How come Flex Builder does not complain when semi-colons are omitted for AS3 statements?
Hi, I was wondering why my flexbuilder3 plugin for eclipse does not complain when and if I leave off a semi-colon at the end of an AS3 statement. Has anybody else experience this in their flex environments?
What can I do to fix this; as this is very annoying.
Thanks in advance!
Tonté
Hm... I see. Thank you all for your replies. I didn't realize AS3 does not require semi-colons at the end of AS3 statement unless there is more than one statement on the line. I will have to double check this for my self and report back. I guess I can't shake my Java habbits.
Thanks again!
Happy Flexing!
Tonté
Similar Messages
-
Interface Builder does not open when I click Mainwindow.xib file on Monotouch.
I did a lot research about it, What the most of view say it is because of the iOS SDK, not because of the MonoTouch, they say that iOS SDK provides the Interface Builder? Any suggestions? Thanks in advance. iOS SDK Version 4.3.
Does Monotouch work within Xcode? I'm not sure what it is. If so then Interface Builder does not open a separate window in Xcode 4. When you first go to your .xib, you must select your "Window" to see the window. Otherwise you get an empty grid. Here's an image with the "Window" selected. I have it set for Mac applications not iOS but what you have should look similar.
-
HT4972 How come my iPad does not have software update in the settings?
Help, my iPad does not have software update available in settings, how do I update?
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972 -
How come Apple Store does not sell 6 Core or 12 Core Mac Pro?
It was around March they had Apple Mac Pro 12 Core for sale but now they don't how come?
I tried looking on other websites and they said it's discontinued.
I tried eBay they have a few new ones for sale.Just "Select" one of the new black cylinder models. Then you get a new screen that allows you to specify "features". One feature is 12 cores.
The cost of that Mac is nearly double the cost of a 4 core. Are you sure you are doing enough Ray Tracing or Compressor or similar work to keep that many cores busy?
For about the same money as the 12-core, you could have two complete four-core models.
For only US$500 more than the four core, you could have a 6-core, a nice balance between practical everyday capability and some modest ability to stretch into the heavy rendering work. -
Latest AdobeReader not working properly with 8.1 IOS...Adobe icon does not show on saved PDF's and printing from PDFs takes forever. I uninstalled and reinstalled latest Reader
zoer1,
Adobe icon does not show on saved PDF's
Would you provide more details about the problem? A screenshot would be helpful.
The following FAQ document describes the steps to add a screenshot to your forum message.
How to add a screenshot to a forum message from iPad/iPhone
Regarding printing PDF documents...It depends on the PDF document that you are trying to print. In general, it will take longer to print more complex and larger PDF documents.
If you are willing to share your PDF document (that takes forever to print) with us at [email protected], we can test it with the same version (11.6.3) of Adobe Reader on different iOS versions (iOS 7.x vs. iOS 8.x). Please include the link to this forum (https://forums.adobe.com/thread/1616231) in your email message for reference.
Actual printing is handled by iOS (not by Adobe Reader) via AirPrint over Wi-Fi connection. We've heard from other users about iOS 8 Wi-Fi connectivity problems.
You may also want to search for similar issues on Apple Support Communities. -
Does not play correct ringtones that are set for the Caller and Rings when no one is calling
I have had my Droid Global for around and three months and from the beginning I have had issues with the ringtones ringing when a certain person calls me. Instead, it seems, it will play the rigntone that is applied to the last person that called me instead of the person who is actually calling me. This can be somewhat frustrating and kind of defeats the purpose of applying rigntones to people in the first place.
Also, just recently my phone has decided to ring all by itself...without any incoming calls, notifications...nothing. It does a very quiet ring that sounds similar to that of a house telephone or landline phone. It does not stop unless someone calls me or if I take my battery out and reset my whole phone. My phone has only done this twice and unfortunately it once happened in one of my college classes and I couldn't get it to stop.
Please help me...I don't know what I can do to fix this!!!Hi Cargo23,
I am sorry to hear you're having issues with your phone not ringing. In what zip code were you located when this issue occurred? Are you using your vehicle's bluetooth when this happens? Please try a soft reset to refresh your connections http://vz.to/1nLXk5g.
Thank you!
EdW_VZW
Follow us on twitter @VZWSupport -
Excel opens and does not close when using the OI classes for some users...
Hello Experts,
I am using the OI classes(i_oi_container_control, i_oi_error, i_oi_document_proxy, i_oi_spreadsheet) to transfer Excel data to my itab. The problem we are encountering is that for some users the excel automatically opens and does not close. But in my case it is not opening so it is fine in my case. In my code I am already using the 'CLOSE_DOCUMENT' and 'RELEASE_DOCUMENT'.Viraylab,
Check by any case you set the parameter register_on_close_event of the method init_control? Dont set the parameter as it will look for the corressponding custom code in your program. Also try with the method release_all_documents.
Regards,
Kiran Bobbala -
How come my pc does not recognize iphone 5 when i plug in
error message: Itune cannot connect to my iphone5 because pairing is missing? Please help
Hey there maureen168!
I have an article here that can help you troubleshoot this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
How come CS4 Bridge does not offer Photoshop batch operations?
I have had tons of problems with CS4 on my desktop PC but seem to have most of them resolved with a new video card and updated driver except this one. If it matters I'm running Windows XP service pack 3, 4gb of RAM of which 3.4 is available. It has an 2.67 GHz Intel Core2Duo cpu.
While in Bridge, under the "tools" menu, there no longer appears an option for batch operations such as I had with CS3. In CS3 it was the bottom option of all those listed. The only batch operation offered in CS4 is batch rename. I want to run Photoshop actions on multiple images selected in Bridge but cannot since this option is not being offered.
I have deleted preferences and rebuilt them several times, and uninstalled and reinstalled Photoshop itself so many times that the CD is almost worn out. I have also upgraded CS4 to the latest upgrade on the Adobe site, 11.0.1.
I've done everything I can find to do but still not fixed. Anybody out there know the answer? This has not been a smooth transition and is very frustrating.
ThanksOK, let's see how good you REALLY are...here's a new one. Well actually not
a new one, but it went away for so long I thought all the other things I've
done corrected it (CS4 update and video driver update). It's back with a
vengeance.
The brush tool stops working for no apparent reason. If I shut down
Photoshop and restart, it works. As long as I'm working on an image, it
works. Sometimes it will continue to work for several images. Other times
it will not work on the very next image opened. Earlier today it worked
fine for multiple images until I printed some, then stopped. I thought it
had something to do with printing so I shut down, restarted and worked
without making any prints. Again worked OK for a while and then stopped.
This is true for all brush type tools...paintbrush, clone, healing, etc. It
seemed like if I opened files directly from Photoshop instead of via bridge
that I had more success but now this evening it will only allow me to work
on a single image. If I close an image and open a new one, no brush
function no matter how I open it. This is just the way it acted up before
but then went dormant as I noted above.
There is no pattern or repeatability to it that can help me home in. By
that I mean, tomorrow it may indeed work fine for hours and then go wacky
again or it may go wacky on the first image. I thought it may have been a
RAM or some other cumulative type problem but this is shot down by the fact
that it will at times stop working immediately while other times work for a
long time.
I'm at the point where the only thing I can think of is it must be the
computer. I installed CS4 on an old clunky laptop and it works fine. I
installed the 30 day free version on this e-mail computer just as a test and
again it worked fine. On my super duper photo editing PC, it just won't go.
I didn't realize that I'd have to add the cost of a new computer into the
cost of upgrading to CS4 because the computer is not that old and definitely
not a clunker as noted in my original post. I'm already out about $200 for
two new video cards and still no luck.
Any ideas?
JR -
How come my icloud does not have family sharing?
I am attempting to turn on family sharing except neither my laptop nor ipad have the "family sharing" choice in settings or in my programs. How do I add this so that I can go through the steps to family share?
Hi kathymaas33,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you want to start a family group. I would recommend that you read this article, it may be able to help the issue.
Start or join a family group using Family Sharing - Apple Support
Set up Family Sharing
Use these steps in iOS 8:
Go to Settings > iCloud.
Tap Set Up Family Sharing, then tap Get Started.
Confirm that you want to be the family organizer and that you're signed in with your personal Apple ID.
Follow the onscreen instructions.
Use these steps in OS X Yosemite:
Choose Apple menu > System Preferences, then click iCloud.
Click Set Up Family.
Follow the onscreen instructions.
After you set up Family Sharing, you can invite your family members to join.
Cheers,
Mario -
How come my iMac does not start?
I have followed all the bootcamp procedures. I created a USB disk accordingly with Windows 8 and it went through the process of installing Windows where I had to enter the code etc. Everything seemed to be going well until I needed to restart the computer. It now posts that there is no existing bootable disk.
Reset the SMC: http://support.apple.com/kb/HT3964
Reset the PRAM: http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
Restart the computer while holding down your mouse button which if you hold it down long enough (5 minutes at most) should eject the disk
If the disk still doesn't come out at that point then you need hardware evaluation;
contact Apple, contact an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store. -
I have an iPhone 5, iPhone 5s, MacBook Air and recently bought an iPad Air. Since I synced my iPad, my iCal on my Macbook no longer updates and every time I open it, this window appears even if I didn't change or forget my password. So I tried changing my password and still this window appears. I hope someone can help me. Thanks!
As if by magic it is now working. I went away from the mac for a couple of hours, came back and it started to work. This is scary as I would expect this kind of action on a Mickysoft machine but not a Mac. Ho Hum - at least the problem has been sorted even if I don't know how.
Chris -
Tint2 does not appear when multiple monitors are enabled
So I have this weird problem I can't seem to fix. Tint2 works perfectly absolutely perfectly when I have a single monitor enabled. However I have a second monitor which is tilted in portrait mode, so my main monitor has a resolution of 1920x1080 and the other 900x1400 (since its in portrait mode). When I disable the portrait monitor tint2 is fine, but when I turn it on in Nvidia X server settings tint2 disappears! But its still there since I can click to where the bar should be and I can see my windows coming into focus and others out of focus. I have a GTX 660 with nvidia driver package installed. I know this is a really weird problem. Hopefully one of you have had experience with this, thanks.
jedijimi wrote:Have you tried the 'tint2conf'??
Hmmm that didn't work either. This the output of me starting tint2 in terminal. And my tint2rc and tint2confrc as well.
tint2 &
real transparency on... depth: 32
xRandr: Found crtc's: 4
xRandr: Linking output HDMI-0 with crtc 0
xRandr: Linking output DVI-D-0 with crtc 1
tint2 : nb monitor 3, nb monitor used 3, nb desktop 4
icon with depth: 32
tint2 : not icon_swallow
icon with depth: 32
tint2 : not icon_swallow
icon with depth: 32
tint2 : not icon_swallow
icon with depth: 32
tint2 : not icon_swallow
//file tint2rc
# Tint2 config file by Kexolino
# Background definitions
# ID 1
rounded = 0
border_width = 1
background_color = #2D2D2D 100
border_color = #484848 100
# ID 2
rounded = 0
border_width = 0
background_color = #D64937 100
border_color = #000000 100
# Panel
panel_monitor = all
panel_position = bottom center horizontal
panel_size = 100% 31
panel_margin = -2 -1
panel_padding = 0 0 10
panel_dock = 0
wm_menu = 1
panel_layer = normal
panel_background_id = 1
# Panel Autohide
autohide = 0
autohide_show_timeout = 0.2
autohide_hide_timeout = 1
autohide_height = 0
strut_policy = follow_size
# Taskbar
taskbar_mode = multi_desktop
taskbar_padding = 0 0 10
taskbar_background_id = 0
taskbar_active_background_id = 0
# Tasks
urgent_nb_of_blink = 20
task_icon = 1
task_text = 1
task_centered = 0
task_maximum_size = 200 32
task_padding = 10 4
task_background_id = 0
task_active_background_id = 2
task_urgent_background_id = 0
task_iconified_background_id = 0
# Task Icons
task_icon_asb = 100 0 0
task_active_icon_asb = 100 0 0
task_urgent_icon_asb = 100 0 0
task_iconified_icon_asb = 100 0 0
# Fonts
task_font = Droid Sans 9
task_font_color = #dcdcdc 100
task_active_font_color = #FFFFFF 100
task_urgent_font_color = #FFFFFF 100
task_iconified_font_color = #dcdcdc 80
font_shadow = 0
# System Tray
systray = 1
systray_padding = 0 6 15
systray_sort = left2right
systray_background_id = 0
systray_icon_size = 16
systray_icon_asb = 100 0 0
# Clock
time1_format = %H:%M
time1_font = Droid Sans 9
clock_font_color = #FFFFFF 100
clock_tooltip =
clock_padding = 10 6
clock_background_id = 2
clock_lclick_command = gsimplecal
time1_timezone =
time2_timezone =
clock_tooltip_timezone =
# Tooltips
tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.0
tooltip_hide_timeout = 0.0
tooltip_background_id = 2
tooltip_font = Droid Sans 9
tooltip_font_color = #FFFFFF 100
# Mouse
mouse_middle = none
mouse_right = close
mouse_scroll_up = toggle
mouse_scroll_down = iconify
# Battery
battery = 0
battery_low_status = 20
battery_low_cmd = notify-send "battery low"
battery_hide = 96
bat1_font = Liberation Mono 8
bat2_font = Liberation Mono 8
battery_font_color = #B5B5B5 100
battery_padding = 2 0
battery_background_id = 0
# End of config
//tint2confrc
# TINT2CONF CONFIG FILE
default_theme = /home/ansm/.config/tint2/tint2rc
cmd_property = python2 /usr/bin/tintwizard.py
width = 500
height = 350 -
I cannot open firefox. it starts to load, but never complets.
When I open Belarc it uses firefox and works fine. When I go to my mail I get the error message I posted in troubleshootongMake sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong -
Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support
Maybe you are looking for
-
0...unbounded RFC only called once
Hi All I have a 0...unbounced RFC. In the MM I duplicated the subtree, Now if a field is = to 1,4,9,10,12 it need to call the rfc and then for 4 and 9 agian. Now what happens is when I use 1 header and one detail line with the field = to 4 or 9 it ca
-
Hi. I have a Windows 7 x64 pc with Adobe CS6 installed. We've had recurring issues with Illustrator crashes that seem to be unable to resolved so I am always checking for available updates in the hopes Adobe will fix. This morning I checked for updat
-
Hi, I need to identify from a give material code that where all it has been used in BOM as component. Is there any function module which I can directly use to get this information. I need material no., Alt BOM, and Plant as output. I know it can be a
-
Why won't one of my speakers work on my iphone 4?
why won't one of my speakers work on my iphone 4?
-
Please help wth a 'changeip' error
Hey We have just recently been turfed out of our office and relocated to different building. Our IT dept has informed us we need to change our servers IP address as they now need that for something else. I have done as much research as I can and look