Crashes Since Last Report:           1
    Per-App Crashes Since Last Report:   1
    Anonymous UUID:                      D2DC893B-ED7D-4431-9564-4315EFCF1E8E
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/Install.framework/Frameworks/DistributionKit. framework/Versions/A/DistributionKit
      Referenced from: /Users/Heather/Backups/Backups from Macintosh HD (trashed HD-March2012)/System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
      Reason: image not found
    Binary Images:
        0x7fff5fc00000 -     0x7fff5fc3be0f  dyld 132.1 (???) <29DECB19-0193-2575-D838-CF743F0400B2> /usr/lib/dyld
    Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.27f3
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST9750420AS, 698.64 GB
    Parallel ATA Device: HL-DT-ST DVDRW  GSA-S10N
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0xfd400000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1a100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x820f, 0x1a110000 / 4
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0230, 0x5d200000 / 3
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x5d100000 / 2

    it said it wasnt installed correctly
    What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

  • I've plugged in my Ipod shuffle and the device does not appear in Itunes.  How can I see or update the music on it?

    I've plugged my Shuffle into my MacBook Pro and Itunes did not pop up.  I opened Itunesmyself, yet the device was not showing and I had no 'device' tab in the top right corner next to 'Itunes store' tab.  Therefore how can I update the musci on this shuffle or see what the problem is?  Thanks

    Hi Swill79,
    Thanks for visiting Apple Support Communities.
    You may find the tips in this article helpful for troubleshooting your iPod connection:
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    Best,
    Jeremy

  • How can you see matching tags in code view?

    I'm trying to figure out how to do a very basic, common function in DW CS5.5 that's pretty much in every other IDE I've seen.
    In NetBeans, for instnace, when you load a program, then click on a DIV tag, the program automatically highlights the end /DIV tag later in the code. This is extremely helpful when trying to find  the extent of a section, especially in complex sites where nesting of DIVs is common.  The function works the opposite way also, where you can highlight the end tag and the system will find the beginning one.
    I can use the Coding Toolbar to collapse that section, expand it, and other things, but nowhere do I see a function that will just highlight the beginning and ending tags. 
    Is this possible in DW? If so, how can I set it up to do that?
    Thanks.
    Korky

    That’s a limitation. No way around it.
    Bob

Maybe you are looking for

  • Creative Zen 32GB "There is a problem playing this audio" AAC

    GCreative Zen 32GB "There is a problem playing this audio" AACZ All right, this is driving me nuts. I have a Zen 32GB and a Vista 32-bit machine. I have been encountering a lot of problems playing AAC files on my Zen--many of the tracks stop short, a

  • Midnight Release Website Problem

    While it's not a major issue as to if I purchase from BB or a particular store I'm very curious if the midnight release checking site is broken or if it's lack of information that I'm missing. I'm trying to use this http://www.bestbuy.com/site/misc/b

  • Can I watch TV through a Slingbox on my remote HD TV using Apple TV?

    Can I watch TV through a Slingbox on my remote HD TV using Apple TV if, how do I do that?

  • PDF printing to brother mfc 6890 cdw

    Hey, Having a problem printing from 64 bit windows 7 Acrobat 9 to Brother mfc 6890 cdw. All my Adobe updates are current, but everytime I try to print a pdf document (nothing massive, just say a 7 page pdf of a3 autocad line drawings) it prints about

  • Create change request

    Hi, I have program which change data in tables by the user . when the user save his change i want a popup like in sm30 that will ask him to create change request. his there any fm that will do this or something else?? Thanks.