How can you stabilize the text in firefox to keep it from defaulting every time you start firefox?
Every day that I access Mozilla Firefox I have to change the text size from the previous day on all of my websites. I have a windows 7 64-bit system.
It looks like your question posting duplicated: https://support.mozilla.org/questions/988040
please continue there
Similar Messages
-
How do I stop one extra tab from opening every time I start Firefox?
Every time I open Firefox, my Yahoo homepage opens, but an additional page also opens which has a variety of website thumbnails and nothing else on that page.
In my Options, I have ONLY www.yahoo.com selected as my homepage, so only ONE page should be opening every time I start Firefox.
However, no matter what I do, this second page continues to open every time. It's very irritating, as half the time I've already begun to enter data into my homepage, then the second page pops up and switches to that and I'm typing on that page.
Please advise.@jscher2000
Thank you!! That fixed the problem. The only add-ons I have are for my anti-virus software WebRoot, but somehow I must have installed Speed Dial without realizing it.
That fixed the problem. Greatly appreciated!! -
plugin update page appears every time I open firefox. All of the plugin updates are green.
i downloaded and restarted version 18 and still get the plug in page loading it is driving me crazy if i don't find a solution fast i am getting rid of what used to be a great browser hope some one can help me
-
How can I make the text larger in this flashing box from Old Toad?
I'm trying to use flashing text here: http://web.me.com/phelpssculpture/Site/hands_on.html
which I copied from OldToad's site here:http://web.me.com/toad.hall/Demo_1/Miscitems.html
I can't figure out how to make the text larger.
Any suggestions?
Thanks, DavidAt the end of the code, you can find
document.write('You can add Blinking Text!');
insert a "size" attribute to "font" tag (eg. size="10")
document.write('You can add Blinking Text!'); -
The small "[Javascript Application] and balance.balance is undefined" pop up window is followed by a pop up that shows a caution sign and the number 3. They repeatedly pop back up when I click on the OK button or X, I must click them 10 times before they go away. Then Firefox seems to run normally until I exit and try to return later to Firefox.
I uninstalled Firefox and reinstalled it with no effect. I have also run any troubleshooter that seemed to remotely refer to this problem with no effect.
This does not happen when I load Internet Explorer or Google Chrome. Except for this problem, I much prefer Firefox over either one.hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, probably an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] -
I crammed the info into the subject line, but to repeat...
Every time I start Firefox, the Plugin Check runs. Every ... single ... time. Very annoying. How do I get this to stop?
AND
I installed Adobe Acrobat at least 3 times, but it still shows up as "outdated". Obviously, it only truly installed once, but I tried clicking the button in vain hope that that will fix it.
But really, I simply don't want the Plugin Check to start every time.
thxAlas, I already tried setting it to False (read it online somewhere) and it doesn't work. Perhaps if you could give guidance on why the Adobe install isn't completing, that would solve the plug-in check issue... Fingers crossed.
-
How can I get the "text" field from the actionEvent.getSource() ?
I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
public static void main( String[] args ) {
JFrame f = new JFrame("JFrame");
f.setSize( 500, 500 );
ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
buttonsArr.add( new JButton( "first" ) );
buttonsArr.add( new JButton( "second" ) );
buttonsArr.add( new JButton( "third" ) );
MyListener myListener = new MyListener();
( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
JPanel panel = new JPanel();
panel.add( buttonsArr.get( 0 ) );
panel.add( buttonsArr.get( 1 ) );
panel.add( buttonsArr.get( 2 ) );
f.getContentPane().add( BorderLayout.CENTER, panel );
f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
f.setVisible( true );
public static class MyListener implements ActionListener{
public MyListener() {}
public void actionPerformed( ActionEvent e ) {
System.out.println( "hi!! " + e.getSource() );
// I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button). -
How can I make the text bigger in iCal?
How can I make the text bigger in iCal? I've looked at Preferences and View.
Sorry, did not see that you are using 10.6.7
-
How can i make the text bigger?
How can i make the text bigger?
1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you. -
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
repeat
try
if (the clipboard as text) is not "" then exit repeat
on error
end try
end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
end if
end repeat
end try
end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
local le_texte, la_largeur, la_hauteur, myNewDoc
my activateGUIscripting()
Extract properties of the source/target cell *)
set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set selection range to range (name of column colNum1 & name of row rowNum1)
end tell
Cut*)
my raccourci("Numbers", "x", "c")
Trigger Preview *)
tell application "System Events"
if "Preview" is not in (name of every application process) then launch application "Preview"
end tell
delay 0.2 -- required
New document from the clipboard *)
my raccourci("Preview", "n", "c")
Rotate to left *)
my raccourci("Preview", "l", "c")
Copy *)
my raccourci("Preview", "c", "c")
Quit *)
my raccourci("Preview", "q", "c")
(system attribute "sys2") < 7
if result then
Click the [Don't Save] button in the warning sheet *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview" to tell window 1
name of buttons
repeat 50 times
delay 0.1
if exists sheet 1 then exit repeat
end repeat
tell sheet 1 to click button 2
end tell
end if
Back to Numbers *)
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
end tell
Paste in the cell *)
my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if -
How can I view the text messages sent and received on one of the other phones on my plan?
You would have to view them on the other phone.
-
How can I change the text color in pages
Hi , how can I change the text color in pages app
Select the text you want to change.
Tap the i in the top bar.
Tap Style in the top bar.
Tap the Font name/size
Tap Color then choose the color you want the text. -
How can I modify the text of the automatically created emails of WAS 6.40.
Hi community,
I have a question. How can I change the text of then email which ist automatically send by the EP6/WAS6.40 when I create a new user. The email displays the message "Dear Sir or Madam, your user xzy was created with the following password xxx."
How can I modify this text. Where is it located in the Enterprise Portal / WEBAS 6.40 .
Thank you.
Best Regards,
Olaf ReissNot easily or readily available as of now. It WILL be part of the new features in the NetWeaver 04 release. (*This same question was asked in my EP6 certification class one week ago and this is the answer I got.)
Found this guide in another post...it should help doing what you need manually...
http://help.sap.com/saphelp_nw04/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm
Hope this helps!
CS -
I have added metadata in Prelude. How can I see the text in Premiere?
I have added metadata in Prelude. Now in Premiere, I can see the "speaker" but none of the text I added. How can I see the text in Premiere?
Message was edited by: Kevin Monahan
Reason: More searchable titleBoth the Project and Metadata panels in Premiere Pro have a Metadata Display dialog that allows you to select which metadata properties are displayed. To access this dialog, right-click the panel's tab and select Metadata Display.
-
How can I fix the text in my photo book that reads"your default text had not been edited. Printed books will not include this text?"
You will get this warning, if your book includes textboxes that still include the default text, like "Insert Title". You need to find these boxes and add your own text. Look for boxes like this:
Make a PDF-preview of your book and look, where the preview differs from what you are seeing in iPhoto.
iPhoto, Aperture: Previewing an order in iPhoto or Aperture
Maybe you are looking for
-
ICloud and Multiple Apple ID Mess
Hi, I seem to have made a mess of my iCloud and AppleID accounts. Here's the timeline: Years ago when I got my first iphone (3G), and being a canadian customer, 1) I signed up for a US appleID with primary emailA so I can access the US iTunes store
-
Iphoto simultaneous expoting of photos and videos
Hi everybody, I was recently organizing photos and videos in my iphoto libary, exporting and saving them to portable hard-disks. However, videos and photos are both mixed in my iphoto, and during the exporting of the files videos and photos were sele
-
Too many values.Not displaying all the data
Hi All, I have facing the problem, while showing the map for different location. It says that Too many "ColumnName" Values. I cant find any where what is the limitation while representing the maps....... Please share any one have aware of it.
-
OBIEE and Oracle Apps (E Business Suite) SSO implementation
Hi Gurus, We are using apps 11i and OBIEE 10.1.3.4 . I would like to ask that is there any doc which could provide me steps of SSO implementation between both. Or if not in doc is there any body who incorporated the same. Here we dont have DAC and ET
-
Why don't I see the download arrow on my toolbar?
The down arrow indicating downloads used to be on my toolbar but is now gone. If I customize Firefox I can't find the arrow to drag onto the toolbar, so the only way I can see my downloads is if I go to my homepage and then click downloads at the bot