How change colors of clips in imovie, how change colors of clips in imovie

Hi, is it possible to vary the colors in iMovie on iOS?

Hi Kiran,
no its not possible through Theme editor also ,because these colors are coming from Compiler which u are using.
Regards,
Govindu

Similar Messages

AE How to Change the color of a movie clip?

I have a movie clip of a White Show Avalanche. How can I change the color from White to another earthly color. I would like to post 2 images, one still of the white avalanche and one still image of the color or look I am after. Can you post or attach images to this thread? If so how?
I am not just trying to change the Hue/Saturation.

To elaborate on Ko's post: In RGB space, White is presented by full values of 1 (or 255, if you like that better) for Red, Green and Blue. Since there's no differential between the individual components, there's nothing to shift the Hue. Hence you will have to find alternate ways of recoloring your stuff.
A simplistic way would e.g. be using effects such as Tint, Tritone or Colorama based on the Luminance. A more elaborate way would be cutting up the whole thing in multiple pieces (debris, shadows, waves, edges) and color correct each part individually. In any case you will very likely have to work with multiple instances of your layer and apply some masking here and there.
Mylenium

How do I change the color of the clipping path in CS5

Just installed Photoshop CS5 I use the pen to create a clipping path for isolation. In CS4 the path line always contrasted with the background I was working on. In CS5 it is only gray so I cannot work on grey background pics as I cannot see the path. How can I change it back to multi colored like CS4?
In CS4 I could change between gray & colored by enabling or disabling OpenGL Drawing from Edit->Preferences->Performance. This does not work for me in CS5. I really need the color as I am isolating a dark gray bike againsr a lighter gray wall. I keep loosing the curve handles against the wall.

Which means that the wall isn't neutral gray, it has some color in it. Anyway, that's beside the point. In CS5 they've changed the way they display paths when OpenGL is turned off (probably changed to another API behind the scenes) which caused these problems. If i've understood it correctly, this isn't a bug per se, it's just a limitation of the API that they're using now (lack of blend modes or some such).
If you want the old way back then you can try making a feature request/bug report here: https://www.adobe.com/go/wish

In the latest version of iMovie how do you change the duration of the clips

In the latest version of iMovie how do you change the duration of each clip?

Try 'window' (in the menu bar)>movie properties>settings
http://help.apple.com/imovie/mac/10.0/#mov4e66c1a8b

How to change color on multiple text clips

I just finished creating a video with a lot of moving text. It's about 40 mins long. The client wants the text color to be different in the video. My problem is I have multiple text clips (hundreds) that I need to change.
Is there a simple short cut to do this. I love how in fcp you can use the past attributes feature to paste drop shadows and other motion elements on multiple clips. I haven't seen this option for color though.
Thanks,
Cody

JCWBU38 wrote:
Thanks Mjax4,
That's definitely one way to do it. The only negative is having to render all of that.
You cannot simply copy/paste the color...
Here's another way to do it. Note: this isn't really elegant AND it's still going to require rendering - so it might not work for you. But, I guess with any 'workaround' you've got to weigh the pros & cons, though, eh?
Anyway, you could
1.) Put a Color Solid on the video track above one of your titles.
2.) Set the solid's color to the exact color you want the titles to take on.
3.) Set the solid's composite mode to "Travel Matte-alpha". (This will use the alpha info. from the text clip to cut a hole into your now-colored solid.)
4.) Copy this clip to all the other titles, above them.
Again, this is just another workaround...so your alternatives are:
• Bear down and re-do all the graphics properly...time-consuming!
• Use one of the "other" techniques and wait on a render.
They both cost you time. But at least with rendering - you can do whatever else you want while it's happening. It's wait-time. Not WORK time. Up to you!
Hope this helps.

How do it change the color of the background in a still photo in a imovie picture slide show

how do it change the color of the background in a still photo in a imovie picture slide show

LOL - I had the same problem. Hidden in plain sight! All I saw was Numeric, and thought "Duh! Of course it's numeric - it's a slider!"
I do think NI could do a much better job on this, perhaps with more informative labelling. Slider Scaling or Scale Format might be better. Also, since one can select the Digital Display by itself on the front panel, one should be taken directly to the digital display formatting when Properties is selected, instead of still having to change the dropdown. By selecting the digital display instaead of the slider, you're implying that you want to change its format only.

How do you change the background color not of the video clip, but the background the clip is on?

How do you change the background color upon which the clip resides...
I don't want to change anything within the clip itself, but the matte(?)
from black to white or cream.
I am working with Elements 10...

Create a color matte of the desired color and place it on video track 1. Then place your video on track 2.
from here: Adobe Premiere Elements Help | Creating specialty clips
Create a colored matte for a background
You can create a clip consisting of a full‑frame matte of solid color, which you can use as a solid background for titles or animated clips.
Brightly colored mattes can serve as temporary backgrounds to help you see transparency more clearly while you adjust a key effect.
Click Project Assets.
In the Project Assets panel, click New Item from the panel options and choose Color Matte.
Choose a color in the Adobe Color Picker dialog box, and click OK.
A color matte clip is placed into both the Project Assets panel and the Expert view timeline.

How to change the clip's duration under imovie 10.0.3?

How to change the clip's duration under imovie 10.0.3?

This is a new feature introduced in 10.0.3 which works fine for me. The old way was to select Modify - Fast Forward. You can only select certain speed ratios but a slider should appear near the top of the clip which allows finer speed adjustment. have you tried this?
Geoff.

How to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.

How can I change the duration for all clips in iMovie 10.2

How can I change the duration for all clips in iMovie 10.2? I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

How do I change the color of the clipping path

Just installed Photoshop CS4 I use the pen to create a clipping path for isolation. In CS3 the path line always contrasted with the background I was working on. In CS4 it is only gray so I cannot work on grey background pics as I cannot see the path. How can I change it back to multi colored like CS3?

The paths are often hard to see against certain backgrounds and I don't know how they can be changed.
If the path is hard to see, alter the opacity of the layer temporarily or apply a Levels adjustment layer.

I DRAG AND DROP A VIDEO CLIP FROM THE EVENT BROWSER THAT IS 7.9 SECONDS INTO MY IMOVIE I'VE STARTED AND IT CHANGES IN THE PROJECT TO 4.9 SECONDS - HOW CAN I KEEP THE LENGTH THE SAME

I drag a video clip from Event to Project into my imovie I've started. The video clip length changes from 7.9 seconds to 4.9 seconds. How can I stop that length from being changed?

If you are using transitions either side of the clip they will use some of the clip to generate the effect, there isn't anything you can do unless you remove or shorten the transition.
If you aren't using transitions it may be that you are only selecting part of the clip in the event window, try dragging out the yellow frame to include all the video you want in the project.

How can I change the background color of black clips?

"iMovie Help" says to double click (or "apple i" or file ⇒show info), then "Click the color box and choose a color for the clip". I get a "Clip Info" window, with "Name", "Media File", "Size", "Capture date", and "Duration", but it does not have a "Color box". I know this should be a simple task. Thanks to any for their time and expertise.

Hi dosrio - what was the origin of the black clip? If it was a title 'over black' you are best to re-do it, with 'over black' unchecked.
If it was really just an 'empty space' formed by dragging the existing clips to the right, then it must be first converted into a black clip (Control-Click it, and select 'convert empty space to clip'). Then double click it, and the resulting info box will include a colour selector. Note that this is a simple way of creating any colour clip you want. You must be in Timeline mode to create it, after which it will show up in both Timeline and Clips View.

How to change background color of title in iMovie '09?

My issue is that for animated title slides that I insert with iMovie '09, I can only choose from about a dozens backgrounds and colors. I want the background to be red, but the default red is not the shade I need and there does not appear to be a way to adjust the brightness.

danfo wrote:
... I can only choose from about a dozens backgrounds and colors. I want the background to be red, but the default red is not the shade I need ...
imagine the background as a 'still' or 'photo':
create your special shade of red in any 'Paint' app (Pixelmator, Photoshop/element or iWorks/Keynote ..) , save it as a jpeg, drag it into your Project, add title on that.
btw: in case you'll distribute your movie by DVD, don't be too colorful, too 'bright' with red ... old SDef video ddn't like 'red' ... or 'green' ... or 'grey' LOL ...

How do I change the font color in my iMovie titles?

I have selected the title, and a color from the color wheel, but the titles remain white. What do I need to do?

There are only certain titles that have that SHOW FONTS button available. When you select one of those titles....highlight your text, then push that button...you'll get a pop-up window that will give you about 9 differnt font selection, the same about of color selections and then sizes from 1-9. You just move your cursor around as you move around the highlight text in your title will change to show you what it would look like if you clicked on that FONT, COLOR or SIZE.
If you don't like those you can click on the system font panel button in the lower left hand corner and go to town there...
Hope this helps...

How change colors of clips in imovie, how change colors of clips in imovie

Similar Messages

Maybe you are looking for