How come I do not get the same signal in LabView??
Basically, I want to reproduce a force curve on Nanoscope program into Labview, since labview has faster aquisition rate.
Anyways, since there are two voltage signals, I wanted to plot XY graph of them. However, I get a wierd signal that is not quite close to what I am supposed to get.
I am thinking about maybe there are some noise problem, or there is a little delay in getting the two signals (ex, the two signal is not in sync)
If anyone has similar experience or tried to the same experiment, please let me know. It would be really helpful.
Thanks.
Attachments:
ScreenShot048.gif 3 KB
ScreenShot016.gif 53 KB
Hi,
I just wanted to filter the y signal. Tried using smooth filtering, but didn't work well. Now, I am trying the Lowpass with 30Hz cutoff frequency; however, when I run my VI, it give me this error message
"Analysis: The following conditions must be met: 0 < f_low <= f_high <= fs/2."
If I can get better signal for y axis, I might get a better graph, as you said.
Thanks and if you know what that error is for and what to do to make it run, please let me know.
Mike.
Attachments:
ScreenShot002.gif 26 KB
ScreenShot004.gif 25 KB
ScreenShot005.gif 43 KB
Similar Messages
-
AFTER BURNING MY 400000 CD INTO ITUNES, AND PUTTING THEM ON MY 5 IPODS AND 1 IPHONE I GO TO GET ARTWORK WHICH IS FREE AND A GREAT APPLE BONUS BUT........itunes get artwork how come led zeppelin 1 is the same COVER as led zeppelin 4? OR 5? WHICH IS WRONG do you not have led zeppelin 1 cover? APPLE I PUT ALL MY ALBUMS CDS ON APPLE TV MACBOOK AIR AND ALL MY 12 OTHER APPLE DEVICES.
I ONLY WANT TO KNOW WHY APPLE STORE ITUNES DOES NOT HAVE LED ZEPPELIN ONE COVER ??????THIS IS A USER HELPING USER FORUM YOU ARE NOT ADDRESSING APPLE HERE AS THEY DONT READ OR WRITE HERE SHOULD YOU WISH TO CONTACT APPLE USE THE FEEDBACK!!!!
http://www.apple.com/feedback/
SHOULD YOU WISH TO CHANGE ALBUM COVER YOU RIGHT CLICK ON A SONG AND CHOOSE INFO AND ARTWORK AND SET THE IMAGE TO WHAT YOU LIKE!!!!! -
HT1338 cd got stuck and not getting the same under finder . How to eject it?
cd got stuck and not getting the same under finder . How to eject it?
Restart, holding down the mouse.
-
TS1398 how come i can not get wi-fi on my ipod touch
How come i can not get wi-fi on my ipod touch
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
How come I'm not getting IOS 6.2 on my ipod touch 4
How come i'm not getting IOS 6.2 on my ipod touch 4
1. Because there is not 6.2 (there is a 6.0.2)
2. 6.0.2 is only form specific hardware, such as the iPhone 5. It is not needed for the 4th Generation iPod Touch. -
There were some updates on my Apps. I updated them on my iTunes but my iPad did not get the same downloads/updates thru iCloud. Does the iCloud only works for "New" Apps or Books downloaded from the store but not the "Updates"?
Purchased music does not count against your iCloud storage and you cannot get rid of them in the purchased tab.
What is backed up
You get unlimited free storage for:
Purchased music, movies, TV shows, apps, and books
Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
Look here for help on managing iCloud storage.
http://support.apple.com/kb/HT4847 -
How come itunes does not get all album arts works reply asap thanks
like for
kayne west- graduation album
it doesnt download the album artwork for it
but for others it gets it
i mean the album is already in itunes store
whats going on
can you link me the contact page for itunes storeiTunes will connect to Apple's servers to get the album art. As for iTunes not getting the art for all your albums, I don't know why this happens. Usually this happens if the albums are not on the iTunes store - but your case seems to be different.
Here's what I do: If you really want your cover art, you can use Google's image search to manually download it. In iTunes' grid view, right-click on the album in question, click "Get Info" and then say "Yes". In the Info tab, double click on the white box under "Artwork" (in the lower right corner) and manually navigate over to your artwork file. Select it, press open or double click, then click OK. Since you selected the whole album, iTunes will embed the artwork into all the files on your album. The next time you sync, it will also appear on your device(s).
Have a good time getting your artwork! Hope this helps
Edit: There may be times when iTunes will not edit your files after you click OK. This may be a problem with the permissions of the folder where your files are located. Let me know if this happens.
Message was edited by: TheLegendaryDreamer -
I just get a page that says congratulations mozilla you have the newest download.
I can't drag anything anywhere as I am not on the right HOME page
nothing like the one that you show in the demos.
Am I doing something wrong?Oh... one other thing. The orange Firefox button is for the compact two-column menu. To get that, you need to turn off the classic menu bar. This article has the steps: [[Display the Firefox button menu instead of the menu toolbar]].
-
Hi JDev gang
A question came up from a client the other day, is how come ADFUtils and JSFUtils that appear in many of the Oracle JDev demos aren't included in the base JDev release? They seem like such obvious things to include in a base ADF Faces/RC project and for Oracle to expand upon, yet we currently have to "steal" the code for our own projects and include them.
What are others' thoughts on this? Do you find these 2 classes indispensable for ADF Faces/RC development?
Cheers,
CM.Ah, the ugly can of Java annotation worms. Sure you want to open it? ;)
Personally I'd love to see annotations introduced to masively reduce the complexity of Java JSF beans, and also the Java ADF BC side.
One of the bits I see students really struggle with when teaching JDev is the unnecessary exposed Java methods in the ADF BC classes, such as the EntityImpl getAttrInvokeAccessor, setAttrInvokeAccessor, createPrimaryKey. Beginner non Java students really can only think about objects like POJOs, they struggle when they see lots of framework code added. As such hiding the detail using annotations should in theory make this eaiser.
Regards the backing beans and injecting the binding container, iterator etc. I note between JDev 10.1.3 when it first came out, we were injecting bindings via the faces-config.xml file. This worked badly because new users struggled with getting the config file entries exactly to match the backing bean properties and accessor names.
Then ADFUtils + JSFUtils came along which meant no injection was required, but now people are struggling with what to cast the result to (using something like JSFUtils.resolveExpression). As they don't inherently know the binding classes, what to cast to becomes a problem. The IDE doesn't help with this at all either.
As such with the annotation approach, this would be better as the annotation would take care of returning the correct binding classes. This would take us to the next level. Also as the IDE would inherently know which binding class, then users would be better off in understanding the binding layer classes and which methods to call thanks to the code completion facilities. Of course it means someway of associating a backing bean with a particular page such that the BB knows which binding container to get, which iterators to include etc, and if the binding names are changed in the page def, the BB would automatically change its names (I figure you'd have to do this for beginners, otherwise they'd get confused).
However, I think there is still a need for ADFUtils and JSFUtils even with annotations because there will be times where you want to do something that isn't provided by the annotations.
Cheers,
CM. -
How come I can not see the volume bar on my music
I do not always see the volume bar on my iPhone music, how can I get the volume bar to display on the bottom of the music screen?
tap on the screen?
-
How come there r 3 of the same albums on my ipod
so i have 3 of the same albums in my ipod each identical and i saw no problem w/the documents or files in itunes wut is wrong?
Press command + option + esc keys together at the same time.
Wait.
When Force Quit window appears, select the application if not already.
Press Force Quit button at the bottom of the window.
Wait.
Application will quit.
If this does not help, press the power button for 7 or more seconds.
Computer will shut down.
Restart.
http://support.apple.com/kb/HT3411 -
How come I don't get the whoosh when I send an email?
After I installed Mavericks I don't get the whoosh when I send an email. If I restart I'll have it until the machine goes to sleep and then it'll disappear agian.
Note: None is not an option in all Countries and/or Regions.
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
How come I do not get 4g service at my house?
Hello,
I am just wondering why I do not get 4g service at my house. This has been years long that I have not received 4g coverage at my house and I am able to receive the coverage about 5 miles away (near the mall). My zip code is 11767. What steps do I take to address this issue? I am getting a new phone through Verizon in which I just signed a new 2 year contract and I would like this problem alleviated immediately.
Sincerely,
RobertI only have the issue with reception in my home. I have 4g service out in the parking out of my apartment. I have 4g service when I'm at school half of the time. The reception is awful in my apartment and I only have 4g service in my bedroom and no other rooms at all.
Candice M. Morson
J.D. Candidate 2015
Charlotte School of Law
Criminal Advocacy Certificate Program
Phi Alpha Delta -
How come Safari will not open the dashboard widgets?
I need some help I was trying to open some dashboard widgets I kept getting a error message from Safari. Stating that this page was not able to open? Any help would be greatly appreciated!! Please any suggestion
Could be the com.apple.Safari.plisy file in ~/Library/Preferences/. Try removing that first. If no change, move ~/Library/Safari/ to your desktop. If no change, try creating/logging into a test user account.
-
How come I can not change the initialization parameter
show parameters audit_trail
NAME TYPE VALUE
audit_trail string NONE
alter system set audit_trail = true
ERROR at line 1:
ORA-02095: specified initialization parameter cannot be modified
I am using windows XP professional, Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
sqlplus sheet
How to change the parameter like this?
Edited by: user8117130 on May 4, 2009 9:23 AMuser8117130 wrote:
show parameters audit_trail
NAME TYPE VALUE
audit_trail string NONE
alter system set audit_trail = true
ERROR at line 1:
ORA-02095: specified initialization parameter cannot be modified
I am using windows XP professional, Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
sqlplus sheet
How to change the parameter like this?
Edited by: user8117130 on May 4, 2009 9:23 AMHi,
This is a static parameter which means you can't change it when the db is running. If you are using an spfile, you need to change the query as ,
alter system set audit_trail=true scope=spfileAnd then give a bounce to your db. If you are usnig a parameter file, than change in that and restart.
http://download.oracle.com/docs/cd/B10501_01/server.920/a96536/ch112.htm#REFRN10006
HTH
Aman....
Maybe you are looking for
-
VB Script not working correctly the first attempt
I have a VB script that loads the active channels data into a Report. The weird thing is that upon first run (pressing F5) of the script it does not update my Graph Data on either page of my 3 page Report (1st page has a table and the 2/3 pages have
-
I have to move gear around a bit and am thinking of using WiFi instead of the cable. It is difficult to keep all my cable. Is there any report/experience showing the 5B suffering as the 5A did.
-
Leave Cancellation Approval is not triggered
Hi Frnds, The leave cancellation workflow which is configured in IMG is not triggered for leave request with status APPROVED or SENT excluding the status u201CPOSTEDu201D. IMG Configuration for workflow: 1) WS12300111 u2013 New Requ
-
Hello together, when sending a message e.g. via internet from a process chain the complete job log is added to the message. In some cases the message gets very long and often it is enough to send a short message (e.g. "Error in loading XY"). Is it po
-
Cfmap with CF9.01 and Google map v3
The information I've seen indicates there is a hotfix for CF9.01 which will allow the cfmap tag to work with Google maps v3. We have installed the latest hot fixes. I obtain an error when trying to use the Google maps v3 API key with the cfmap tag