How check table update program, FM etc..

Hi ,
I need to prepare a document for table the KNB5, the table contain 11 fields, need to prepare a document for all the fields how they are updating and what Programs, Fucntion Module, Module Pool/enhancement etc.. involved for table updating .
I will use where used list for each field and get list programs, Fucntion Module, Module Pool/enhancement etc. involved but in what basis, I will confirm weather this program or FM really using table updates or not.
Shall I search with update command or with table? is any other way?
Thanks in advance.
Mahhe

This is kind of tricky. KNB5 is customer dunning data table which (as far as i know) is updated by transaction XD01/XD02.
So, you might want to run a SQL trace and modify/update the data. Then you need to analyze the trace to see how it is being updated. Then again, you need to put break points and see what is going by running the same again.
Just an fYI..... Check out customer master XD02 and company code data - Correspondence tab for dunning info and fields.
good luck

Similar Messages

Check Table updation

Hi Folks,
Problem statement: how to update the values in look up table [imported as a checktable from R/3]. eg. values in of material group
Can an IDOC [sent, from say a prodn r/3 client] update the values ?
Regards,
Vinay

Hi Vinay,
We were in same situation as you. As we extended customer repository there were lot new fields having check tables and extract program is not capable oto dynamically extract those new fields check table entries.
For this, we end up modifying same program to extract additional check table entries and as well modified XSD for import manager to import new set of entries.
Also we scheduled this program to run every night as batch process and MDM import manager picks file and process into MDM lookup table if there are any new entries .
This is working fine for me.........
Thanks
Reddi

How do you update programs in Adobe Creative Cloud?

I understand that the following applications are now available:
Lightroom 5.4
Adobe Raw 8.4
Premiere Pro 7.22
However, if I go to any application and to to /Windows/Updates, I get the message: “Your applications are all up-to-date as checked less than a minute ago.”
Similarly, if I go to Creative Cloud Manager it lists all applications as “up-to-date”.
My installed programs are currently all earlier versions:
·         Lightroom Version: 5.3
·         Adobe Photoshop CC Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
·         Adobe Raw Version 8.3.0.141
·         Adobe Premiere Pro CC Version 7.2.1
I have tried:
1. Going to \Program Files (x86)\Common Files\Adobe and renaming OOBE to OOBE_old followed by downloading the latest version of Adobe Application Manager. This did not result in finding any new updates.
2. Changing my browser from Chrome to both Internet Explorer (11.0.9600.1.17041) and then Firefox (28.0) and repeating 1 with no effect.
3. Deleting Lightroom and reinstalling it. This worked and I now have Lightroom 5.4 installed.
4. Deleting Photoshop and Bridge and reinstalling them. The original versions were installed rather than the latest version with Raw 8.4.
5. Downloaded Adobe Raw 8.4 from (http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected) and tried to launch but get the message: Adobe Application Manager ‘Update Failed -Updates could not be applied -This patch is not applicable for you. -Please check for updates from the Help menu in your product to see a list of latest updates available.-If the problems persist contact customer support for further assistance."
I am running Windows 7 64-bit Version: 6.1 Service Pack 1
If I go to the Customer Support Chat Line, I am told that I need to be transferred to a “Product Person”. Last time after patiently waiting 45 minutes I gave up.
Any suggestions as to my next steps?

Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
Anyway thanks again

RE Table Update program with tcode ..

Hi
friends i had done a update program for HR module pa0267 and using ldb
but when i run this program in se38 the it workks fine ..but if i run this program trough tcoe i get the selection screen and when i run it it throws me out not even on se38 .
regards

hai
i think u hav the problem of T-CODE parameter.... so u go the se38 and then go to Display object list(CtrlShiftF5)... then delete the T-CODE and creat again new t code abd try again.... after that go to se 93 and checked ur program coz some time ur program should be error... of any wrong program plz put the correct program and save then run the tcode... I think i wil be wk now....
regard
nawa.

How can I update programs that were purchased for me?

I received a laptop that was preloaded with Final Cut Pro and Motion. I have updated the OS to 10.9.1 and when I try to install upates for FCP and Motion I get the Apple ID for the person who installed the original programs and no way to change it to my ID. Is there an easy way to transfer them to my ID so I can continue with the updates?
Thanks,
Paul

There's no way at all except to delete them and then buy them from your Apple ID.
(97379)

HT4623 I have an iphone 3, there is no software update in any settings menu, how do I update to ios4 etc??

I am having a problem downloading, I receive a message saying I need to upgrade to ios 4 or later, however when I tap the update it says all apps are up to date. there is no software update tab in general settings.......please help.

you need to connect it to a computer and update via iTunes. http://www.techrepublic.com/blog/mac/how-to-upgrade-to-ios-4/573. Also, iOS 4.2.1 is the max for an iPhone 3.

New ABAP Program to check Direct UPDATE in Database Table

Hi all,
As per customer requirement , I have to develop ONE Program which find out that in which ABAP Program , Programmer has used Open Sql command like UPDATE , DELETE , INSERT , MODIFY to direct update in Database Table.
Have a look on all Z-ABAPs, find out if there are statements with "update", "delete", "insert" or "modify" in the coding, then find out if updates to sap-Tables are done
How can I achived that ?
Please , If anybody is having idea , than please let me know..
Thanks You ,

Hi
Kindly refer to the below link. This has step by step how you can achieve the checks.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/12659a90-0201-0010-c18b-9d014f9bed0d]
But if you want to check if any program they have used 'UPDATE' then you can do like below.
Go to SE38
Utilities---> Find in Source Code-
Find --- UPDATE
In program - Z* or ZX* if you want to search only in Exits
Regards,
Vijay V .

How to check how many tables used in one particular program

Hi Gurus,
I am wondering how to check for how many tables are used for one particular program whether its a custom (Y* or Z* program) or
a sap program (R*) .I have tried ST05 .But its not satisfactory .Could u help me plz in this regard .
Thanks in Advance !!!!!!!!

hi,
Go with the transaction se80
select type as the Progarm
in the below block provide your program name.....
there u can find the drop down of your object related tables, types, fields, etc.....go with the tables u can find the respective information of the tables....
or
go with the se30
and enter the program name...
and go with the trips and tricks....
u can find the drop down of the
abap objects performanceexamples....
and go with the required thing.....
then u can find the required....
Cheers,
Brahma

I have the first iPad, and it keeps crashing no matter what program(safari) app (iTunes) or game I use. I check the updates regularly and I'm up to date. Why does it keep crashing and how can I fix it?

I have the first iPad (which is considered ancient). I'll open safari and no matter what I'm searching after a few minutes it crashes (it will close safari and bring me back to the main app screen). The last few days I've been searching song on iTunes, and I have the same issue. It closes my iTunes and brings me to the main app screen.
I have checked my updates and everything is current for this iPad. It's a 64gb iPad with 54gb of available space so I know it's not a storage issue.
Does anyone have some pointers on how to keep it from crashing all the time?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

To create bapi?(function module for bapi i.e. checks and update table)

Hi all,
I want to know how to create BAPI?. means in function module how i hv to put checks and how i will update database table.
thanks and regards
sg

BAPI STEP BY STEP PROCEDURE: -
http://www.sap-img.com/abap/bapi-step-by-step-guidance.htm
BAPI Programming guide: -
http://help.sap.com/saphelp_nw04/helpdata/en/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
BAPI user guide: -
http://help.sap.com/saphelp_46c/helpdata/en/7e/5e115e4a1611d1894c0000e829fbbd/frameset.htm
Example:-
http://www.erpgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm

How to check for updates on SCM packages?

Hey guys,
I wondered for some time now how to check for updates on SCM packages, i.e. -git
or -svn ones. Updates for binary packages are automatically updated by pacman,
no problem there. Checking for updates on non-SCM packages from the AUR is
easily done with one of the various helper tools available (personally, I use
slurpy).
However, SCM packages can change without their PKGBUILD changing, so I'm not
notified that I should recompile and update them.
Is there a "proper" way of doing this? Am I missing something?
Thanks in advance!

If your system is booting then u can say that your bootblks are installed.Usually BootBlks are present in 0 & 1 slice of UFS Filesystem
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
An x86 FDISK partition for the Solaris software begins with a one-cylinder boot slice, which contains the partition boot program (pboot) in the first sector, the standard Solaris disk label and volume table of contents (VTOC) in the second and third sectors, and the bootblk program in the fourth and subsequent sectors. When the FDISK partition for the Solaris software is the active partition, the master boot program (mboot) reads the partition boot program in the first sector into memory and jumps to it. It in turn reads the bootblk program into memory and jumps to it. Regardless of the type of the active partition, if the drive contains multiple FDISK partitions, the user is given the opportunity to reboot another partition.

Updating database table via program

Hi,
I am updating a DB table (Sap standard table) via my program.
I have few doubts with regard to same. They are given below,
1. I came to know that it is not best practise to update the sap standard table via program using "update" statement. Why so? Is there any other way or statement in doing the same?
2. The sap standard table which i update via my program is BDRGIN. Now my question is, when my program is modifying the values of the table, if some other user also modifies the value at the same time via SE16 then conflict occurs. How to resolve it? Is SAP uses any automatic handling for such conflicts?
kindly help me out.
Regards,
Raghavendraprasad.N

Hi,
Its not a good practise to modify the Standards tables through programs, because most of the standard tables will be interdependant with forign key relation ships (check table relations). So incase we create an irrelavant entry, then it will cause a lot of confusions.
For example we create entries in MARA/MAKT table using MM01/02 transactions.
There are a few standard tables like TVSA (containing customising data), these have to be maintained through the SPRO transaction. You can open SPRO transaction and search for the node to maintain entries in it or you can go to the transaction SM30 and you can give the table name and click on customizng to go the SPRO node.
Still if you are trying to create entries in your table, Enque/Lock the table do the updations and then Deque/Unlock the table, so that there will be no conflicts happening during that time.
Regards,
S.Dakshna Nagaratnam.

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

HT204152 I am unable to update my App store Updations. the reason being billing problem asking to update payment method.many times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc.

I am unable to update my App store Updations. the reason being billing problem asking to update payment method.Many a times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc....Using ! phone 6plus .IOS8.3

What do you mean by 'refusing from the system', if you are getting an error message then what does it say ?
For a credit card to have a chance of being accepted it needs to be registered to the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are. If it is and if you are getting a 'declined' message then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes Support (these are user-to-user forums) and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If when trying to download you are getting a message about a 'problem with a previous purchase' then that implies that iTunes wasn't able to collect the money for your last purchase. If that is the case then you won't be able to download anything else (including app updates) until you've paid off what you owe : Pay an unpaid balance in the iTunes Store - Apple Support
If you aren't getting the 'problem with a previous purchase' message then try logging into your account (not when trying to download something) and see if you get the 'none' option so that you can remove the card's details and be able to download updates to your apps : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support

How to dynamically update the Table?

Hi All,
Hope somebody will help me out ot resolve my issue.
In my application, about 10 analog channels data coming in. Out of which two parameter needs to get updated dynamically on the table. (For each Rpm between 500-1000, in steps of 50, have to capture Pressure points & show it on the table.)
I seen there is one method called table method available which helps to set the value of a particular cell specified by corresponding row and column index.
I tried this. In row 0, col 0 & col 1 it put what value I specified by using that table method. when it goes to row 1, col 0 & col 1 also got updated but vanishing the above put row 0, col 0 & col 1 values. so at any point of time, I am able to see only the current row values.
Hope there should be some dynamic refreshing method available or else I dont know how to handle this situation. Pls. clarify.
Thanks,
Kousy

Hi,
Thanks.
But I am not able to update dynamically.
I just done slight changes to your update.vi. Just run Update_1.vi and after update
button is pressed, change the row, col index to see the update. please note
it is not able to update if matrix exceeds 3x4. i.e set row index=3
col index=0; new cell value = 10. it is not updating.. it might because of initialization
of 3x4 matrix values at the start.. ot the way I am trying out is bad?
By using Table method itself I got the solution what I want. I have attached that vi too.
just check out and reply if any flaw..
Thanks,
Kousy
Attachments:
update_1.vi ‏94 KB
Table Update.vi ‏96 KB

How check table update program, FM etc..

Similar Messages

Maybe you are looking for