How change management and cluster IP for the two Faric Interconnects

I have to change IPs. How do I do this by using the console? It was easy enough setting it up, but something else when I have to change the addresses...
This is not production
Message was edited by: Atle Dale

Atle,
This should help you:
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/2.0/b_UCSM_CLI_Configuration_Guide_2_0_chapter_0100.html#task_2A93612BB74B49F5947FC916CB2E3571
./Abhinav

Similar Messages

Change Management and Test Workbench for documentation

Hi,
I would like some clarification on the association between change requests and test workbench.
I'm going through scenarios such as creating a maintenance project, creating a task list and service message and then creating a transport request.
During these steps, I want to document the test results prior to migrating these transports into the production system.
My questions are - how do you link the maintenance project and also urgent corrections to a test procedure and documentation. It appears that by using solar01/solar02 and stwb_2/stwb_work, these tests are linked to a project and not necessarily a "change request"
I greatly appreciate if you can elaborate the association between the various areas a bit clearer for me.
Thanks!!!

You need to look for information on usage type "DI", "Development Infrastructure" or "NWDI" (all common abbreviations for the same thing). There were some very good presentations on NWDI at TechEd this year.
Here are some links to help documentation:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/63/7a4d40eae76f13e10000000a1550b0/frameset.htm">Administration of the Development Infrastructure</a>
<a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developersguide">SDN NetWeaver Developers Guide</a>
Rich

How to rate and give review for the product in SharePoint Contoso demo site by the customer/user from publishing site?

Hi,
I am new to SharePoint, and am working on Contoso demo site.
I want to know where to give star rating and review for the product in SharePoint Contoso demo site. Even after spending enough hours i didn't find solution for this problem. All the answers i got was changing the List/Library settings -> Rating settings,
if i follow that, i get the rating column displayed in my catalog site. How can i bring it on my publishing site and let the customers give rating or review for the product from publishing site. Is there any OOTB feature in sharepoint or it shoul be customized.
Thanks in advance.
Akshaya

Are you using the Content Search Web Part? Just tweaking that once the source library has had the rating column applied should work. Have you tried this?
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How to manage different supply parameters for the same item based on demand quantity?

We are using unconstrained ASCP. We have some products that can be produced in a 'small' machine or can be produced in a large tank. If ASCP has created a planned order for a quantity less than 1000 it will be made on the small machine with the supply quantity = demand quantity. For example, we have a demand of 250, we will make exactly 250 on the small machine. But if the demand quantity is greater than 1000 we will make the supply in the tank with a fixed order quantity of 1590. Financially it will cost us less to do this and scrap the difference because the small machine is very expensive to run compared to the tank.
The challenge is, say we need 1200. ASCP generates a planned order for 1200 and all the dependent demands support 1200. Now we want to make 1590 and we are short of materials. This assumes we have set the item with no supply parameters. On the other hand, if we set a fixed order quantity of 1590 but only need 100 then we we have to scrap the materials for the balance due to a short shelf life.
Any ideas how to set a supply quantity using different parameters based on the demand quantity?
Mark Madal

Hi Mark,
I personally don’t see any standard solution for this requirement especially with an unconstrained plan.
However, if it is feasible, you can try below solution with a 'constrained plan with decision rules enabled' and check if it works,
1.   1. Define two different items – Item A and Item B
2.   2. Item A uses small machine in its routing and can have any demand that is below 999. So, Max order quantity = 999.
3.   3. Item B uses Large Tank in its routing and is a substitute of item A. Also, fixed order quantity = 1590.
4.   4. Define component substitution relationship between A and B. A and B will have identical BOM.
In a constrained plan with decision rules enabled, optimization logic will ensure that planned orders are generated for Item A whenever there is demand below 999. And for Item A, supply will always be equal to demand quantity. When the demand is more than 999, optimization engine will select substitute item B and will generated fixed supply of 1590 for it.
Check if this satisfies your requirement.
Regards,
Durgesh P
(Please mark this post helpful or correct, if answered)

I have a fourth gen iPod Shuffle and I cannot find anywhere how to manage and view songs on the ipod, in iTunes 11 there is no intuitive way to view the songs at all. I guess Jobs thought, "why would anyone want to do that..lets make it impossible"

I have an ipod shuffle...4th gen.
I use iTunes 11. When ipod is
connected is shows but there is
no intuitive way to view and manage
songs on the product.
under the icon is only RECENTLY PLAYED and RECENTLY ADDED.
Click on the icon and then select music up top of the app does NOT
show you what is in the ipod but what is stored in itunes.
I am now thinking this was a Steve Jobs joke he played on customers.
Does anyone know a definative way to view and manage songs or
a third party app that permits it.?

I hav the same problem. When I "Control" click on the small triangle to the left, I do not get an option to pick Music.

HT1645 Hello, does anyone know of good DVD burning software for Mac? I've got two 8 min 25 sec mov files to put on a DVD with title and a menu for the two. I've tried it with iDVD five times, each time waiting over an hour and then getting an error mess

I have a short film I produced and I need to burn off copies however I am having no end of trouble with finding a simple DVD burning programme.
I tried a few but no luck. I am trying with mov files and I can't see where the cog is happening. If anyone has any good and relatively inexpensive solutions, please let me know!
Thanks so much!
Cheers

Welcome to the forums.
If you'd like to continue trying with iDVD, one of Apple's resources shows HT 1645 to be an encoding error (http://support.apple.com/kb/HT1645), so I would suggest starting a new iDVD project and set the iDVD Preferences to make sure they match to your project. In particular, you should be using the Pro encoding setting or Best Performance for projects with a total length under an hour (http://support.apple.com/kb/PH5417).
Roxio Toast is an excellent burning tool and part of my work flow after I've used iDVD to create a disk image. Toast will not have the nice iDVD menus, but can do many other tasks besides DVD creation. (Disk images can help in the DVD creation process -- here's one of many discussions: https://discussions.apple.com/message/15469221#15469221)
John

How can I manage several ID on my computer, one for my iPhone and another one for the iPad of the family?

Hi everybody
Just have bought an ipad2 and i would like to manage several IDs on my computer (i.e keep my iPhone ID and create another one for the ipad to manage apps for my iPhone (4) and the apps for the iPad).
How can I resetup the iPad to create that new ID on itunes?
Thanks for your help
Jp

If you have separate iTunes accounts for the two devices then you'll need to buy 2 copies of any app that you want on both device - you can't copy or move apps from one account to another (they are tied to the account that bought/downloaded them). If you want to reset the iPad then logout of the account on it (Settings > Store and tap the id on the right-hand side) and then Settings > General > Reset > Erase All Content And Settings will reset it back to factory defaults.
You may want to consider one of three options mentioned on this page http://support.apple.com/kb/HT1495

My phone was stolen, I have moved it in lost mode,but I can see that whoever has it,is changing phone name and can use it until I activate lost mode again.Can I do it permanently? How can I cancel ICloud back for the stolen phone,it blocks Cloud memory?

My phone was stolen, I have moved it in lost mode,but I can see that whoever has it,is changing phone name and can use it until I activate lost mode again.Can I do it permanently? How can I cancel ICloud back for the stolen phone, as I cannot delete the stolen phone backup (says that backup is being in use) and this is keeping memory occupied in the Cloud and I cannot back-up the other devices.

http://support.apple.com/kb/ht2526

Webinar: Change Management and Transport in the Enterprise Portal

SAP NetWeaver Know-How Network Webinar:
Change Management and Transport in the Enterprise Portal
Wednesday 21 July 2004
11 a.m. EDT
On Wednesday 21 July, Scott Jones hosts the webinar titled Change Management and Transport in the Enterprise Portal as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Scott describes his webinar presentation:
Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments. This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting. We'll also look forward to Change Management enhancements coming with Netweaver 04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hello,
In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
SAPnote 727180 - Version of PAR File in Manifest File
denies this.
Can you clear this out?
Kind Regards
Koen Van Loocke

Is there a relation between the Engineering Change Management and MM

Hi SAP MM Gurus,
Is there a relation between Engineering Change Management and Materials Management? I know we get the versions changes updated in Material Master. But do not know where is the origin for ECM. Step by step configuration is appreciable.
Thanking in Advance.
with regards
Ravi Babu

Hi ,
I have created an application and have created end users also who will be using this application. For each of these users i have to give access to application in such a way that they will be able to see only their area a work. So how do i do this ..this needs to done based on the login user_name..my question now is how or from where will i get the current session details like user_name, current session id ,current session date and time?
Thanks in advance,
Bhargavi

I have a new iPod Touch and one apple ID. I want to use My laptop aswell as my desktop computer for the one ipod, using the same apple ID. I have music on both computers and want to merge the two without losing any music or apps. How do I do this?

I have a new iPod Touch and one apple ID. I want to use My laptop aswell as my desktop computer for the one ipod, using the same apple ID. I have music on both computers and want to merge the two without losing any music or apps. How do I do this?
My iPod has music and apps from my apple ID that I downloaded to my iPod via iCloud and some apps that I got free from the store, straight onto my iPod, but my laptop has some music on it aswell, separate from my other library. I want to put the music from my laptop into my iTunes library which I want to use on both computers. Is it possible to do this?
Thanks.

- You can only sync an iPod to one iTunes library/computer. You can however, manually manage music and videos among different libraries.
Go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
- If y wnat to switch syncing libraries/computer see:
go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
If all the synced media like music is in the iTunes library of the second computer it is very easy.

Minimum steps required for Change Management and Incident management

Hello experts,
Does anyone have a check list of the absolute minimum steps required for getting Change Management and Incident management functioning in Solution Manager.
I just need it to function with creating changes and incidents and be able to assign them, change their status and close them.
The purpose is to get an idea if this is something for us to use. If we then find it useable, then we will go for a full scale implementation using official guides, education etc.
I just need an absolute minimum guide for demonstrating the functions, and if you guys have any recommendations, things we should pay special attention to or other experiences feel free to tell me.
Thanks in advance.
Regards,
Kenneth

Hi,
There are a number of Blogs in the SDN about Charm and ServiceDesk, explaining first steps and more.
Check these to start:
http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
The Complete ChaRM Solution
Change Request Management scenario: Usual questions and known errors
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
Regards,
Jan

What is the relationship between Change management and Issue tracking?

What is in general change management and what is issue tracking in a SAP point of view?

Hi
See this thread
Re: SAP APO
Additional inputs :
APO refers Advanced planned and optimizer
APO is similar to BW in the sense it is also a OLAP processor intended for reporting needs
Supply chain management
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/79eb3cad744026e10000000a11405a/frameset.htm

When i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it

when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help

Hello Todd:
I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
I hope that this works for you, Todd! ~ Brian

TS1702 when i try to update an application it tells me that my account is not valid for use in the UK and have to switch to the australian store to update?how do i switch stores/countries for the applications?? Thanks.

when i try to update an application it tells me that my account is not valid for use in the UK and have to switch to the australian store to update?how do i switch stores/countries for the applications?? Thanks.

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311

How change management and cluster IP for the two Faric Interconnects

Similar Messages

Maybe you are looking for