How can you tell if all photos in an event have a Place assigned?

How can you tell if all photos in an event have a Place assigned, without clicking every photo in the event individually with the Info bar open to see if there is a little map in the bottom left hand corner please?
cheers

Terence Devlin wrote:
File -> New -> Smart Album
Event -> Contains -> Name of Event
Plus
Place -> Does not contain -> leave the last field blank
Thanks for that, just getting used to these brilliant smart albums, do I have to have one of these smart albums for every event though? can I not just use it for all photos?
cheers

Similar Messages

  • Referenced masters:  How can you tell where a photo's master is?

    After reading many recommendations on this site, I have set up my main library on my internal HD with referenced masters on an external HD.
    Now I need to import a job which I shot out of state and which was saved as a managed library on my MBP. So I copied it to an external drive and then Imported it into the main A3 library. That worked just fine but it seems like it copied all the masters as well as the versions from that new library into the main one.
    Before I try to relocated them, how can I tell where the master for a particular photo is located?
    Thank you very much.
    Bo

    Versions are always in the Library (they are text instructions saved to a file and applied on-the-fly to the Master in order to produce the image on screen (mostly)). Masters are either in the Library (in which case they are "Managed"), or not in the Library (in which case they are "Referenced"). The Library is a "package". A package is a container of files which shows as a single file to the user.
    Badges tell you the status of the Master on which the Version is based. No badge = Managed. Referenced Masters show a badge. Off-line Referenced Masters show a modification of this badge. Versions with Missing Masters show yet another version of this badge.
    Badges can be toggled to show or not via the Metadata Overlays. All seven of the Metadata Overlays can be customized.
    Use the filter Rule "File Status" to filter for "Managed", "Referenced", "On-line", "Off-line", and "Missing".
    If you want to move all Manage Masters to your external drive, in Photos view filter using the "File Status" Rule set to "Managed", then select all and "File→Relocate Master".

  • How can I tell if a photo in an event is associated with a gallery?

    How can I tell by looking at a photo in an event if that photos is currently being published to a gallery?
    Alternatively, is there a way to make an event automatically tied to a gallery so that when the event is added to or changed, the gallery is also?
    In general I'm having trouble deciphering the connection between galleries and events.
    Thanks.
    A Musliner

    Welcome to the Apple Discussions. What I do for my web gallery photos is to flag them. That tells me in the Photos mode or Events mode which photos I've used in a web gallery. You could use a keyword to do that also.
    There is no unique connection between a web gallery and Event. A web gallery can be create from photos in multiple events. Generally speaking most users will assemble the photos in an Album and then create the gallery from it. Just makes getting all the photos into one group easier. Once a gallery is created it is no longer directly connected to that album, i.e. adding new photos to the album will not update the gallery. New photos have to be added directly to the gallery.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • How can you tell who the original sender of a group text is on an iPhone 5, when all that appears is a list of recipients in no particular order

    how can you tell who the original sender of a group text is on an iPhone 5, when all that appears is a list of recipients in no particular order? I can't seem to identify the sender in the details list.

    Start a separate thread to the original sender.

  • HT4914 How can you tell which songs are downloaded from the cloud on an ipad

    How can you tell which songs are downloaded on the iPad from the cloud?

    I know ipad albums are more like tagging photos rather than putting them in folders. I just have a nagging feeling I missed some pics and I have too many to try to go figure out one by one. I don't look at my photos from the camera roll, only from albums I tagged just because I imported photos from different sources and the dates and order is really messed up. I just want to know that I am viewing all the photos from like this vacation or that event and there's none I missed that are only in the camera roll.

  • How can you tell if a file is being used in your project or not?

    How can you tell if a file in your bin is being used in your project or not? My director dragged hundreds of reference files into my project and only used a few of them. I'd like to do some house cleaning and delete the ones that are not in use. This project file has 100 sequences in it, so it would be a tough manual hunt to figure this out.
    In Premiere Pro (or Flash for example), where all the information is in the Project Bin such as in/out times and duration, there is where it tells you how many times that piece of media has been used or if it hasn't been used yet.
    Can FCP tell me this info?
    Thanks for yout time!
    -Monty

    Monty,
    Within FCP, there is a menu item called "Media Manager" (depending on what version you are in). This would be worth your while to look into. It basically organizes your project by moving/archiving any used assets of a project and leaving out un-used assets. It saves a ton of disk space.
    For example, say you have a 5 minute clip with an in/out point that is just 30 seconds. Media Manager will "archive" just that 30 seconds, not the entire clip. There is even a setting that you can add additional "handles" time to the front andd back of the clip if you think you may need to add or change transition.
    Do a google search. I was just watching a few Youtube videos on this myself.
    Jonathan

  • On IOS 7, how can you tell when your battery is charging for your phone?

    on IOS 7, how can you tell when your battery is charging for your phone?

    thanks everyone=you all helped.
    I wasn't used to not getting the 2 sided plug- now I know I am ok>
    **hugs**

  • How can you tell which cabinet you are connected t...

    As the title says, how can you tell once installed.
    the reason i ask is where i live there is only the bt-pcp and the drl-fttc cabinet and no others.
    from what i heard is that both BT and DRL occupy the same fttc cabinet, and this would suggest so based on other information received.
    yet from other information i'm hearing is that they don't and we're probably wired all the way back to the exchange which i would have thought was a bit odd seeing with 3 miles from exchange (as the crow flies).
    so is it possible that they use the same cabs?

    hi,
    yeh am on infinity now and so far working fine
    had one disconnection but thing that was caused by outage as took router a few attempts to re-connect, but other than that my pppoe has only dropped when made a change on router which required it to restart.
    now been connected for 8 days without dropping (usually dropped every weekend when on DR) so continuing to monitor.
    the engineer advised was connected via the cabinet in street, but only cabinets are the bt-pcp and the dr-fttc cabinets, and AFAIK BT and DR share the cabinet from what I've been previously told, but then someone else has said they won't do that and the connection is probably one that is underground if there is no bt-pcp.
    i'll send Dean a message just so i know for future as i know the bt-pcp cabinet my number is connected too.

  • Movie length - How can you tell???

    Hi All,
    This is a really dumb question but how can you tell how long your movie is. I've dragged some clips down to the project library window but can't for the life of me work out how to tell how many hours/minutes it is. i can tell how long each clip is but figured getting a calculator out and adding them all up didn't seem the Apple way of doing things. iMovie HD 6 was way easier to use (at least it had a simple timeline you could scroll across and see where you were and at what time. I don't need scrubbing that badly).
    Message was edited by: Damographics

    problem solved, it didn't exactly jump out at me at first but I found the spot. Sheesh this new imovie is totally different from the previous versions.

  • HT201250 How can you just back up photos. 2000 of them

    How can you just back up photos with Time Machine. 2000 of them

    peterz911 wrote:
    I am a photographer and trying to backup my photos. I would be using Seagate Backup Plus USB 3.0 , 1TB.
    I am very computer illeriate so please dumb it down so I understand.
    Hook up the Seagate drive (don't use their software) to the Mac and a TimeMachine window should appear, click yes and let it work for hours until completed. Hook up occassionally and it will backup your entire boot drive.
    If you need to format the drive, open Disk Utiltiy in your Applications > Utilities folder, click on your new drive on the left and Partition, 1, Option GUID and OS X Extended Journaled as the format and click apply.
    You should get another external drive, this will be your storage drive for a duplicate of all your photo's.
    Connect it to the Mac, format it the same way as above, then you need to drag and drop your photo's to it.
    If your photo's are in iPhoto, then inside your Pictures folder is a iPhoto Library, drag and drop it onto the icon of the external storage drive every time you want to make a backup.
    The first time you drag and drop, it will copy it.
    The next time you do it, it will ask if you want to replace the iPhoto Library with the new one.
    If your sure you want to do this, then say YES.
    If you want to make multiple dated backups of the iPhoto Library, double click on the external hard drive icon and it will open into a window.
    Use the Finder > New Folder and you can click on the name and change the type to date, then drag the more recent copy of iPhoto Library to that folder.
    This way you can have more than one copy of the iPhoto Library on the external storage drive at the same time as they are in folders. This way you can create a archive of dated photo's.
    Good Luck, and take a class or have someone teach you about basic OS X user interface.

  • How can you tell if a pic hasnt been tagged by iPhoto, and do you then...

    How can you tell if a pic hasnt been tagged by iPhoto, and do you then do you then have to draw "missing box" around them
    What I mean is tagged a few faces, imported some more pics, checked a few and they dont show as named faces, but are faces that are in my Faces source list (ie identified and named)
    So do I then have to draw a box around known faces to me, and name them again (I think iPhoto will pop up as Im typing the names I already have)
    It just means that even when i import and it doesnt name, I may have lots of pics that are of faces but not tagged and so not in my faces source list
    please help
    cheers
    ps when are Apple going to upload the Getting Started manuals for iLife 09? its been a while since released now, ad they give a bit more insight than the video tutorials alone

    No-one? It'll be nice to know how many pics of faces that arent yet tagged
    cheers

  • How can you tell if your podcast is streaming or if you're playing from a download?

    Yesterday I downloaded a podcast with the new Podcasts app on my iPhone. To play the podcast (while away from my WiFi), I tapped the episode in the Episodes list. I assumed I was playing the downloaded version. This morning, when I checked my data usage, it was 87MB more than it was yesterday! Does this mean that I inadvertently STREAMED the podcast instead? How can you tell?

    This is the itunes forum.  Your question seems to have nothing to do with itunes.
    Basics from the manual are restart, reset, restore.  Try those.

  • How can you tell if your iPhone 4s is locked or not, without replacing sim?

    Hello everyone.
    I'm new to the site and iPhone world,
    How can you tell if your iPhone 4s is locked or not, without replacing sim?
    Any tips or tricks?
    Supposably, Sprint iPhone 4s prior to Nov.11th are unlocked, in what extend this true?
    thanks in advance.

    Call Sprint and ask

  • How can you tell what resolution a movie is?

    How can you tell in iMovie 09 what resolution a movie is?
    The only two have used were HD and standard, but we are not sure which in our collection are which.
    Is there an easy way to tell?
    Thanks.
    mac

    Easiest way is to open the clip using QuickTime Player. Then click Command-I to open the inspector.
    (Or click WINDOW/INSPECTOR)

  • How can you sync ipad 2 photos to pc not using the cable or icloud sync?

    How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network, How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network

    Thanks for that, that was my first suggestion but he wants to not email either. His problem is he used his old nokia to do it and it was fine, now anything other than that he thinks is too much hassle.

Maybe you are looking for