How change plant, net price, OPu, and Material Number from ME32K

Hi GURUs,
May let me know how I should configure ME32K in order to allow users to change:
- Material Number
- Net Price
- Order Purchasing Unit
- Plant
I have tried setting up field selections layout properly, even debug PBO, it is still greyed out for those fields.
Please help.
Thanks,
Tony Yuwono

there is no way to change the price in item overview in the contract.
The reason is explained in OSS note 685117.
........The problem is that Scales and/or validity periods may exist for the conditions, because contracts have time dependant conditions, just like info records do.
This is in contrast to e.g. Purchase orders which have Time independant conditions and so, NO scales nor validity periods.
A Purchase order has A price! The price maybe determined based on a source; a contract or an info record. Depending on the order quantity and the date, the PO price is determined.
The contract does not have A date, it might have several; indicated by the validity periods. Furthermore the price is dependant on eventual scales. Therefore it does not have A price either..........

Similar Messages

  • User exit for SO creation while changing the net price for  item

    Hi folks,
    Is there any user exit or BADI to change the net price in the item label of Sales order??
      My req. is that--- i need to change the net price of sales item if the cond type is 'ZUR1 ?
      how can i achive this?
    Regards
    pabi

    Hi
    The user exits and badis for va01 tcode:
                                                                                    Enhancement/ Business Add-in            Description                                                                               
    Enhancement                                                                               
    V45L0001                             
      SD component supplier processing (customer enhancements)       
    V45E0002                               
    Data transfer in procurement elements (PRreq., assembly)       
    V45E0001                               
    Update the purchase order from the sales order                 
    V45A0004                              
    Copy packing proposal                                          
    V45A0003                               
    Collector for customer function modulpool MV45A                
    V45A0002                              
    Predefine sold-to party in sales document                      
    V45A0001                               
    Determine alternative articles for product selection           
    SDTRM001                              
    Reschedule schedule lines without a new ATP check              
    V60F0001                             
      SD Billing plan (customer enhancement) diff. to billing plan   
    V46H0001                               
    SD Customer functions for resource-related billing             
    V45W0001                             
      SD Service Management: Forward Contract Data to Item           
    V45S0004                              
    Effectivity type in sales order                                
    V45S0003                               
    RP-relevance for incomplete configuration                      
    V45S0001                              
    Update sales document from configuration                       
    V45P0001                               
    SD customer function for cross-company code sales                                                                               
    Business Add-in                                                                               
    BADI_SD_SCH_GETWAGFZ                   
    Scheduling Agreement: Read WAGFZ from S073                     
    BADI_SD_V46H0001                       
    SD Customer functions for resource-related billing             
    If it is helpful rewards points
    Regards
    Pratap.M

  • Change active Net price in VA02

    Dear Forum,
    I need to change active net price in va02 for item 10.
    But this is showing grey color and item is active.
    Is there any way to change the price in item 10.
    If poossible pls advice me on urgent.
    Tks & B/R
    Bishnu
    23/03

    Hi,
    You need to check your condition type for which you want to make any changes in sales order.
    Steps:
    1. First go to change mode of condition type for which you want to make any kind of change in the sales order
    . ( V/06 )
    2. now check whether manual changes are allowed or not.
    3. next check mark field "quantity/value " in order to be able to make any changes in sales order.
       because unless this field is not check marked you can't do any change. i.e. it will be gray.
    I am sure it will solve your problem.
    Please Reward if useful.
    Akhilesh

  • Cannot Change the Net price or currecny of a PO

    Hi
    When i go into change mode of a Purchase Order, I cannot change the Net price or currecny, when my collegaue is able to change this, is this a authorisation issues?
    also, were can I see the PO history TAB?
    Edited by: Ian Wong on Jul 4, 2008 4:53 PM

    Hi
    You  must have the following Authorization Objects
    with 02 Change Activity in your role profile
    M_BEST_BSA
    M_BEST_EKG
    M_BEST_EKO
    M_BEST_WRK
    And for PO history tab, its at PO screen item part
    but to be able to see it there must be some logistic movements
    such as GR,IRetc.
    After logistic movements the tab is appearing
    Best Regards

  • How to maintain minimum price limit and maximum price limit for a condition

    Hello Gurus,
    Goodmorning,
    How to set minimum price  limit and maximum price limit for a pricing condition type  where we will do this ?, is it possible to set in VK11 ?
    Note- I   can see  minimum and maximum setting in condition type  pricing - in  SPRO but  not seen anything in VK11 condition record maintaince  . so how to maintain in condition record( VK11-Minimum limit  price and Max limit  price )
    Looking for your inputs 
    Thanks in advance
    Regards
    Venkat

    hi,
    in VK12
    select the condition record - goto blue ladder icon
    there you can maintain scales
    like lower limit and upper limit.
    balajia

  • Replication of Customer and Material master from R/3 to CRM

    Hi
    Recently in our quality server basis administrator has made a client copy from production server after that customer master and material master are not flowing from R/3 to CRM, even sales orders were not getting copied from CRM to R/3 , i went through C71 BB config document and fixed the sales orders updation from CRM to R/3 but not able to resolve the problem of customer master and material master from ECC to CRM.
    I went to B09 BB document and all settings are fine.
    Using R3AS I have loaded following objects DNL_CUST_PROD0, PROD1, PROD3, SPROD , DNL_PLANT. and Material.
    I went to R3AM1 and checked the status as running or wait for each object.
    There are no filters in R3AC1 .
    Queue name withR3AD_MATERIA0000000001 has status SYSFAIL in SMQ2  .
    What can i do to resolve this problem.
    Please advice.
    Thanks,
    Vaishnavi

    Hello Vaishnavi,
    After the client copy , have you run txn:BDLS in order to change the LOGSYS in all relevant tables?
    You can run this txn in test mode as well to see the affected tables.
    Are you getting any dump on these load ?Check it in txn:ST22.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • How to move all the standard and adhoc reports from cube to multi provider

    How to move all the standard and adhoc reports from the basic cube to multi provider?
    i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
    what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
    Thanks in advance sdn experts!

    Hi Les,
    This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
    Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
    After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
    Hope this helps...

  • How do we permanently stop MASS_CRM_* and R3AD_* locks from being applied??

    Good afternoon Experts,
    How do we permanently stop MASS_CRM_* and R3AD_* locks from being applied in CRM? We have several jobs that run weekly to download information from R/3 to CRM. The information only takes a few minutes to download into CRM, however the blocks are applied during the middle of the night, and cause backups within our system.
    Queue name R3AD_SCE also becomes blocked as well during these downloads.
    How do we stop these from being applied, without manually having to go into R/3 to remove during the middle of the night?
    We currently are on CRM 4.0. The only notes that I found regarding this problem was for 3.0 - 3.5.
    Thank you for your help!
    Jami
    Edited by: Jami Shircel on May 27, 2009 8:00 PM

    Thank you very much for your reply.
    We are running a job created to download all materials from R/3 into CRM, using SAP program SMOF_DOWNLOAD with variant of material. I believe the locks are coming on as this is a load. However, the job only takes about 15 seconds to run and take the information from R/3. CRM takes longer to process that information. However, the lock does not come off when the job is complete. We have to manually remove the lock the next time someone from the team logs into CRM. This causes problems as nothing from R/3 to CRM is passing through while the locks are on. As soon as the lock is removed, the systems begin communicating again. The job is not impacted as it takes less than 15 seconds to run.
    How do we either stop the lock from coming on, or have it automatically come off when the job is complete?
    I reviewed the note suggested, but it was for account life cycles. Perhaps the wrong number was written?

  • How do I remove master password and administrator password from my iMac ?

    How do I remove master password and administrator password from my iMac ?

    You can change it or reset it however I don't think you can remove it. Please look over:
    http://support.apple.com/kb/ht1274

  • How to get Storage unit and Warehouse number from Handling Unit.

    hello all,
    I have Handling unit and Material in my program as an input, using these two fields i have to get corresponding storage unit and ware house number, to pick up transfer order.
    Can anybody explain me who can we get Storage Unit and Warehouse Number from Handling Unit.
    I know we can pull transfer order from table LTAK & LTAP using warehouse number.
    But i dont understand how to get warehouse number from handling unit.
    There is table LSUTO which has warehouse and Handling unit relation, but in our system there is not data maintained in that table. So, i was just wondering how can i get warehouse number from the given handling unit number.
    please guide me
    thanks
    Edited by: Mr A on May 12, 2008 1:23 AM

    Hi ,
        Check out the handling unit item table VEPO. You got storage location(LGORT) in it.
    Reward points if it was useful.
    Regards,
    Abhishek

  • I am going to buy a Mac desktop and want to know how to transfer all my purchases and uploaded music from my PC. How can I do this to ensure all videos and music transfer over and not just purchases?

    I am going to buy a Mac desktop and want to know how to transfer all my purchases and uploaded music from my PC. I originally started using iTunes on my PC so it has everything I have ever purchased or uploaded from my own collection of music.
    How can I do this to ensure all videos and music transfer over and not just purchases? Do they do it at the Apple Store or at Best Buy? help!

    Move iTunes Library from PC to MAC
    http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
    Also, See here if you need to...  iTunes to an External Drive
    http://support.apple.com/kb/HT1751

  • How can i download InDesign CS6 and not CC from your website?

    how can i download InDesign CS6 and not CC from your website?

    Are you a cloud subscriber, or are you looking for a perpetual license or trial version?

  • How do I process multiple files and turn them from raw to jpeg

    How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

    Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
    Thanks Vince

  • Question: about to purchase ipad air - how do I migrate contacts,bookmarks,and address books from either an iMac or old macbook?

    Question: about to purchase ipad air - how do I migrate contacts,bookmarks,and address books from either an iMac or old macbook?

    Set up iCloud on both devices
    How to set up iCloud on all your devices
    http://www.apple.com/icloud/setup/

  • How do I select a black and white sketch from a white background and keep the filled in area of the sketch?  I want to copy it to a colored background. I amusing elements 12.

    How do I select a black and white sketch from a white background and keep the filled in area of the sketch?  I want to copy it to a colored background. I am using elements 12.

    oesrowstreasurer
    Please clarify your "Elements 12". Is that as in Photoshop Elements 12 (photo editor) or Premiere Elements 12 (video editor). And, on what computer operating system is the program running?
    Your question is pointing to Photoshop Elements 12 and that you have posted in the wrong forum. If this is a Photoshop Elements 12 question as I believe it is, please post your thread in the Adobe Premiere Elements Forum using the following link provided for your convenience
    https://forums.adobe.com/community/photoshop_elements
    The alternative is to wait for a moderator to see your thread here and move it from here to the Adobe Photoshop Elements Forum..
    We will be watching for a confirmation on what program you are using.
    ATR

Maybe you are looking for