How change my "from" name in emails?

Just had Infinity BB installed. Very impressed with speed although engineer had to run an Ethernet cable from ground to first floor which has dropped performance. Am now “playing about “ with emails using BT Yahoo. When composing an email I note my “From” line always appears as J BLOGGS (Note Caps.) followed by my btinternet email address. I would like to change this to something less formal, such as my Christian name followed by the name of my business. So it would now read...
… Joe. Causeway Art Studios. (followed by my btinternet address).
Any ideas? I'm a newbie as you gather.
Solved!
Go to Solution.

pinballwitch wrote:
Thanks gg, yes I've done that,and the name is there fine,  but I don't want the actual email address I'm sending from to appear as well.... I want a different reply address (for a small voluntary organisation), and even though I've typed that into the relevant box, it's still showing the actual one I'm sending from.
This worked before with my previous provider, but stopped when I switched from them to BT.  I can still use the old account but not make changes like that any more.  So I set up a new sub account for these emails, but is that maybe a problem, that it's a sub account and not my main one?  Am I asking the impossible here?
Hi.
As you've set all the relevant boxes including the reply-to box, and you had similar settings with the previous ISP (who were they by the way ?), then I can't see anything to change this directly.
With your previous provider, what email address was showing against your name when you sent emails ? Did you actually have the organisation email address set in the "From" address in Outlook ? If so, you can stil do this - but you need to associate this address with your BTinternet email address. It's called address verification. See my shortcuts, link below, option 0e. It looks complicated to a certain extent, but once done you can then change the "From" address in Outlook and not need to set the "Reply-to" box.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Similar Messages

  • How do I change the "From" name connected to my email in iCloud email?

    How do I change the "From" name connected to my email messages in iCloud?

    Hi,
    Both modems are on a same network or 2 different networks ? If on TWO networks, the printer can see 2 networks and on the setup menu you have to select the new network, enter security code (if any) then pick it as default.
    Now your machines on the same network might see 2 logical printers, one offline and one online, the online is the one connected to the new modem.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • ABAP Email Sending Program: Change Display user name in email

    Hi All,
    I have developed an email sending program using function module SO_NEW_DOCUMENT_ATT_SEND_API1. It is working fine but there is requirement that when the customer receives email, in the display name of sender, there should be some fixed name. But here in this case it is picking the Sy-uname i.e. system user name who is triggering the program.
    I also tried the FM SO_DOCUMENT_SEND_API1, but it only changes senders email address, and the requirement is to change the display name in email.
    Regards,
    Nikhil

    You will have to use ABAP class CL_BCS. With it you can specify the sender, both the address and the name.
              lv_smtp_addr = iv_senderaddress.
              lv_smtp_name = iv_sendername.
              call method cl_cam_address_bcs=>create_internet_address
                exporting
                  i_address_string = lv_smtp_addr
                  i_address_name  = lv_smtp_name
                receiving
                  result          = lo_sender_address.

  • How to change the from name in worflow flow notification to manager

    Hi ,
    I want to change a from_role name in notification message to approval in Internet Expenses workflow.
    Requirements is like this: In Internet expense  a supervisor create a expense report behalf of  his subordinates. when he submit for the manager approval. in the notification of Manager approval it shows the subordinate name in the 'from'  this is the standard.. but i need to display the name of creator that is supervisor name in the from.
    please provide a solution for this,,.. your early response will be highly appreciated..
    Thanks and Regards
    Mohsin

    I am not sure about how to change SERVICE_NAME in PL/SQL Developer (if at all it can be done in that ), but you will have to change the SERVICE_NAME in the TNSNAMES.ORA file.
    1. Locate the entry for PLSExtProc in the file tnsnames.ora at:
    $ORACLE_HOME/network/admin/tnsnames.ora
    2. Change the SERVICE_NAME = ORCL
    3. Save and reconnect
    Aalap Sharma :)

  • How to set FROM ADDRESS for EMAIL activity in Process Flow

    Hi all,
    Can any one tell how to set(which address) FROM ADDRESS for EMAIL activity in Process Flow?
    Thanks,
    Suvvi

    Did you set what OWB guide says:
    To execute a process flow with an email activity, you may need to access different host machines and ports. New security measures implemented in Oracle Database 11g Release 1 restrict access to hosts and ports. You must explicitly grant access to hosts and ports that the email activity accesses using the DBMS_NETWORK_ACL_ADMIN package.
    For example, the user OWBSYS needs to send an email through the mail server mail.example.com using port 25. The DBA must perform the following steps:
    1. Create an Access Control List (ACL) for the user OWBSYS using the following command:
    EXECUTE DBMS_NETWORK_ACL_ADMIN.CREATE_ACL
    (’acl_for_owb_cc.xml’,’ACL for Control Center’,’OWBSYS’,’CONNECT’);
    The ACL has no access control effect unless it is assigned to network target.
    2. Assign the Access Control List (ACL) to a network host, and optionally specify a TCP port range. Use the following command:
    EXECUTE DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (’acl_for_owb_cc.xml’,’mail.example.com’,25)
    3. Commit the changes made using the COMMIT command.

  • How change database from mode MTS (Shared) to mode Dedicated?

    How change database (Oracle 8.1.7) from mode MTS (Shared) to mode Dedicated?

    Did you try it ? Look at this :
    TEST =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = test)
          (SERVER=SHARED)
    SQL> show parameter mts
    NAME                                 TYPE    VALUE
    mts_circuits                         integer 170
    mts_dispatchers                      string  (protocol=tcp)(dispatchers=2)(
                                                 connections=500)
    mts_listener_address                 string
    mts_max_dispatchers                  integer 5
    mts_max_servers                      integer 20
    mts_multiple_listeners               boolean FALSE
    mts_servers                          integer 2
    mts_service                          string  test
    mts_sessions                         integer 165
    SQL> conn scott/tiger@test
    Connected.
    SQL> conn / as sysdba
    Connected.
    SQL> alter system set mts_dispatchers='(protocol=tcp)(dispatchers=0)(connections=0)'
    SQL> /
    System altered.
    SQL> alter system set mts_servers=0;
    System altered.
    SQL> conn scott/tiger@test
    ERROR:
    ORA-12520: TNS:listener could not find available handler for requested type of
    server
    Warning: You are no longer connected to ORACLE.
    SQL>                                                                                                                  However, as I said in my previous posting, you should modify initSID.ora too. If not, next time you'll restart your DB, it will run in shared mode again.

  • Is there a good either discussion or website or something on printing from the iPad? I'd like to figure out how to print from Safari or email (comcast). Thx

    I am having trouble - read can't - print from safari or email off my iPad. I can print from several printer apps I installed, so I know the iPad sees the printer, hp 8500. So how does one print something off safari or xfinity email.

    Read this: http://support.apple.com/kb/ht4356
    The HP 8500 is not one of the supported printers; the HP 8500A is one of the supported printers.

  • How to reply from the same email account?

    I have multiple email accounts. When I receive an email from an alternate account, not the default account, and I respond to this email it is automatically responding from the default account.
    I can change it to an alternate email address as on previous iOS versions- that's not my question.  I just want to be able to reply directly from the account the email was sent to. Am I missing something?
    * kudos to the multiple signatures one for each account, but it doesn't help if I'm responding from the wrong account.

    I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
    The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
    IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
    Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
    Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation.

  • How can I change the from name on my outgoing mail?

    How can I change my name in the "from"  line on my out going mail..I've tried everything?

    What if the Name in Mail preferences, account settings is greyed out?  How/where can I change it?  It is correct in System Prefernces, Mail contacts and calenders and in the iCloud setting in System Prefences.
    The problem is in the mail account preferences!
    Thanks for your help!
    Marcey

  • Why can't I change my "from" name when sending email in iCloud

    I can't change my name as it appears in the 'from" when sending from icloud,
    Thanks,

    if I try to add a calendar it won't let me change the name of it.
    Not sure what you mean. Do you add a new calendar? Then you don't "change" but give it a new name. Or do you want to change an existing one. Then you're back to my first response here, if nothing else.

  • How do i put names in email attachments

    How can i put email address in attachments

    Settings>Mail, contacts, calendars>Contacts>Sort Order. You can use, last name, first name or first name, last name.

  • How changing the song name?

    Is it possible to change the names of the song in itunes?
    The reason I want to do this is not because I am trying claim that the songs are by me. I just wana put "A","B","C"... in front of their names so they can be sorted the way I want

    Click/Select/Highlight the song in iTunes. Then click the song name again. The name should become editable.
    Compared to...
    Also, you can single click on the song, wait a second or two, then single click on the inofrmation you want to change. It is like a delayed double click.
    You worded it better than me. I'm never quite sure how to explain that, but I like "delayed double click."
    btabz

  • How to add organization name in email body

    We are sending an email to the admin when a new organization is created in OIM. We want to include the name of the newly created organization to the body of the email. Is there a way to do this ?

    I would try findOrganizations (http://otndnld.oracle.co.jp/document/products/id_mgmt/idm_904/doc_cd/javadocs/operations/Thor/API/Operations/tcOrganizationOperationsIntf.html#findOrganizations(java.util.Map))
    You should have the org key in the adapter.
    Best regards
    /Martin

  • Change the attachment name in email via webservice

    Hey,
    is there any chance to change die filename of attacheted files (reports) using email scheduling? There is no option in the webinterface. We are using the webservice for scheduling - call the scheduleReport method.
    There is a tag reportDataFileName for the webservice, but shows no reaction. The file ist every time named attachment.XYZ, where XYZ is the template format. We are using an XML Template for creating XLS reports, but reaching an attachment.xml makes it impossible for direct opening out of the email.
    A second problem is the message for the email, attached as message.txt and not directly written in the email.
    thx for any ideas, Sebastian

    Hi Sebastian
    This article might help you, http://blogs.oracle.com/xmlpublisher/2009/12/dynamic_delivery_file_naming.html
    Tim

  • User Exit / BADI to change output from FAX to Email in SRM 5.0

    Hi All,
    I have a requirement to change the Fax output to be changed by Email type and use the fax no as email id for sending the Purchase Order output in SRM 5.0 system.
    Actually here we are not using the FAX server and email is used for faxing things. So I would like to change all the FAX entries to Email and put the email id as <[email protected]> and update the NAST entry.
    Any Clues on this please let me know.
    Thanks in advance.

    Hi,
    i've also tried using the BAdI mentioned to change for some changes required for price during goods movement.
    after discussion with developer, we found out that the when the program reach the BAdI mentioned, it is already too late as the standard program has already populated the accounting document structure to be posted.
    to change the amounts to be posted to the accounting document can be managed with enhancement spots in inlcude program of LRWCLF01.
    but requires heavy logic to restrict to specific scenarios and  intensive testing, not recommended as it is not within the boundaries of standard SAP allowed changes.
    Cheers,
    Joaquin

Maybe you are looking for