HOW CLOSE CAN BEHRINGER TRUTH B2031A SPEAKERS BE TO A 2013 IMAC WITH FUSION DRIVE?

How close can you put studio speakers (specifically Behringer truth b2031a) to a 2013 imac?  I know the speakers are sheilded but is it still safe right next to the computer?  Will the fusion drive inside or a external be affected by the speakers?  Anyone who has knowledge or experience in this topic your information would be greatly appreciated.  Thanks!

This was a concern expressed in this thread: Worrying reply to Apples FAQ on new Fusion Drive
However, Apple has since amended the FAQ, clarifying their earlier Fusion confusion.
Therefore I believe the answer is yes, you can add an external USB HD. If Apple would only state that explicitly in this document, it would eliminate all doubt.

Similar Messages

  • AP proximity? (How close can your AP be to someone else's AP).

    Tried doing some searches but cannot find anything...
    If you are designing a WiFi system in a building that already has a system (independent to your new system), how much separation between APs should you have? ie. How close can/should you put your AP to an existing AP?
    Sometimes because of the building layout you want to go at the same spot, but I know you need some separation. Assume omni, 100mW APs.
    Thanks.

    You have some valid points. But every-man-and-his-dog has a 2.4 AP and it still works then it will most likely still work even if it's "every-man-and-his-dog +1".
    Most importantly the system has to be designed correctly regardless of the existing networks. The better your system is designed to work solo, the better it will perform in an environment with other APs. Yes existing networks will obviously degrade your performance, but you can't really find anywhere in an modern urban environment without seeing a dozen APs from either inside and/or outside your building. The existing network could be dense but if it is not used all that much, the degradation should not be extreme.
    Besides, you have say 100 users in the building, they can use system A (existing) or B (my new one). If they have the option of using both/either, then you have 50 on A and 50 on B. Is that much/any worse than having 100 on A? Contention is contention though the extra beacons will add to it. For the users that can only use "B", then they will at least have an option, even though it will be at a slower performance than if A did not exist, at least they have an wireless option now. If "A" did not exist, you could build your "B" network, and 1 week later, someone could build "A" anyway.
    1) Don't worry, it's not my money. Most of the existing "high density" areas are low usage private wlans. (P.S. What's the definition of "high density"?).
    2) RFID is not part of our application.
    3) & 5) This is being accounted for in our designs.
    4) If we use Cisco, then I hope it's significant. ;-)
    6) Gigabit.
    Good discussions.

  • I accidentally downloaded Mavericks OS and now I can't sync my calendars and contacts on my iMac with my iPhone, how can I resolve this?

    I have accidentally downloaded Mavericks OS and now I can't sync my calendar and contacts on my iMac with my iPhone.
    I don't use iCloud (Don't like it) so I need to resolve this - how?
    Robert

    Robert_E15 wrote:
    I have accidentally downloaded Mavericks OS
    Robert
    You cannot accidentally download Mavericks. You have to select to download it. You can always erase your drive and reinstall from the backup you made before you installed Mavericks.
    14. How do I restore my entire system?
    Pete

  • How to add a SSD to 2010 iMac with 1tb drive

    How to add a SSD to 2010 iMac with 1tb drive? I have a mid-2010 iMac with 1tb HD and would like to either replace the HD with SSD -or- add 256 or 400gb SSD to maybe the Optical Drive and use it as the boot drive. Is this possible with Model 11,2? i thought i\I'd read it was, but recently am reading my system is too old - OWC have SSD drives for newer models not Model 11,1 -or- 11,2

    Any SATA SSD will work, whatever you are reading is incorrect.
    You have 2 choices with this model-install the SSD in place of the HDD or the Superdrive.
    If you are installing in place of Superdrive you will need some form of SSD Caddy-these can be found on the cheap at places like eBay, also OWC sell one called the DataDoubler.
    Guide:https://www.ifixit.com/Guide/Installing+iMac+Intel+21.5-Inch+EMC+2389+Dual+Hard+ Drive/8643
    If installing in place of old HDD you will notice that the propietary Temperature Sensor will not fit on the new drive, you will need to replace this with a sensor such as this or this
    You will also need a 3.5inch to 2.5inch drive adaptor such as this
    Guide: https://www.ifixit.com/Guide/iMac+Intel+21.5-Inch+EMC+2389+Hard+Drive+Replacemen t/6284
    If you still have doubts contact OWC as mentioned above, I would start deciding whether your Superdive is needed or if you want to swap out the HDD.
    Hope this points you in the right direction

  • Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  Any ideas?

    Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  I tried excluding different parts of the software from the back-up but it didn't make any difference.  I even tried exluding "invisible items" to no avail.  Any ideas?

    When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
    Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
    Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
    A full back-up on the iMac would be about 650 GB.  The partial updates that I have been trying start out at 115MB and keep growing indefinitely.  The original back-up never finished nor have any of the follow-up attempts.
    The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
    See A10 here.
    Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

  • I can't download the latest security update to my iMac with Yosemite 10.10.1

    I can't download the latest security update to my iMac with Yosemite 10.10.1

    Hi mesuno.  I can't download the update either.  When I click on "Update" I see the download progress bar for only a fraction of a second.  Then I get a message in the "updates installed" area saying that the update has been installed.  Then the Security Update notice returns and so does the "Update" button.  Then I press "Update" again and the same thing happens.  I can do this ad infinitum.
    The system seems to be confused.  I have several entries in the "installed" area saying that it has been installed, but still the "Update" button persists.  When I check with "Sytem information" there is no record of the installation.
    Is there something wrong with the App Store app, or does anyone else have a better idea?

  • How I can to download sold-to-party and ship-to-party with the relationship

    Hello,
    I want to know how I can to download sold-to-party and ship-to-party through Middleware form R/3 to CRM and kept the relationships just as be defined in R/3
    When I downloaded a sold-to-party or a ship-to-party to CRM, they created in CRM as BPs without the relationships.
    How can I do this?
    Thanks and Kind regards,
    Ohad

    Hi,
    I downloaded "BUPA_REL" object, only the Contact Persons was downloaded,
    But is not relation ship to party with sold to party.
    So it's not solve my problem,
    Please help me.
    Thanks and Best regards,
    Ohad

  • How I can copy text from website or ms word to photoshop with its style?

    How I can paste the multicolor text to photoshop? Let say that half of text is green and other half is blue

    I see no default way to do that.
    A work-around might be creating pdfs and placing those as Smart Objects.

  • Can you attach an external HD to the new iMac with a fusion drive?

    I'm trying to decide how to configure the new iMac I am going to buy. Can you attach an external HD to an iMac with a fusion drive?  I'm assuming it would be fine, but since the fusion drive is new, I don't want a nasty surprise.   Some of the new Mac Minis now have fusion drives, so has anyone added an external drive to it?

    This was a concern expressed in this thread: Worrying reply to Apples FAQ on new Fusion Drive
    However, Apple has since amended the FAQ, clarifying their earlier Fusion confusion.
    Therefore I believe the answer is yes, you can add an external USB HD. If Apple would only state that explicitly in this document, it would eliminate all doubt.

  • How do I download/install Photoshop & Premiere Elements 10 on new iMac with no disc drive?

    My iMac hard drive recently failed and I lost everything. I just bought one of the new iMacs with no disc drive.  I had purchased Photoshop CS5 in 2011 but it came with CD's for install.  I stil have them but it doesn't do me any good since there is no disc drive to put them in on the new computer. How can I install Photoshop using my serial number from my original purchase?  I downloaded the CS6 trial version and when I try to activate it with my old serial number it says it is invalid.  

    There are links to trial installers on pages:
    http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
    Very carefully read and follow the instructions on the pages!
    Download and install the trials, launch and activate them with your serial number then do 'Help > Updates'.

  • HT3805 How do I restore Vault created under Snow leopard to new IMac with Maverick 10.9.2

    Purchased a new IMac with OS 10.9.2
    trying to restore an Aperture Vault (created by snow leopard) I get error message that Vault could not be restored because it was created by older OS.
    Is there a fix for this or do I kiss my 4k pics goodbye - I hope this isn't the case.

    Purchased a new IMac with OS 10.9.2
    trying to restore an Aperture Vault (created by snow leopard) I get error message that Vault could not be restored because it was created by older OS.
    What exactly is the error message? The operating system version should not matter, when restoring from a vault. What however will matter, are the version of Aperture and the file system of the disk with the vault.  Is your vault on an external drive? If yes, how is the drive formatted?  If the vault is not on a drive formatted MacOS Extended (Journaled), move it to a disk with the correct formatting and try again.
    And what version of Aperture created your vault? With SnowLeopard you probably used an older Aperture version. Then your vault needs to be upgraded to a newer Aperture version, before you can restore from it. Do you still have a version of Aperture installed, that is the same version as your vault? Was it an Aperture 3 version?
    If your vault is an Aperture 3 vault, try to open it as an Aperture library instead of restoring it.
    - a quick and dirty emergency measure: Try to open your vault directly on the drive where it is now without restoring it. Make a backup copy of your vault, before you try it.
    Change the filename extension of your vault to ".aplibrary", this will turn the vault into an Aperture library and try to open it directly in Aperture by double clicking it.
    Aperture will now try to open the vault as the current Aperture library and upgrade it.
    “Aperture Vault” was created by an older version of Aperture, and cannot be restored by this version.

  • New iMac can't find OSX when firewired to G3 flatscreen iMac with 10.3.9

    I just purchased a new iMac with Leopard, and I have an old flatscreen g3 imac running 10.3.9. I started up the new computer, plugged in the firewire cable, held t on th old comp, the symbol popped up, but then the new computer says It can't work w/out osx, and that osx isn't installed on the old mac, even though it is... I need to firewire sync.. how?

    No no... I fixed it now. I was trying to get the old data from the old comp to the new one... It worked on the fifth try.

  • I installed windows 7 with bootcamp, also the support software with the drivers. Everything works fine, but my usb hubs don't work on windows. Can Anybody help me?I´m using an iMac with OSX.

    I Installed windows with bootcamp on my imac, with the support software(drivers,etc).
    Windows works perfectly appart from the usb hubs.
    Can anyone help me?

    Hello,
    Are these the built in hubs, or external ones?
    If external, are they bus powered or do they have their own AC power?

  • Can I mirror my ipad mini to my new imac with Yosemite (or Mavericks?)

    Hello!
    I would like to mirror what is on my ipad mini to my new imac with Mavericks 10.9.5 or Yosemite. (In about this Mac, it says 10.9.5, so I guess my question would apply to either Mavericks or Yosemite, since I can update if needed.)
    I have seen old posts about this, saying that you must use additional 3rd party software.
    Is this still the case, or have things changed with new macs and Mavericks 10.9.5 or Yosemite?
    Is there a way to use Apple TV to do this? or Is Apple TV only for HDTVs?
    Thanks!

    Thank you, Demo! I had no idea that was possible. Looks like that would be the answer, except.....
    I did some additional research just now, and it looks like it was a blessing to me that my new imac didn't come with Yosemite, like advertised, because forums say my Adobe CS3 won't work with Yosemite.
    Looks like it would be cheaper for me to get a 3rd party app to do the mirroring, rather than paying monthly for Adobe cc.
    Unless someone else knows of another solution that would work with Mavericks instead?
    Thanks again!!!

  • How reformating Imac 27' Fusion Drive

    Hello Mac Comunity,
    I need to reformat the hard disk drive IMac Fusion
    Is there a special procedure to be followed or I can do like other Mac?
    Thanking you in advance for your help,
    best regards,
    Francois
    Bonjour,
    J'ai besoin de reformater le disque dur de IMac Fusion drive
    Est-ce qu'il y a une procédure particulière à respecter ou je peux le faire comme sur les autres Mac ?
    En vous remerciant d'avance pour votre aide,
    Cordialement,
    Francois

    Welcome to Apple Support Communities
    Both have got problems with Windows on Boot Camp, so it doesn't mind which one you have. Note that 3 TB hard disks support came with OS X 10.8.3, so there may be problems with it.
    To avoid problems, I recommend you to install Windows on a virtual machine using Parallels, VMware Fusion or VirtualBox. However, it's not good for things like graphic performance, and it doesn't use all the hardware of your computer. To be honest, it's better to choose a 1 or 2 TB hard drive, so you can be sure that Windows will work correctly

Maybe you are looking for