How clean the memory

How can clean the memory on my ipad?

Settings>General>Reset>Erase all content and settings.
Warning: All data will be gone.

Similar Messages

  • How to free up or clean the memory in a WebForm?

    Hi everybody!
    I need you help. I'm working with web forms with data base connections. In the first moment, I can see the memory  state by Task Manager and the memory is loaded in 1.50 GB. After of run the project, the application start to eat the memory and then
    this is overloaded to 2.80 GB. This is irrational and no way find the solution for that. I destroyed all the objects and the connections, also I used  the Garbage Collector but doesn't matter because no works. Regards and thanks so much for the comprension.

    Hi,
    For ASP.NET question, please post your thread in
    ASP.NET Forum.
    Best Wishes!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to &quot;Mark as Answer&quot; the responses that resolved your issue. It is a common way to recognize those who have helped you, and
    makes it easier for other visitors to find the resolution later.

  • My macbook air has no longer free memory. Now, when i turn it on, all i can see is a blue landskape and can`t see de dock anymore. how can i clean the memory and get free space?

    hi, my macbook air has no longer free memory space. I haven`t done anything since it started to comunicate me that. now when i turn it on all i can see is de apple on the top left corner and the rest of the monitor is blue. how can i get some memory space since i can`t even onpen the finder?/

    Choose Preferences from the Finder menu, click on the General tab, and uncheck the box to open folders in a new tab.
    (117195)

  • How to clean the memory after calling BitmapData.draw() ?

    If you add the embedded image on the Stage 800x600 flash player will spend 17Mb RAM / 14Mb Virtual
    But if you create 1200 sprites (in every 100 circles), call draw (), remove the sprites and force to call Garbage Collector, flash player will spend much more - 36Mb RAM / 33Mb Virtual
    var container:Sprite = new Sprite();
    // adding 1200 sprites
    var shiftX:Number = 10;
    var shiftY:Number = 10;
    for (var i:int = 0; i < 1200; i++) {
         var circle:Sprite = new Sprite();
         // drawing 100 circles
         for (var j:int = 0; j < 100; j++) {
              circle.graphics.beginFill(0xFFFFFF/j*i);
              circle.graphics.drawCircle(0, 0, 10-j*.1);                        
         circle.x = shiftX;
         circle.y = shiftY;
         shiftX += 20;
         if ( shiftX >= stage.stageWidth ) {
              shiftX = 10;
              shiftY += 20;
         container.addChild(circle);
    // draw() and adding bitmap
    var bmd:BitmapData = new BitmapData(800, 600, true, 0x00FFFFFF);
    bmd.draw(container);
    var bmp:Bitmap = new Bitmap(bmd, "auto", true);
    addChild(bmp);
    // removing sprites
    while (container.numChildren) container.removeChild(container.getChildAt(0));
    // Force Garbage Collector 1
    System.gc();
    System.gc();
    // Force Garbage Collector 2
    try {
         new LocalConnection().connect('foo');
         new LocalConnection().connect('foo');
    } catch (e:Error) {}
    What happens to memory?

    Is there any issue with JavaFX? or I have to do something else?It's likely an issue with your application code (though it could be a bug in the JavaFX platform too).
    Either way debugging most memory issues in JavaFX (except for ones the graphics card texture related) is the same as debugging them in Java - so just use standard Java profiling tools to try to track down any memory leaks you have.
    Such work is as much an art as a science and takes some experience to get right, so grab your detective cap, download and use the tools linked and try and track it down:
    http://stackoverflow.com/questions/6470651/creating-a-memory-leak-with-java
    http://resources.ej-technologies.com/jprofiler/help/doc/indexRedirect.html?http&&&resources.ej-technologies.com/jprofiler/help/doc/helptopics/memory/memoryLeak.html
    http://www.ej-technologies.com/products/jprofiler/overview.html (recommended tool).
    http://visualvm.java.net/
    http://netbeans.org/kb/articles/nb-profiler-uncoveringleaks_pt1.html
    http://www.ibm.com/developerworks/library/j-leaks/ (this link is really old and somewhat outdated but explains some of the underlying concepts better than some newer articles I found).

  • "Cleaning" the memory of an old iBook

    I upgraded to a MacBook and don't need my old iBook anymore (yes I am sure I have all the files off of it). As I either want to sell it or donate it I want to clear off the personal files. What is the best way to do this? I don't really want to undo the operating system -- but I guess I could just reinstall it?
    Help!

    Click here and follow the instructions in the relevant article.
    (37583)

  • How Can i clean my memory and make my imac more faster ?

    I am new user in mac i have imac 4 g ram  and need a way to clean the memory and make my imac more faster ...

    You can't "clean" RAM. If the "storage" space on your hard drive isn't enough then put in a larger hard drive or delete any of your data you no longer need or can store on an external drive. Beyond this I cannot say because you have not provided enough information such as the amount of installed RAM, Capacity of your hard drive and the amount of available space on the hard drive, the specific iMac model you have.
    You can try reinstalling Lion:
    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
    However, if your computer doesn't have enough RAM or your hard drive is full, then reinstalling won't help.

  • Cleaning oracle memory

    Hi,
    I am doing analysis of query running with union all and without union all i.e union.
    So i want clean the memory after the first run so that the execution plan and result will be in oracle memory.
    Command for clearing the memory and runing to see the execution time

    I agree with Toon.
    Why do you want to "clear the memory"? That is not needed. Measure the workload of each method and use that to determine which has the lowest workload. Messing with memory and measuring elapsed time are flawed.
    You can clear Oracle's buffer cache in order to make both queries use physical I/O.. but what about the file system cache? The data can be cached there.. Therefore one query can be lucky and its Oracle physical I/O is in fact logical I/O from the file system cache, whereas the other query's physical I/Os as seen by Oracle are indeed physical.
    Measurement and benchmarking using elapsed time is dangerous.. as it is a complex issue that needs one to understand all aspects and moving parts involved. You cannot merely tinker with Oracle's "memory" and expect that to create a level playing field for comparing and benchmarking queries.

  • Where did the memory space g

    I have a Zen Micro 5gb that is a little over a year old. It says it is supposed to hold 2500 songs, yet mine says it is full at 200. How can the memory be less than half of what it should be? Can anyone help me fix this annoying problem? Thank you!

    That's the problem with mp3 player song amount listings. They pretty much always use the worst quality bit rate possible for examples. I only have 40 or so on my 6gb, and it's already half full. It also depends on the time. I think they usually use 3 minutes per song to calculate it. Unfortunately, it sounds like you'll need a new player. I want to sell my micro and get something with video and a bigger capacity, and right now, the place where I can get the most money is amazon.com.

  • How do you clean the entire memory and start over

    how do you clean off the memory in order to start over

    Why are you asking on the Apple forums?

  • How can I zero out the memory on my macbook air?

    I have an 11 inch mid 2011 macbook air and cannot figure out how to erase the memory so that none of the data is recoverable. I booted from the recovery HD but when I went to the erase section of the menu, the security options button and the zero out empty space option were both greyed out. How can I clean off my Mac?

    You can't, and don't need to, zero an SSD in Disk Utility. Once you've erased it the data is unrecoverable.

  • Hi, i have a macbook air, but i want to upgrade to the new model. I want to sell my existing air, but can i wipe the memory clean of all existing content to sell it, but still update my new pc when it arrives?

    Hi, i have an Air but want to upgrade to the new model. How do i wipe the memory clean of my existing Air so i can sell it, and ensure when i get my new PC it automatically assumes the existing settings? Any help appreciated...

    First of all, as a rule you should have two backups before you do anything else. (most don't, and it's up to you).
    I would have one backup done as a Time Machine backup on an external disk, which you will use to import all settings, data and apps to your new MBA via Setup Assistant on your very first boot of the new machine.
    Second, I would have prepared, a bootable backup done via Carbon Copy Cloner or Super Duper on a second external disk. This you can use for unforseen problems that might be evident on the Time Machine backup (hey it happens).
    After you have these two items in preparation, then use the original system disk or flash drive to reformat and reinstall the original operating system to the old machine, cleanly. After that, it is ready for sale. If the unit is not an SSD equipped MBA, you can perform a secure wiping of the disk when you perform the reformatting.
    To reiterate.... You need a good Time Machine Backup as a source for you setting up the new Mac with Setup Assistant.

  • Anytime I try to open FF I get this error message The instruction at "0x7b2377a9" referenced memory at "0x7b2377a9". The memory could not be "written". How do I fix this?

    When I try to open FireFox. I get this error message: The instruction at "0x7b2377a9" referenced memory at "0x7b2377a9". The memory could not be "written". I don't get this message when I open Internet Explorer. How do I fix this? I like FireFox a lot more.
    == This happened ==
    Every time Firefox opened
    == About 5 days ago ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

    The solution is easy.
    Install "Malwarebytes' Anti-Malware" free edition and use it. This program found malware in your pc. After that clean this malware. Finally instal Firefox again and enyoy it because this installation is correct and clean. Regards.

  • How Can I Clean Memory, Cache...An​d Boost Memory On Playbook (like clean & boost memory on Blackberry phone)?

    Dear bros, I have a question which I concern about: How Can I Clean Memory, Cache...And Boost Memory On Playbook (like clean & boost memory on Blackberry phone)? I want to to this because I want my playbook run smoothly.
    Thanks all.

    The PlayBook manages memory through the OS, there's no 'memory cleaner' like on the BlackBerry phones.
    In the browser, there are settings to clear cache, cookies and history which do improve the browser performance.
    You may want to try and change the PlayBook multitasking mode. Go into Settings - General and change 'Application Behaviour'. Showcase is full multitasking (slower), Paused pauses all programs when minimised and makes the PlayBook save battery and run a little faster.
    Hope that helps.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!

  • How do i clean the air vents on my hp pavilion dv6 notebook pc?

    Latelly, the fan on my HP Pavilion dv6 Notebook PC has been noiser than usual and it appears that my notebook becomes quite warm to the touch. The HP Support Assistant running on my notebook PC recommended that I can reduce the heat and fan noise  by cleaning the air vents. How do I do this? Can I do this myself or do I have to have a professional do it?

    Hi Rosie,
    You can clean the vents on your notebook.
    Buy a can of compressed air.  Essentially, you need to gently blow out the vents with the compressed air to clear out the dirt and dust.  You need a can with a small straw like attachment for the nozzle so you can point it directly toward the vents.
    Do take a look at this document first so you know which way to point the air and how to avoid damaging the fan inside the notebook.
    Reducing Heat and Fan Noise by Cleaning Air Vents
    Extra information:
    Fan Runs Constantly, the PC Notebook Operates Slower than Expected and Generates Heat
    Good Luck!
                When you see a great Post and you appreciate the help…
           Please Click the Kudos Star on the Left to say "Thank You"!
             Fixed? Click this Post “Accept as Solution” so others can find it.
     Remember:  The more information you provide, the better help you can receive.
    Always Include:  (Notebook) Product Number , Printers – Model Number ,
                       Operating System and an Error Description
                         Never give out your Serial Number
                            2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • How do you prevent the organizer from mixing the order of pictures when down loading off the memory card?

    @How do you prevent the organizer from mixing the order of pictures when down loading off the memory card?

    This sounds like you are using Photoshop Elements, and the Photoshop Elements forum would be best at answering that.
    Photoshop Elements
    Gene

Maybe you are looking for

  • How do I find and use AUNetSend or better way

    Scenario: My main computer (G5 PPC 10.5.8) is in my basement studio. I run Logic Pro 8.0.2 and Pro Tools 8.0.1cs2 on it (DIGI 002 interface). My secondary computer (G4 PPC 10.5.8) is in one floor up in my dining room. Not much on it, really. I could

  • Reading attributes of different context nodes

    Hello, I want to read attributes of BP_DATA/TaxNumberList Node: BUILHEADER from Node BUILTAXNUMBER. I have tried all without success. In GENIL Browser they are not related. What can i do? Best Regards JM

  • Can All Calendars Stay Bolded

    I'm new to iCal and have inputted all my events, and notice that only the events from one of my colored calendar sections can be highlighted (brighter, bolder colors) at one time (i.e. when I highlight a different colored event in my daily and weekly

  • How to resize a PDF document in simplicity ?

    Hi, I have an HP OfficeJet Pro 8500 printer.  When I scan a document an import it in PDF, the size of the document is very large.  Since the beginning, I used Apple's Color Sync utility to reduce the size of file without really reducing the quality o

  • Problems exporting lingo sound

    Hi I am trying to export a director movie, but have used lingo to control my sound files. I have managed to export the images to quicktime but can't get the sound to work. is there anyway of doing this? or do I have to recreate all my sound on the tw