How come I can't hear Siri talking anymore,what I do wrong?

Try a reset. Reset the iPhone by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.

Similar Messages

How come i can't hear the voice i add to pictures of my movie?

I hear the firsts i made, i hear the movie parts, but the last i add only appears(the little purple screen). I hear them if i separate it from the pictures. Sorry for my english!

I tried and got the same results you report.
The only way I was able to extend a pdf past 1 second was the following (admittedly rather awkward) workaround: control-click the pdf in the browser, open in Timeline, Retime. By "slowing down" to 10% I was able to then add it to a project and extend its duration.
An easier way is probably to open the pdf in Preview, save as PNG and use that.

How come I can't access Wi-fi anymore?

I have no data plan but I use to could go to star bucks and use wifi. But recently for some reason it says I am connected to the hot spot but I can't use the the internet at all and it's really bugging me so I am hoping someone could really help me out. Please and Thank You!

Hi
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
Have you changed the Browser Configuration? Browser > Menu > Options > Browser Configuration > Hotspot
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

How come I can't see other computers anymore?

I used to be able to see other computers in my area, in the finder window, now I can't anymore. On any of my Apple computers.

BobHarris wrote:
Does clicking on the oval in the upper right corner change anything?
That just makes the window smaller, removes the right and top panels
Have you enabled/played with the System Preferences -> Security -> Firewall?
I didn't touch it, it's the same settings as it was before.
Are the other computers in your home? Are they neighbors? Office co-workers?
I have two other computers in my home, and they used to be listed, now they're not. Also when I take my Macbook Pro to school, I use to get a list of about 15 other computers in one of my classes, now I get none listed.
How are these other computers connected? Wifi (make/model of base station), Ethernet (switch, hub, router), over the Internet (cable, DSL, ...)?
All Wi-Fi

How come i can hear my friend on ichat but she cant hear me?

how come i can hear my friend on ichat but she cant hear me?

Hi,
Several possibles.
1) The Mic (or Audio) item in the Video Menu is Off (unticked)
2) The Selection in App (iChat or Messages) menu > Preferences > Video section > Microphone Drop down is not pointing to a Mic that is active.
3) The Mic selection in System Preferences > Sound > Input tab is not the same device in the app and/or the volume is not set high enough.
In System Preferences > Sound > Input tab the blue response bar must get to at least halfway (preferably 3/4s) but not bang in to the right hand end.
The Mic should be the one select in the app itself.
IF you are using a headset then change both the System Preferences > Sound > Input to anything else but the headset mic.
Then do the same if the app.
Then go back to the System Preferences and "Set" that "First" and then do the App "Second"
Repeat the same process for the output options in both places.
8:17 PM Saturday; July 6, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Everytime I try to use my phone a square comes round the app and Siri talks to me so I can't use my phone. What can I do ?

Everytime I try to use my phone a square comes round the app and Siri talks to me so I can't use my phone. What can I do ?

Go to Settings > General > Accessibility > Voice Over > and switch it off.
To tap, you'll need to double-tap. To scroll, use three fingers and drag.

How come you can't put a Tab in a Cluster?

Hello,
How come you can't put a Tab Control in a Cluster?
It looks like users have been asking this question
for years, and all the way back to LV versions 6.1.
Someday, please, pretty please, NI.
Please. Maybe by version 9.5 of LV?
Kevin.

Ben wrote: This idea just weirds me out!
Kevin: Sorry Ben, but think how I must feel.
Ben wrote: I understand the cosmetic and GUI interaction part of it OK. Its the "how would it code?" part that send my head spinning.
Kevin: We don't need to worry about that. We'll let the NI LABview guiruis worry about that. They know how to program for TABs and they know how to program for Clustors. Now they just need to put them together.
Ben wrote: Would the tab control be available via bundle by name and unbundle?
Kevin: Yes. It would simply return the value indicating which page is selected.
Ben wrote: If the cluster was an indicator and the tab value was "page1" would the user be able to select page2?
Kevin: Of course, the block diagram would simply pass the enum indicating which page to display.
Ben wrote: On the block diagram, would there be a relationship between the tab and the elements on each tab?
Kevin: None. Or no more so than the relationship of any element on a panel or front panel.
Ben wrote: On the FP the tab control has a "pages" property and from those we can get an array of refs to the controls on the pages. Would we still be able to that within a cluster.
Kevin: Yes. No Differrence.
Ben wrote: Aside from the above Q's I would guess that the tab in a cluster would only allow greater abuse of clusters i.e. "Super Clusters".
Kevin: It is not my intent to abuse any Super Cluster in any way shape or from. In contrast, would help to spread out some clutter from ones front pannels and move the clutter into tabs within a cluster. The beauty of it would be that it would come automatic, and handled by labview.
Ben wrote: There was also until recently, limitations on the size of the type descriptors. Very complex FP's and large clusters would be hit by the problem that the type descriptor need more than the 16 bit allocated.
Kevin: I would never suggest even coming close to putting more that 65535 items in a cluser in any fashion.
Ben wrote: I do not pretend to know why NI did or did not allow this. In the end I can only share my guess and hope somone who does know will post.
Kevin: Yes, somebody from NI might know something about why we can't put a Tab in a Cluster.
Ben wrote:
Related story:
I had often been mystified by "Why I could not create a waveform datatype block diagram constant?". While at NI Week and talking to Jeff Kodosky I asked him (thinking that I would get a good under-the-hood explanation of the data type used blah, blah, blah... He said "I'm not sure. It ws probably an over-sight." I noticed that in LV 8, you can now create a waveform data type constant.
Ben
Kevin:
Maybe it was an oversite. Maybe we can have Tabs in Clusters in 64bit Lab View 9.
Kevin's Disclaimer: The variation in case usage, while referring to LabVIEW, should not be construed as disrespect, nor should it be interpreted as an indication of Kevin's LabVIEW programming skill or experience or knowlege.

I can't hear people talking on my iPhone

I can't hear people talking on my iPhone, however they can hear me. My speaker phone works and with that i can hear the caller. just as well, i have no problem by using the headset. any solutions? i have recovered the system into the newest version.

On going issue for many over a month now since the phone came out. Nothing fixes it and many have returned the phone for another in hopes of getting a good one...
No audio when calling or receiving a call
     https://discussions.apple.com/thread/3404857?start=0&tstart=0
     https://discussions.apple.com/thread/3048845?start=0&tstart=0
     https://discussions.apple.com/message/16797945#16797945

After updating to iOS 7.0.6 (iPhone5s), I can't hear Siri.

After updating to iOS 7.0.6 (iPhone5s), I can't hear Siri. She works fine, however there is no sound feedback. Please help, I don't know what to do. I tried hard reset, system restore and everything, nothing helps!

Hello makedonce
Try the update for iOS to update it to 7.1 and see if that resolves the issue. If it does not resolve the issue, then check out the last article to troubleshoot the issue further.
iOS 7.1
http://support.apple.com/kb/DL1732
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Regards,
-Norm G.

How come I can't add a song to my playlists in itunes match? Is it me or itunes match? It keeps on coming up with a message " iCloud playlists can only contain songs from your iCloud music library. If you continue, the playlist will be removed from iCloud

How come I can't add a song to my playlists in itunes match? Is it me or itunes match? It keeps on coming up with a message " iCloud playlists can only contain songs from your iCloud music library. If you continue, the playlist will be removed from iCloud and will only be available on this computer"?
You must surely be able to add and subtract songs on specific playlist?

I fixed this issue (with help from tech support) and it involved several things.
After adding a song to iTunes, right-click on the song in iTunes and select "Update iTunes Match."
OR go to the iTunes menu-->Store-->Update iTunes Match.
Maybe that's the reason, it just hadn't updated to the cloud.
OR maybe it's not a high-enough bitrate file. This happens to me because most of my tunes are home-recorded.
Sometimes converting to .mp3 or Create AAC version might work. (You do this with a right-click in iTunes, and then you will want to remove the original file from iTunes.)
There is an iTunes Preferences setting, under General Preferences called Import Settings. Try setting it to AAC Encoder and iTunes Plus. That (I think) causes imports to be slightly better quality.
Good luck! The tech support person at Apple is requesting that a knowlege-base article be written about this.

How come I can't update my iPad 1 to the new iOS 6 it says my iOS version 5.1.1 is the latest version?

How come I can't update my iPad 1 to the new iOS 6 it says my iOS version 5.1.1 is the latest version?

The iPad 1, coming up on three years since it was introduced, has been given two major and a number of minor upgrades to iOS, more than many tablet manufactures provide. The iPad 1's hardware just can't effectively support many of the features in iOS 6. So I don't think that it's particularly unfair for Apple to no longer provide updates. And yes, I do own and manage a number of iPad 1s.
Regards.

How come I can't use the back gesture in certain apps with my magic mouse on certain applications in Lion OS?

How come I can't use the back gesture with my magic mouse on certain applications in Lion? I figured out that in Safari i have to use a 1 finger swipe to go back a page instead of 2 fingers like i used to do in Snow Leopard. But apps like iTunes and iPhoto and i can't do that. Any ideas? is there a setting im missing to make this work? It works in Safari but not any other applications, so im assuming theres no setting for this. Just want to know if this is just a bug that will be fixed in the next update or if its something I can fix now. Any help would be appreciated because its kind of annoying. Other than this minor issue I love Lion. Full screen apps are unbelievable.

Hi.
I managed to compile open-vm-tools and the kernel module against 3.14.5 kernel. Here is the tarball with the all the files.
I still have an issue : With vmware-player 6.0.2, I can't acces my shared folder :
root@P146S011b ~ # lsmod | grep hgfs
vmhgfs 41622 0
vmw_vmci 47960 2 vmw_vsock_vmci_transport,vmhgfs
root@P146S011b ~ # vmware-hgfsclient
R
D
C
root@P146S011b ~ # mount -t vmhgfs .host:/R /mnt
Could not add entry to mtab, continuing
root@P146S011b ~ # tail -1 /etc/mtab
.host:/R /mnt vmhgfs rw,relatime 0 0
root@P146S011b ~ # cd /mnt
cd:cd:6: not a directory: /mnt
1 root@P146S011b ~ #
Forgot to add an install file with a depmod -a inside. You will have to run it by yourself

How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

Because you can only synce with one iTunes library and you are switching libries by using the new computer. To nake this yyour syncing computer:
- Move all the media(apps, music, synced video and photos etc) to the new computer.
- Connect the iPofd yo the computer and bake a backup fo the iPod by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
Note that the backup that iTunes makes doe not include media.
To move mdia to the new computer see:
iTunes: How to move your music to a new computer
iTunes Store: Transferring purchases from your iOS device or iPod to a computer

HT2404 I just clicked on Software Updates; BUT nothing shows what's happening? How come I can't see the updates & time it will take?

Help! I just got this Lion, and SO many changes & not necessarily for the better !
I went to the Apple icon, but "Software Updates" did not show ... though I had deferred installing some updates ...
Finally it showed up, I clicked on it, saw the updates to do - BUT when I clicked on install - the "box" that usually shows the updates & how long to install - just disappeared! I can't get to it to see what's next. (I have to leave soon & will turn off the mac)
What's happening? How come I can't see the updates as they are installed, & how much time it will take?
How do I know IF they have been installed? Is this the "new Normal" for Lion? Or is there a glitch in my mac somewhere?
How about updates you download from Apple (not bought) - they go to Downloads on the Sideboard, but are they installed automatically, & put where they belong too? Is there no more restart, etc.?
- I just went to Systems Preference, to see the "Installed Software" - shows they were ... but don't I have to restart anymore? Are all updates now automatically placed where they belong?
Thanks to any who can help
PS One other question - just checked my "profile" & it has my email addy that's 4 years old... how do I change That?

software update not working
https://discussions.apple.com/thread/3967755?start=0&tstart=0

HT4718 How come I can't download anything from mac app store?

How come I can't download anything from mac app store?
I've tried everything it all started when my apple app store icon in the doc disappeared.
It will not go to the Mac App Store
I have a MacBook Pro 2010 intel
os mac mountain lion 10.8.6 however I do not have the original copy that was downloaded from the app store when I bought it.
I NEED TO DO A CLEAN INSTALL TO GET MY APP STORE ICON BACK
Please if anyone can help apple doesn't seem to care?

If you need to reinstall Mac OS X 10.8.x (there is no 10.8.6 yet, by the way), restart your Mac, hold down the Option key so you see all the bootable partitons, and boot to the Recovery Partition. From there you can reinstall Mountain Lion. You will need a good Internet connection.
For more details, see:
http://support.apple.com/kb/HT4718
Regards.

How come I can't hear Siri talking anymore,what I do wrong?

Similar Messages

Maybe you are looking for